From: Jim Quinlan <james.quinlan@broadcom.com>
To: linux-pci@vger.kernel.org,
Nicolas Saenz Julienne <nsaenz@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Cyril Brulebois <kibi@debian.org>,
Stanimir Varbanov <svarbanov@suse.de>,
Krzysztof Kozlowski <krzk@kernel.org>,
bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com,
james.quinlan@broadcom.com
Cc: "Florian Fainelli" <florian.fainelli@broadcom.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v4 06/12] PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific
Date: Tue, 16 Jul 2024 17:31:21 -0400 [thread overview]
Message-ID: <20240716213131.6036-7-james.quinlan@broadcom.com> (raw)
In-Reply-To: <20240716213131.6036-1-james.quinlan@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 5616 bytes --]
Our HW design has again changed a register offset which used to be standard
for all Broadcom SOCs with PCIe cores. This difference is now reconciled
for the registers HARD_DEBUG and INTR2_CPU_BASE.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
drivers/pci/controller/pcie-brcmstb.c | 39 ++++++++++++++++-----------
1 file changed, 24 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 4dc2ff7f3167..073d790d97b7 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -122,7 +122,6 @@
#define PCIE_MEM_WIN0_LIMIT_HI(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
-#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK 0x200000
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
@@ -131,9 +130,9 @@
(PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK | \
PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK)
-#define PCIE_INTR2_CPU_BASE 0x4300
#define PCIE_MSI_INTR2_BASE 0x4500
-/* Offsets from PCIE_INTR2_CPU_BASE and PCIE_MSI_INTR2_BASE */
+
+/* Offsets from INTR2_CPU and MSI_INTR2 BASE offsets */
#define MSI_INT_STATUS 0x0
#define MSI_INT_CLR 0x8
#define MSI_INT_MASK_SET 0x10
@@ -184,9 +183,11 @@
#define SSC_STATUS_PLL_LOCK_MASK 0x800
#define PCIE_BRCM_MAX_MEMC 3
-#define IDX_ADDR(pcie) (pcie->reg_offsets[EXT_CFG_INDEX])
-#define DATA_ADDR(pcie) (pcie->reg_offsets[EXT_CFG_DATA])
-#define PCIE_RGR1_SW_INIT_1(pcie) (pcie->reg_offsets[RGR1_SW_INIT_1])
+#define IDX_ADDR(pcie) ((pcie)->reg_offsets[EXT_CFG_INDEX])
+#define DATA_ADDR(pcie) ((pcie)->reg_offsets[EXT_CFG_DATA])
+#define PCIE_RGR1_SW_INIT_1(pcie) ((pcie)->reg_offsets[RGR1_SW_INIT_1])
+#define HARD_DEBUG(pcie) ((pcie)->reg_offsets[PCIE_HARD_DEBUG])
+#define INTR2_CPU_BASE(pcie) ((pcie)->reg_offsets[PCIE_INTR2_CPU_BASE])
/* Rescal registers */
#define PCIE_DVT_PMU_PCIE_PHY_CTRL 0xc700
@@ -205,6 +206,8 @@ enum {
RGR1_SW_INIT_1,
EXT_CFG_INDEX,
EXT_CFG_DATA,
+ PCIE_HARD_DEBUG,
+ PCIE_INTR2_CPU_BASE,
};
enum {
@@ -651,7 +654,7 @@ static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
BUILD_BUG_ON(BRCM_INT_PCI_MSI_LEGACY_NR > BRCM_INT_PCI_MSI_NR);
if (msi->legacy) {
- msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE;
+ msi->intr_base = msi->base + INTR2_CPU_BASE(pcie);
msi->nr = BRCM_INT_PCI_MSI_LEGACY_NR;
msi->legacy_shift = 24;
} else {
@@ -898,12 +901,12 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
/* Take the bridge out of reset */
pcie->bridge_sw_init_set(pcie, 0);
- tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+ tmp = readl(base + HARD_DEBUG(pcie));
if (is_bmips(pcie))
tmp &= ~PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
else
tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
- writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+ writel(tmp, base + HARD_DEBUG(pcie));
/* Wait for SerDes to be stable */
usleep_range(100, 200);
@@ -1072,7 +1075,7 @@ static void brcm_config_clkreq(struct brcm_pcie *pcie)
}
/* Start out assuming safe mode (both mode bits cleared) */
- clkreq_cntl = readl(pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+ clkreq_cntl = readl(pcie->base + HARD_DEBUG(pcie));
clkreq_cntl &= ~PCIE_CLKREQ_MASK;
if (strcmp(mode, "no-l1ss") == 0) {
@@ -1115,7 +1118,7 @@ static void brcm_config_clkreq(struct brcm_pcie *pcie)
dev_err(pcie->dev, err_msg);
mode = "safe";
}
- writel(clkreq_cntl, pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+ writel(clkreq_cntl, pcie->base + HARD_DEBUG(pcie));
dev_info(pcie->dev, "clkreq-mode set to %s\n", mode);
}
@@ -1337,9 +1340,9 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
writel(tmp, base + PCIE_MISC_PCIE_CTRL);
/* Turn off SerDes */
- tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+ tmp = readl(base + HARD_DEBUG(pcie));
u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
- writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+ writel(tmp, base + HARD_DEBUG(pcie));
/* Shutdown PCIe bridge */
pcie->bridge_sw_init_set(pcie, 1);
@@ -1425,9 +1428,9 @@ static int brcm_pcie_resume_noirq(struct device *dev)
pcie->bridge_sw_init_set(pcie, 0);
/* SERDES_IDDQ = 0 */
- tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+ tmp = readl(base + HARD_DEBUG(pcie));
u32p_replace_bits(&tmp, 0, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
- writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+ writel(tmp, base + HARD_DEBUG(pcie));
/* wait for serdes to be stable */
udelay(100);
@@ -1499,12 +1502,16 @@ static const int pcie_offsets[] = {
[RGR1_SW_INIT_1] = 0x9210,
[EXT_CFG_INDEX] = 0x9000,
[EXT_CFG_DATA] = 0x9004,
+ [PCIE_HARD_DEBUG] = 0x4204,
+ [PCIE_INTR2_CPU_BASE] = 0x4300,
};
static const int pcie_offsets_bmips_7425[] = {
[RGR1_SW_INIT_1] = 0x8010,
[EXT_CFG_INDEX] = 0x8300,
[EXT_CFG_DATA] = 0x8304,
+ [PCIE_HARD_DEBUG] = 0x4204,
+ [PCIE_INTR2_CPU_BASE] = 0x4300,
};
static const struct pcie_cfg_data generic_cfg = {
@@ -1539,6 +1546,8 @@ static const int pcie_offset_bcm7278[] = {
[RGR1_SW_INIT_1] = 0xc010,
[EXT_CFG_INDEX] = 0x9000,
[EXT_CFG_DATA] = 0x9004,
+ [PCIE_HARD_DEBUG] = 0x4204,
+ [PCIE_INTR2_CPU_BASE] = 0x4300,
};
static const struct pcie_cfg_data bcm7278_cfg = {
--
2.17.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4210 bytes --]
next prev parent reply other threads:[~2024-07-16 21:34 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-16 21:31 [PATCH v4 00/12] PCI: brcnstb: Enable STB 7712 SOC Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 01/12] dt-bindings: PCI: Cleanup of brcmstb YAML and add 7712 SoC Jim Quinlan
2024-07-17 6:51 ` Krzysztof Kozlowski
2024-07-17 13:20 ` Jim Quinlan
2024-07-17 13:30 ` Krzysztof Kozlowski
2024-07-23 18:49 ` Jim Quinlan
2024-07-17 21:06 ` Florian Fainelli
2024-07-18 6:02 ` Krzysztof Kozlowski
2024-07-18 6:07 ` Krzysztof Kozlowski
2024-07-23 18:44 ` Jim Quinlan
2024-07-24 8:05 ` Krzysztof Kozlowski
2024-07-24 18:57 ` Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 02/12] dt-bindings: PCI: brcmstb: Add 7712 SoC description Jim Quinlan
2024-07-17 6:52 ` Krzysztof Kozlowski
2024-07-23 21:03 ` Jim Quinlan
2024-07-24 6:02 ` Krzysztof Kozlowski
2024-07-16 21:31 ` [PATCH v4 03/12] PCI: brcmstb: Use common error handling code in brcm_pcie_probe() Jim Quinlan
2024-07-25 4:31 ` Manivannan Sadhasivam
2024-07-25 19:45 ` Jim Quinlan
2024-07-26 5:04 ` Manivannan Sadhasivam
2024-07-26 18:34 ` Jim Quinlan
2024-07-27 6:40 ` Manivannan Sadhasivam
2024-07-29 15:24 ` Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 04/12] PCI: brcmstb: Use bridge reset if available Jim Quinlan
2024-07-25 4:37 ` Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 05/12] PCI: brcmstb: Use swinit " Jim Quinlan
2024-07-25 4:39 ` Manivannan Sadhasivam
2024-07-29 21:49 ` Jim Quinlan
2024-07-16 21:31 ` Jim Quinlan [this message]
2024-07-25 4:43 ` [PATCH v4 06/12] PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 07/12] PCI: brcmstb: Remove two unused constants from driver Jim Quinlan
2024-07-25 4:43 ` Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 08/12] PCI: brcmstb: Don't conflate the reset rescal with phy ctrl Jim Quinlan
2024-07-25 4:48 ` Manivannan Sadhasivam
2024-07-26 19:03 ` Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 09/12] PCI: brcmstb: Refactor for chips with many regular inbound BARs Jim Quinlan
2024-07-25 4:53 ` Manivannan Sadhasivam
2024-07-25 20:29 ` Jim Quinlan
2024-07-26 5:08 ` Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 10/12] PCI: brcmstb: Check return value of all reset_control_xxx calls Jim Quinlan
2024-07-16 21:31 ` [PATCH v4 11/12] PCI: brcmstb: Change field name from 'type' to 'model' Jim Quinlan
2024-07-25 4:58 ` Manivannan Sadhasivam
2024-07-25 20:38 ` Jim Quinlan
2024-07-26 11:29 ` Manivannan Sadhasivam
2024-07-16 21:31 ` [PATCH v4 12/12] PCI: brcmstb: Enable 7712 SOCs Jim Quinlan
2024-07-25 4:59 ` Manivannan Sadhasivam
2024-07-25 5:03 ` [PATCH v4 00/12] PCI: brcnstb: Enable STB 7712 SOC Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240716213131.6036-7-james.quinlan@broadcom.com \
--to=james.quinlan@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=jim2101024@gmail.com \
--cc=kibi@debian.org \
--cc=krzk@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=lpieralisi@kernel.org \
--cc=nsaenz@kernel.org \
--cc=robh@kernel.org \
--cc=svarbanov@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).