[PATCH 01/19] arm/bL_switcher: Use kthread_run_on_cpu()

[PATCH 01/19] arm/bL_switcher: Use kthread_run_on_cpu()

[Frederic Weisbecker]

Use the proper API instead of open coding it.

Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
---
 arch/arm/common/bL_switcher.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
index 9a9aa53547a6..d1e82a318e3b 100644
--- a/arch/arm/common/bL_switcher.c
+++ b/arch/arm/common/bL_switcher.c
@@ -307,13 +307,11 @@ static struct task_struct *bL_switcher_thread_create(int cpu, void *arg)
 {
 	struct task_struct *task;
 
-	task = kthread_create_on_node(bL_switcher_thread, arg,
-				      cpu_to_node(cpu), "kswitcher_%d", cpu);
-	if (!IS_ERR(task)) {
-		kthread_bind(task, cpu);
-		wake_up_process(task);
-	} else
+	task = kthread_run_on_cpu(bL_switcher_thread, arg,
+				  cpu, "kswitcher_%d");
+	if (IS_ERR(task))
 		pr_err("%s failed for CPU %d\n", __func__, cpu);
+
 	return task;
 }
 
-- 
2.45.2

[PATCH 07/19] soc/qman: test: Use kthread_run_on_cpu()

[Frederic Weisbecker]

Use the proper API instead of open coding it.

However it looks like kthreads here could be replaced by the use of a
per-cpu workqueue instead.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
---
 drivers/soc/fsl/qbman/qman_test_stash.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/fsl/qbman/qman_test_stash.c b/drivers/soc/fsl/qbman/qman_test_stash.c
index b7e8e5ec884c..f4d3c2146f4f 100644
--- a/drivers/soc/fsl/qbman/qman_test_stash.c
+++ b/drivers/soc/fsl/qbman/qman_test_stash.c
@@ -108,14 +108,12 @@ static int on_all_cpus(int (*fn)(void))
 			.fn = fn,
 			.started = ATOMIC_INIT(0)
 		};
-		struct task_struct *k = kthread_create(bstrap_fn, &bstrap,
-			"hotpotato%d", cpu);
+		struct task_struct *k = kthread_run_on_cpu(bstrap_fn, &bstrap,
+							   cpu, "hotpotato%d");
 		int ret;
 
 		if (IS_ERR(k))
 			return -ENOMEM;
-		kthread_bind(k, cpu);
-		wake_up_process(k);
 		/*
 		 * If we call kthread_stop() before the "wake up" has had an
 		 * effect, then the thread may exit with -EINTR without ever
-- 
2.45.2

[PATCH 01/19] arm/bL_switcher: Use kthread_run_on_cpu()

[Frederic Weisbecker]

Use the proper API instead of open coding it.

Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
---
 arch/arm/common/bL_switcher.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
index 9a9aa53547a6..d1e82a318e3b 100644
--- a/arch/arm/common/bL_switcher.c
+++ b/arch/arm/common/bL_switcher.c
@@ -307,13 +307,11 @@ static struct task_struct *bL_switcher_thread_create(int cpu, void *arg)
 {
 	struct task_struct *task;
 
-	task = kthread_create_on_node(bL_switcher_thread, arg,
-				      cpu_to_node(cpu), "kswitcher_%d", cpu);
-	if (!IS_ERR(task)) {
-		kthread_bind(task, cpu);
-		wake_up_process(task);
-	} else
+	task = kthread_run_on_cpu(bL_switcher_thread, arg,
+				  cpu, "kswitcher_%d");
+	if (IS_ERR(task))
 		pr_err("%s failed for CPU %d\n", __func__, cpu);
+
 	return task;
 }
 
-- 
2.46.0

[PATCH 01/19] arm/bL_switcher: Use kthread_run_on_cpu()

[Frederic Weisbecker]

Use the proper API instead of open coding it.

Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
---
 arch/arm/common/bL_switcher.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
index 9a9aa53547a6..d1e82a318e3b 100644
--- a/arch/arm/common/bL_switcher.c
+++ b/arch/arm/common/bL_switcher.c
@@ -307,13 +307,11 @@ static struct task_struct *bL_switcher_thread_create(int cpu, void *arg)
 {
 	struct task_struct *task;
 
-	task = kthread_create_on_node(bL_switcher_thread, arg,
-				      cpu_to_node(cpu), "kswitcher_%d", cpu);
-	if (!IS_ERR(task)) {
-		kthread_bind(task, cpu);
-		wake_up_process(task);
-	} else
+	task = kthread_run_on_cpu(bL_switcher_thread, arg,
+				  cpu, "kswitcher_%d");
+	if (IS_ERR(task))
 		pr_err("%s failed for CPU %d\n", __func__, cpu);
+
 	return task;
 }
 
-- 
2.46.0