linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Herve Codina <herve.codina@bootlin.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Qiang Zhao <qiang.zhao@nxp.com>, Li Yang <leoyang.li@nxp.com>,
	Mark Brown <broonie@kernel.org>,
	linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v1 23/36] dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) QMC controller
Date: Tue, 30 Jul 2024 13:36:35 -0600	[thread overview]
Message-ID: <20240730193635.GA2017245-robh@kernel.org> (raw)
In-Reply-To: <20240729142107.104574-24-herve.codina@bootlin.com>

On Mon, Jul 29, 2024 at 04:20:52PM +0200, Herve Codina wrote:
> Add support for the QMC (QUICC Multichannel Controller) available in
> some PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
> 
> This QE QMC is similar to the CPM QMC except that it uses UCCs (Unified
> Communication Controllers) instead of SCCs (Serial Communication
> Controllers). Also, compared against the CPM QMC, this QE QMC does not
> use a fixed area for the UCC/SCC parameters area but it uses a dynamic
> area allocated and provided to the hardware at runtime.
> Last point, the QE QMC can use a firmware to have the QMC working in
> 'soft-qmc' mode.
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> ---
>  .../soc/fsl/cpm_qe/fsl,qe-ucc-qmc.yaml        | 197 ++++++++++++++++++
>  1 file changed, 197 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ucc-qmc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ucc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ucc-qmc.yaml
> new file mode 100644
> index 000000000000..1215b2de36e6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ucc-qmc.yaml
> @@ -0,0 +1,197 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ucc-qmc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PowerQUICC QE QUICC Multichannel Controller (QMC)
> +
> +maintainers:
> +  - Herve Codina <herve.codina@bootlin.com>
> +
> +description:
> +  The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one
> +  serial controller using the same TDM physical interface routed from TSA.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - fsl,mpc8321-ucc-qmc
> +      - const: fsl,qe-ucc-qmc
> +
> +  reg:
> +    items:
> +      - description: UCC (Unified communication controller) register base
> +      - description: Dual port ram base
> +
> +  reg-names:
> +    items:
> +      - const: ucc_regs
> +      - const: dpram
> +
> +  interrupts:
> +    maxItems: 1
> +    description: UCC interrupt line in the QE interrupt controller
> +
> +  fsl,tsa-serial:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - items:
> +          - description: phandle to TSA node
> +          - enum: [1, 2, 3, 4, 5]
> +            description: |
> +              TSA serial interface (dt-bindings/soc/qe-fsl,tsa.h defines these
> +              values)
> +               - 1: UCC1
> +               - 2: UCC2
> +               - 3: UCC3
> +               - 4: UCC4
> +               - 5: UCC5
> +    description:
> +      Should be a phandle/number pair. The phandle to TSA node and the TSA
> +      serial interface to use.
> +
> +  fsl,soft-qmc:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      Soft QMC firmware name to load. If this property is omitted, no firmware
> +      are used.
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +patternProperties:
> +  '^channel@([0-9]|[1-5][0-9]|6[0-3])$':

Unit-addresses are typically in hex.

> +    description:
> +      A channel managed by this controller
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      reg:
> +        minimum: 0
> +        maximum: 63
> +        description:
> +          The channel number
> +
> +      fsl,operational-mode:
> +        $ref: /schemas/types.yaml#/definitions/string
> +        enum: [transparent, hdlc]
> +        default: transparent
> +        description: |
> +          The channel operational mode
> +            - hdlc: The channel handles HDLC frames
> +            - transparent: The channel handles raw data without any processing
> +
> +      fsl,reverse-data:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        description:
> +          The bit order as seen on the channels is reversed,
> +          transmitting/receiving the MSB of each octet first.
> +          This flag is used only in 'transparent' mode.
> +
> +      fsl,tx-ts-mask:
> +        $ref: /schemas/types.yaml#/definitions/uint64
> +        description:
> +          Channel assigned Tx time-slots within the Tx time-slots routed by the
> +          TSA to this cell.
> +
> +      fsl,rx-ts-mask:
> +        $ref: /schemas/types.yaml#/definitions/uint64
> +        description:
> +          Channel assigned Rx time-slots within the Rx time-slots routed by the
> +          TSA to this cell.
> +
> +      compatible:

compatible goes first in the list.

