linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Sean Anderson <sean.anderson@linux.dev>
To: Mark Brown <broonie@kernel.org>, linux-spi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	Michal Simek <michal.simek@amd.com>,
	linux-kernel@vger.kernel.org,
	Sean Anderson <sean.anderson@linux.dev>
Subject: [PATCH] spi: zynqmp-gqspi: Scale timeout by data size
Date: Fri,  9 Aug 2024 16:15:39 -0400	[thread overview]
Message-ID: <20240809201540.3363243-1-sean.anderson@linux.dev> (raw)

Large blocks of data time out when reading because we don't wait long
enough for the transfer to complete. Scale our timeouts based on the
amount of data we are tranferring, with a healthy dose of pessimism.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 drivers/spi/spi-zynqmp-gqspi.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 99524a3c9f38..558c466135a5 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -1033,6 +1033,18 @@ static int __maybe_unused zynqmp_runtime_resume(struct device *dev)
 	return 0;
 }
 
+static unsigned long zynqmp_qspi_timeout(struct zynqmp_qspi *xqspi, u8 bits,
+					 unsigned long bytes)
+{
+	unsigned long timeout;
+
+	/* Assume we are at most 2x slower than the nominal bus speed */
+	timeout = mult_frac(bytes, 2 * 8 * MSEC_PER_SEC,
+			    bits * xqspi->speed_hz);
+	/* And add 100 ms for scheduling delays */
+	return msecs_to_jiffies(timeout + 100);
+}
+
 /**
  * zynqmp_qspi_exec_op() - Initiates the QSPI transfer
  * @mem: The SPI memory
@@ -1049,6 +1061,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 {
 	struct zynqmp_qspi *xqspi = spi_controller_get_devdata
 				    (mem->spi->controller);
+	unsigned long timeout;
 	int err = 0, i;
 	u32 genfifoentry = 0;
 	u16 opcode = op->cmd.opcode;
@@ -1077,8 +1090,10 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 		zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
 				   GQSPI_IER_GENFIFOEMPTY_MASK |
 				   GQSPI_IER_TXNOT_FULL_MASK);
-		if (!wait_for_completion_timeout
-		    (&xqspi->data_completion, msecs_to_jiffies(1000))) {
+		timeout = zynqmp_qspi_timeout(xqspi, op->cmd.buswidth,
+					      op->cmd.nbytes);
+		if (!wait_for_completion_timeout(&xqspi->data_completion,
+						 timeout)) {
 			err = -ETIMEDOUT;
 			goto return_err;
 		}
@@ -1104,8 +1119,10 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 				   GQSPI_IER_TXEMPTY_MASK |
 				   GQSPI_IER_GENFIFOEMPTY_MASK |
 				   GQSPI_IER_TXNOT_FULL_MASK);
-		if (!wait_for_completion_timeout
-		    (&xqspi->data_completion, msecs_to_jiffies(1000))) {
+		timeout = zynqmp_qspi_timeout(xqspi, op->addr.buswidth,
+					      op->addr.nbytes);
+		if (!wait_for_completion_timeout(&xqspi->data_completion,
+						 timeout)) {
 			err = -ETIMEDOUT;
 			goto return_err;
 		}
@@ -1173,8 +1190,9 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 						   GQSPI_IER_RXEMPTY_MASK);
 			}
 		}
-		if (!wait_for_completion_timeout
-		    (&xqspi->data_completion, msecs_to_jiffies(1000)))
+		timeout = zynqmp_qspi_timeout(xqspi, op->data.buswidth,
+					      op->data.nbytes);
+		if (!wait_for_completion_timeout(&xqspi->data_completion, timeout))
 			err = -ETIMEDOUT;
 	}
 
-- 
2.35.1.1320.gc452695387.dirty



             reply	other threads:[~2024-08-09 20:16 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-09 20:15 Sean Anderson [this message]
2024-08-13 15:07 ` [PATCH] spi: zynqmp-gqspi: Scale timeout by data size Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240809201540.3363243-1-sean.anderson@linux.dev \
    --to=sean.anderson@linux.dev \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=michal.simek@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).