Re: [PATCH] PCI: j721e: Set .map_irq and .swizzle_irq to NULL

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Wed, Jul 24, 2024 at 12:20:48PM +0530, Siddharth Vadapalli wrote:
> Since the configuration of Legacy Interrupts (INTx) is not supported, set
> the .map_irq and .swizzle_irq callbacks to NULL. This fixes the error:
>   of_irq_parse_pci: failed with rc=-22
> due to the absence of Legacy Interrupts in the device-tree.
> 

Do you really need to set 'swizzle_irq' to NULL? pci_assign_irq() will bail out
if 'map_irq' is set to NULL.

- Mani

> Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver")
> Reported-by: Andrew Halaney <ahalaney@redhat.com>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
> 
> Hello,
> 
> This patch is based on commit
> 786c8248dbd3 Merge tag 'perf-tools-fixes-for-v6.11-2024-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
> of Mainline Linux.
> 
> Patch has been tested on J784S4-EVM and J721e-EVM, both of which have
> the PCIe Controller configured by the pci-j721e.c driver.
> 
> Regards,
> Siddharth.
> 
>  drivers/pci/controller/cadence/pci-j721e.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> index 85718246016b..5372218849a8 100644
> --- a/drivers/pci/controller/cadence/pci-j721e.c
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -417,6 +417,10 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>  		if (!bridge)
>  			return -ENOMEM;
>  
> +		/* Legacy interrupts are not supported */
> +		bridge->map_irq = NULL;
> +		bridge->swizzle_irq = NULL;
> +
>  		if (!data->byte_access_allowed)
>  			bridge->ops = &cdns_ti_pcie_host_ops;
>  		rc = pci_host_bridge_priv(bridge);
> -- 
> 2.40.1
> 
> 

-- 
மணிவண்ணன் சதாசிவம்