> +        items:
> +          - enum:
> +              - fsl,mpc8321-ucc-qmc-hdlc
> +          - const: fsl,qe-ucc-qmc-hdlc
> +          - const: fsl,qmc-hdlc

Really need 3 compatibles?

> +
> +      fsl,framer:
> +        $ref: /schemas/types.yaml#/definitions/phandle
> +        description:
> +          phandle to the framer node. The framer is in charge of an E1/T1 line
> +          interface connected to the TDM bus. It can be used to get the E1/T1 line
> +          status such as link up/down.
> +
> +    allOf:
> +      - if:
> +          properties:
> +            compatible:
> +              not:
> +                contains:
> +                  const: fsl,qmc-hdlc
> +        then:
> +          properties:
> +            fsl,framer: false
> +
> +    required:
> +      - reg
> +      - fsl,tx-ts-mask
> +      - fsl,rx-ts-mask
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - fsl,tsa-serial
> +  - '#address-cells'
> +  - '#size-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/soc/qe-fsl,tsa.h>
> +
> +    qmc@a60 {
> +        compatible = "fsl,mpc8321-ucc-qmc", "fsl,qe-ucc-qmc";
> +        reg = <0x3200 0x200>,
> +              <0x10000 0x1000>;
> +        reg-names = "ucc_regs", "dpram";
> +        interrupts = <35>;
> +        interrupt-parent = <&qeic>;
> +        fsl,soft-qmc = "fsl_qe_ucode_qmc_8321_11.bin";
> +
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        fsl,tsa-serial = <&tsa FSL_QE_TSA_UCC4>;
> +
> +        channel@16 {
> +            /* Ch16 : First 4 even TS from all routed from TSA */
> +            reg = <16>;
> +            fsl,operational-mode = "transparent";
> +            fsl,reverse-data;
> +            fsl,tx-ts-mask = <0x00000000 0x000000aa>;
> +            fsl,rx-ts-mask = <0x00000000 0x000000aa>;
> +        };
> +
> +        channel@17 {
> +            /* Ch17 : First 4 odd TS from all routed from TSA */
> +            reg = <17>;
> +            fsl,operational-mode = "transparent";
> +            fsl,reverse-data;
> +            fsl,tx-ts-mask = <0x00000000 0x00000055>;
> +            fsl,rx-ts-mask = <0x00000000 0x00000055>;
> +        };
> +
> +        channel@19 {
> +            /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */
> +            compatible = "fsl,mpc8321-ucc-qmc-hdlc",
> +                         "fsl,qe-ucc-qmc-hdlc",
> +                         "fsl,qmc-hdlc";
> +            reg = <19>;
> +            fsl,operational-mode = "hdlc";
> +            fsl,tx-ts-mask = <0x00000000 0x0000ff00>;
> +            fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
> +            fsl,framer = <&framer>;
> +        };
> +    };
> -- 
> 2.45.0
> 


