From: "Marek Behún" <kabel@kernel.org>
To: "Andrew Lunn" <andrew@lunn.ch>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
linux-arm-kernel@lists.infradead.org, arm@kernel.org,
"Andy Shevchenko" <andy@kernel.org>,
"Hans de Goede" <hdegoede@redhat.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: "Marek Behún" <kabel@kernel.org>
Subject: [PATCH 01/10] irqchip/armada-370-xp: Use consistent variable names for hwirqs
Date: Thu, 11 Jul 2024 18:08:58 +0200 [thread overview]
Message-ID: <20240711160907.31012-2-kabel@kernel.org> (raw)
In-Reply-To: <20240711160907.31012-1-kabel@kernel.org>
Use consistent variable names for hwirqs: when iterating, use "i",
otherwise use "hwirq".
Signed-off-by: Marek Behún <kabel@kernel.org>
---
drivers/irqchip/irq-armada-370-xp.c | 56 ++++++++++++++---------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index be1c3721f980..a710a325f81a 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -117,7 +117,7 @@
#define MPIC_SW_TRIG_INT 0x04
#define MPIC_INT_SET_ENABLE 0x30
#define MPIC_INT_CLEAR_ENABLE 0x34
-#define MPIC_INT_SOURCE_CTL(irq) (0x100 + (irq) * 4)
+#define MPIC_INT_SOURCE_CTL(hwirq) (0x100 + (hwirq) * 4)
#define MPIC_INT_SOURCE_CPU_MASK GENMASK(3, 0)
#define MPIC_INT_IRQ_FIQ_MASK(cpuid) ((BIT(0) | BIT(8)) << (cpuid))
@@ -199,9 +199,9 @@ static inline unsigned int msi_doorbell_end(void)
PCI_MSI_FULL_DOORBELL_END;
}
-static inline bool mpic_is_percpu_irq(irq_hw_number_t irq)
+static inline bool mpic_is_percpu_irq(irq_hw_number_t hwirq)
{
- return irq <= MPIC_MAX_PER_CPU_IRQS;
+ return hwirq <= MPIC_MAX_PER_CPU_IRQS;
}
/*
@@ -530,11 +530,11 @@ static void mpic_smp_cpu_init(void)
static void mpic_reenable_percpu(void)
{
/* Re-enable per-CPU interrupts that were enabled before suspend */
- for (unsigned int irq = 0; irq < MPIC_MAX_PER_CPU_IRQS; irq++) {
+ for (unsigned int i = 0; i < MPIC_MAX_PER_CPU_IRQS; i++) {
struct irq_data *data;
unsigned int virq;
- virq = irq_linear_revmap(mpic_domain, irq);
+ virq = irq_linear_revmap(mpic_domain, i);
if (!virq)
continue;
@@ -586,20 +586,20 @@ static struct irq_chip mpic_irq_chip = {
};
static int mpic_irq_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
+ irq_hw_number_t hwirq)
{
/* IRQs 0 and 1 cannot be mapped, they are handled internally */
- if (hw <= 1)
+ if (hwirq <= 1)
return -EINVAL;
mpic_irq_mask(irq_get_irq_data(virq));
- if (!mpic_is_percpu_irq(hw))
- writel(hw, per_cpu_int_base + MPIC_INT_CLEAR_MASK);
+ if (!mpic_is_percpu_irq(hwirq))
+ writel(hwirq, per_cpu_int_base + MPIC_INT_CLEAR_MASK);
else
- writel(hw, main_int_base + MPIC_INT_SET_ENABLE);
+ writel(hwirq, main_int_base + MPIC_INT_SET_ENABLE);
irq_set_status_flags(virq, IRQ_LEVEL);
- if (mpic_is_percpu_irq(hw)) {
+ if (mpic_is_percpu_irq(hwirq)) {
irq_set_percpu_devid(virq);
irq_set_chip_and_handler(virq, &mpic_irq_chip,
handle_percpu_devid_irq);
@@ -654,15 +654,15 @@ static inline void mpic_handle_ipi_irq(void) {}
static void mpic_handle_cascade_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
- unsigned long irqmap, irqn, irqsrc, cpuid;
+ unsigned long irqmap, i, irqsrc, cpuid;
chained_irq_enter(chip, desc);
irqmap = readl_relaxed(per_cpu_int_base + MPIC_PPI_CAUSE);
cpuid = cpu_logical_map(smp_processor_id());
- for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) {
- irqsrc = readl_relaxed(main_int_base + MPIC_INT_SOURCE_CTL(irqn));
+ for_each_set_bit(i, &irqmap, BITS_PER_LONG) {
+ irqsrc = readl_relaxed(main_int_base + MPIC_INT_SOURCE_CTL(i));
/* Check if the interrupt is not masked on current CPU.
* Test IRQ (0-1) and FIQ (8-9) mask bits.
