[PATCH 2/2] arm64: dts: ti: k3-j721e-beagleboneai64: Fix reversed C6x carveout locations

[Andrew Davis <afd@ti.com>]

The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.

Fixes: fae14a1cb8dd ("arm64: dts: ti: Add k3-j721e-beagleboneai64")
Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index a2925555fe818..fb899c99753ec 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -123,7 +123,7 @@ main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
 			no-map;
 		};
 
-		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+		c66_0_dma_memory_region: c66-dma-memory@a6000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa6000000 0x00 0x100000>;
 			no-map;
@@ -135,7 +135,7 @@ c66_0_memory_region: c66-memory@a6100000 {
 			no-map;
 		};
 
-		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+		c66_1_dma_memory_region: c66-dma-memory@a7000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa7000000 0x00 0x100000>;
 			no-map;
-- 
2.39.2