  reply	other threads:[~2024-07-30 19:37 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-29 14:20 [PATCH v1 00/36] soc: fsl: Add support for QUICC Engine TSA and QMC Herve Codina
2024-07-29 14:20 ` [PATCH v1 01/36] soc: fsl: cpm1: qmc: Update TRNSYNC only in transparent mode Herve Codina
2024-07-29 14:20 ` [PATCH v1 02/36] soc: fsl: cpm1: qmc: Enable TRNSYNC only when needed Herve Codina
2024-07-29 14:20 ` [PATCH v1 03/36] soc: fsl: cpm1: tsa: Fix tsa_write8() Herve Codina
2024-07-29 14:20 ` [PATCH v1 04/36] soc: fsl: cpm1: tsa: Use BIT(), GENMASK() and FIELD_PREP() macros Herve Codina
2024-07-29 14:20 ` [PATCH v1 05/36] soc: fsl: cpm1: tsa: Fix blank line and spaces Herve Codina
2024-07-29 14:20 ` [PATCH v1 06/36] soc: fsl: cpm1: tsa: Add missing spinlock comment Herve Codina
2024-07-29 14:20 ` [PATCH v1 07/36] dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) TSA controller Herve Codina
2024-07-30 19:29   ` Rob Herring
2024-07-29 14:20 ` [PATCH v1 08/36] soc: fsl: cpm1: tsa: Remove unused registers offset definition Herve Codina
2024-07-29 14:20 ` [PATCH v1 09/36] soc: fsl: cpm1: tsa: Use ARRAY_SIZE() instead of hardcoded integer values Herve Codina
2024-07-29 14:20 ` [PATCH v1 10/36] soc: fsl: cpm1: tsa: Make SIRAM entries specific to CPM1 Herve Codina
2024-07-29 14:20 ` [PATCH v1 11/36] soc: fsl: cpm1: tsa: Introduce tsa_setup() and its CPM1 compatible version Herve Codina
2024-07-29 14:20 ` [PATCH v1 12/36] soc: fsl: cpm1: tsa: Isolate specific CPM1 part from tsa_serial_{dis}connect() Herve Codina
2024-07-29 14:20 ` [PATCH v1 13/36] soc: fsl: cpm1: tsa: Introduce tsa_version Herve Codina
2024-07-29 14:20 ` [PATCH v1 14/36] soc: fsl: cpm1: tsa: Add support for QUICC Engine (QE) implementation Herve Codina
2024-07-30  1:43   ` kernel test robot
2024-07-30  9:25   ` [PATCH " Markus Elfring
2024-07-29 14:20 ` [PATCH v1 15/36] MAINTAINERS: Add QE files related to the Freescale TSA controller Herve Codina
2024-07-29 14:20 ` [PATCH v1 16/36] soc: fsl: cpm1: tsa: Introduce tsa_serial_get_num() Herve Codina
2024-07-29 14:20 ` [PATCH v1 17/36] soc: fsl: cpm1: qmc: Rename QMC_TSA_MASK Herve Codina
2024-07-29 14:20 ` [PATCH v1 18/36] soc: fsl: cpm1: qmc: Use BIT(), GENMASK() and FIELD_PREP() macros Herve Codina
2024-07-29 14:20 ` [PATCH v1 19/36] soc: fsl: cpm1: qmc: Fix blank line and spaces Herve Codina
2024-07-29 14:20 ` [PATCH v1 20/36] soc: fsl: cpm1: qmc: Remove unneeded parenthesis Herve Codina
2024-07-29 14:20 ` [PATCH v1 21/36] soc: fsl: cpm1: qmc: Fix 'transmiter' typo Herve Codina
2024-07-29 14:20 ` [PATCH v1 22/36] soc: fsl: cpm1: qmc: Add missing spinlock comment Herve Codina
2024-07-29 14:20 ` [PATCH v1 23/36] dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) QMC controller Herve Codina
2024-07-30 19:36   ` Rob Herring [this message]
2024-08-05  6:43     ` Herve Codina
2024-07-29 14:20 ` [PATCH v1 24/36] soc: fsl: cpm1: qmc: Introduce qmc_data structure Herve Codina
2024-07-29 14:20 ` [PATCH v1 25/36] soc: fsl: cpm1: qmc: Re-order probe() operations Herve Codina
2024-07-29 14:20 ` [PATCH v1 26/36] soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version Herve Codina
2024-07-29 14:20 ` [PATCH v1 27/36] soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their " Herve Codina
2024-07-29 14:20 ` [PATCH v1 28/36] soc: fsl: cpm1: qmc: Rename qmc_chan_command() Herve Codina
2024-07-29 14:20 ` [PATCH v1 29/36] soc: fsl: cpm1: qmc: Handle RPACK initialization Herve Codina
2024-07-29 14:20 ` [PATCH v1 30/36] soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC Herve Codina
2024-07-29 14:21 ` [PATCH v1 31/36] soc: fsl: cpm1: qmc: Introduce qmc_version Herve Codina
2024-07-29 14:21 ` [PATCH v1 32/36] soc: fsl: qe: Add resource-managed muram allocators Herve Codina
2024-07-30  2:46   ` kernel test robot
2024-07-30  3:10   ` kernel test robot
2024-07-29 14:21 ` [PATCH v1 33/36] soc: fsl: qe: Add missing PUSHSCHED command Herve Codina
2024-07-29 14:21 ` [PATCH v1 34/36] soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation Herve Codina
2024-07-29 14:21 ` [PATCH v1 35/36] soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware Herve Codina
2024-07-29 14:21 ` [PATCH v1 36/36] MAINTAINERS: Add QE files related to the Freescale QMC controller Herve Codina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240730193635.GA2017245-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=broonie@kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=herve.codina@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=qiang.zhao@nxp.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).