@@ -670,12 +670,12 @@ static void mpic_handle_cascade_irq(struct irq_desc *desc)
if (!(irqsrc & MPIC_INT_IRQ_FIQ_MASK(cpuid)))
continue;
- if (irqn == 0 || irqn == 1) {
+ if (i == 0 || i == 1) {
mpic_handle_msi_irq();
continue;
}
- generic_handle_domain_irq(mpic_domain, irqn);
+ generic_handle_domain_irq(mpic_domain, i);
}
chained_irq_exit(chip, desc);
@@ -683,26 +683,26 @@ static void mpic_handle_cascade_irq(struct irq_desc *desc)
static void __exception_irq_entry mpic_handle_irq(struct pt_regs *regs)
{
- u32 irqstat, irqnr;
+ u32 irqstat, i;
do {
irqstat = readl_relaxed(per_cpu_int_base + MPIC_CPU_INTACK);
- irqnr = FIELD_GET(MPIC_CPU_INTACK_IID_MASK, irqstat);
+ i = FIELD_GET(MPIC_CPU_INTACK_IID_MASK, irqstat);
- if (irqnr > 1022)
+ if (i > 1022)
break;
- if (irqnr > 1) {
- generic_handle_domain_irq(mpic_domain, irqnr);
+ if (i > 1) {
+ generic_handle_domain_irq(mpic_domain, i);
continue;
}
/* MSI handling */
- if (irqnr == 1)
+ if (i == 1)
mpic_handle_msi_irq();
/* IPI Handling */
- if (irqnr == 0)
+ if (i == 0)
mpic_handle_ipi_irq();
} while (1);
}
@@ -719,24 +719,24 @@ static void mpic_resume(void)
bool src0, src1;
/* Re-enable interrupts */
- for (irq_hw_number_t irq = 0; irq < mpic_domain->hwirq_max; irq++) {
+ for (irq_hw_number_t i = 0; i < mpic_domain->hwirq_max; i++) {
struct irq_data *data;
unsigned int virq;
- virq = irq_linear_revmap(mpic_domain, irq);
+ virq = irq_linear_revmap(mpic_domain, i);
if (!virq)
continue;
data = irq_get_irq_data(virq);
- if (!mpic_is_percpu_irq(irq)) {
+ if (!mpic_is_percpu_irq(i)) {
/* Non per-CPU interrupts */
- writel(irq, per_cpu_int_base + MPIC_INT_CLEAR_MASK);
+ writel(i, per_cpu_int_base + MPIC_INT_CLEAR_MASK);
if (!irqd_irq_disabled(data))
mpic_irq_unmask(data);
} else {
/* Per-CPU interrupts */
- writel(irq, main_int_base + MPIC_INT_SET_ENABLE);
+ writel(i, main_int_base + MPIC_INT_SET_ENABLE);
/*
* Re-enable on the current CPU, mpic_reenable_percpu()
--
2.44.2
next prev parent reply other threads:[~2024-07-11 16:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-11 16:08 [PATCH 00/10] armada-370-xp irqchip updates round 4 Marek Behún
2024-07-11 16:08 ` Marek Behún [this message]
2024-07-11 16:08 ` [PATCH 02/10] irqchip/armada-370-xp: Use consistent types when iterating interrupts Marek Behún
2024-07-11 16:09 ` [PATCH 03/10] irqchip/armada-370-xp: Use consistent name for struct irq_data variables Marek Behún
2024-07-11 16:09 ` [PATCH 04/10] irqchip/armada-370-xp: Simplify mpic_reenable_percpu() and mpic_resume() Marek Behún
2024-07-11 16:09 ` [PATCH 05/10] irqchip/armada-370-xp: Drop unneeded curly brackets Marek Behún
2024-07-29 8:52 ` Thomas Gleixner
2024-07-11 16:09 ` [PATCH 06/10] irqchip/armada-370-xp: Drop redundant continue Marek Behún
2024-07-11 16:09 ` [PATCH 07/10] irqchip/armada-370-xp: Rename variable for consistency Marek Behún
2024-07-11 16:09 ` [PATCH 08/10] irqchip/armada-370-xp: Use u32 type instead of unsigned long where possieble Marek Behún
2024-07-11 16:09 ` [PATCH 09/10] irqchip/armada-370-xp: Refactor initial memory regions mapping Marek Behún
2024-07-11 16:09 ` [PATCH 10/10] irqchip/armada-370-xp: Print error and return error code on initialization failure Marek Behún
2024-07-11 20:56 ` [PATCH 00/10] armada-370-xp irqchip updates round 4 Thomas Gleixner
2024-07-12 7:46 ` Marek Behún
2024-07-12 22:19 ` Thomas Gleixner
2024-07-29 9:44 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240711160907.31012-2-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=andrew@lunn.ch \
--cc=andy@kernel.org \
--cc=arm@kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).