From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <linus.walleij@linaro.org>, <brgl@bgdev.pl>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <joel@jms.id.au>,
<andrew@codeconstruct.com.au>, <linux-gpio@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<BMC-SW@aspeedtech.com>
Subject: [PATCH v1 1/2] dt-bindings: gpio: aspeed,ast2400-gpio: Support ast2700
Date: Wed, 21 Aug 2024 15:07:39 +0800 [thread overview]
Message-ID: <20240821070740.2378602-2-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20240821070740.2378602-1-billy_tsai@aspeedtech.com>
The AST2700 is the 7th generation SoC from Aspeed, featuring two GPIO
controllers: one with 12 GPIO pins and another with 216 GPIO pins.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
.../bindings/gpio/aspeed,ast2400-gpio.yaml | 46 ++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
index cf11aa7ec8c7..4d439972c14b 100644
--- a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
@@ -15,6 +15,7 @@ properties:
- aspeed,ast2400-gpio
- aspeed,ast2500-gpio
- aspeed,ast2600-gpio
+ - aspeed,ast2700-gpio
reg:
maxItems: 1
@@ -42,7 +43,7 @@ properties:
const: 2
ngpios:
- minimum: 36
+ minimum: 12
maximum: 232
required:
@@ -93,6 +94,20 @@ allOf:
enum: [ 36, 208 ]
required:
- ngpios
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: aspeed,ast2700-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 12
+ maxItems: 216
+ ngpios:
+ enum: [ 12, 216 ]
+ required:
+ - ngpios
additionalProperties: false
@@ -146,3 +161,32 @@ examples:
gpio-ranges = <&pinctrl 0 208 36>;
ngpios = <36>;
};
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ gpio2: gpio@14c0b000 {
+ compatible = "aspeed,ast2700-gpio";
+ reg = <0x0 0x14c0b000 0x0 0x1000>;
+ interrupts-extended = <&soc1_intc2 18>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl1 0 0 216>;
+ ngpios = <216>;
+ };
+
+ gpio3: gpio@12c11000 {
+ compatible = "aspeed,ast2700-gpio";
+ reg = <0x0 0x12c11000 0x0 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl0 0 0 12>;
+ ngpios = <12>;
+ };
+ };
--
2.25.1
next prev parent reply other threads:[~2024-08-21 7:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-21 7:07 [PATCH v1 0/2] Add Aspeed G7 gpio support Billy Tsai
2024-08-21 7:07 ` Billy Tsai [this message]
2024-08-21 8:51 ` [PATCH v1 1/2] dt-bindings: gpio: aspeed,ast2400-gpio: Support ast2700 Krzysztof Kozlowski
2024-09-02 8:23 ` Billy Tsai
2024-08-21 7:07 ` [PATCH v1 2/2] gpio: Add G7 Aspeed gpio controller driver Billy Tsai
2024-08-21 12:10 ` Bartosz Golaszewski
2024-08-26 9:59 ` Billy Tsai
2024-08-21 20:51 ` kernel test robot
2024-08-21 23:13 ` kernel test robot
2024-08-22 1:31 ` Andrew Jeffery
2024-08-27 2:45 ` Billy Tsai
2024-08-28 1:18 ` Andrew Jeffery
2024-08-28 5:35 ` Billy Tsai
2024-08-22 9:16 ` kernel test robot
2024-08-26 8:37 ` Linus Walleij
2024-08-26 10:56 ` [PATCH " Markus Elfring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240821070740.2378602-2-billy_tsai@aspeedtech.com \
--to=billy_tsai@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=brgl@bgdev.pl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).