From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>,
"Jakub Kicinski" <kuba@kernel.org>,
"Eric Dumazet" <edumazet@google.com>,
"Paolo Abeni" <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>,
linux-arm-kernel@lists.infradead.org,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Jesse Brandeburg" <jesse.brandeburg@intel.com>,
"Marek Behún" <kabel@kernel.org>,
"Piergiorgio Beruto" <piergiorgio.beruto@gmail.com>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Nicolò Veronese" <nicveronese@gmail.com>,
"Simon Horman" <horms@kernel.org>,
mwojtas@chromium.org, "Nathan Chancellor" <nathan@kernel.org>,
"Antoine Tenart" <atenart@kernel.org>,
"Marc Kleine-Budde" <mkl@pengutronix.de>,
"Dan Carpenter" <dan.carpenter@linaro.org>,
"Romain Gantois" <romain.gantois@bootlin.com>
Subject: [PATCH net-next v18 12/13] net: ethtool: strset: Allow querying phy stats by index
Date: Wed, 21 Aug 2024 17:10:06 +0200 [thread overview]
Message-ID: <20240821151009.1681151-13-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20240821151009.1681151-1-maxime.chevallier@bootlin.com>
The ETH_SS_PHY_STATS command gets PHY statistics. Use the phydev pointer
from the ethnl request to allow query phy stats from each PHY on the
link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
net/ethtool/strset.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/net/ethtool/strset.c b/net/ethtool/strset.c
index 56b99606f00b..b3382b3cf325 100644
--- a/net/ethtool/strset.c
+++ b/net/ethtool/strset.c
@@ -126,7 +126,7 @@ struct strset_reply_data {
const struct nla_policy ethnl_strset_get_policy[] = {
[ETHTOOL_A_STRSET_HEADER] =
- NLA_POLICY_NESTED(ethnl_header_policy),
+ NLA_POLICY_NESTED(ethnl_header_policy_phy),
[ETHTOOL_A_STRSET_STRINGSETS] = { .type = NLA_NESTED },
[ETHTOOL_A_STRSET_COUNTS_ONLY] = { .type = NLA_FLAG },
};
@@ -233,17 +233,18 @@ static void strset_cleanup_data(struct ethnl_reply_data *reply_base)
}
static int strset_prepare_set(struct strset_info *info, struct net_device *dev,
- unsigned int id, bool counts_only)
+ struct phy_device *phydev, unsigned int id,
+ bool counts_only)
{
const struct ethtool_phy_ops *phy_ops = ethtool_phy_ops;
const struct ethtool_ops *ops = dev->ethtool_ops;
void *strings;
int count, ret;
- if (id == ETH_SS_PHY_STATS && dev->phydev &&
+ if (id == ETH_SS_PHY_STATS && phydev &&
!ops->get_ethtool_phy_stats && phy_ops &&
phy_ops->get_sset_count)
- ret = phy_ops->get_sset_count(dev->phydev);
+ ret = phy_ops->get_sset_count(phydev);
else if (ops->get_sset_count && ops->get_strings)
ret = ops->get_sset_count(dev, id);
else
@@ -258,10 +259,10 @@ static int strset_prepare_set(struct strset_info *info, struct net_device *dev,
strings = kcalloc(count, ETH_GSTRING_LEN, GFP_KERNEL);
if (!strings)
return -ENOMEM;
- if (id == ETH_SS_PHY_STATS && dev->phydev &&
+ if (id == ETH_SS_PHY_STATS && phydev &&
!ops->get_ethtool_phy_stats && phy_ops &&
phy_ops->get_strings)
- phy_ops->get_strings(dev->phydev, strings);
+ phy_ops->get_strings(phydev, strings);
else
ops->get_strings(dev, id, strings);
info->strings = strings;
@@ -279,6 +280,8 @@ static int strset_prepare_data(const struct ethnl_req_info *req_base,
const struct strset_req_info *req_info = STRSET_REQINFO(req_base);
struct strset_reply_data *data = STRSET_REPDATA(reply_base);
struct net_device *dev = reply_base->dev;
+ struct nlattr **tb = info->attrs;
+ struct phy_device *phydev;
unsigned int i;
int ret;
@@ -296,6 +299,13 @@ static int strset_prepare_data(const struct ethnl_req_info *req_base,
return 0;
}
+ phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_HEADER_FLAGS],
+ info->extack);
+
+ /* phydev can be NULL, check for errors only */
+ if (IS_ERR(phydev))
+ return PTR_ERR(phydev);
+
ret = ethnl_ops_begin(dev);
if (ret < 0)
goto err_strset;
@@ -304,7 +314,7 @@ static int strset_prepare_data(const struct ethnl_req_info *req_base,
!data->sets[i].per_dev)
continue;
- ret = strset_prepare_set(&data->sets[i], dev, i,
+ ret = strset_prepare_set(&data->sets[i], dev, phydev, i,
req_info->counts_only);
if (ret < 0)
goto err_ops;
--
2.45.2
next prev parent reply other threads:[~2024-08-21 15:19 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-21 15:09 [PATCH net-next v18 00/13] Introduce PHY listing and link_topology tracking Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 01/13] net: phy: Introduce ethernet link topology representation Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 03/13] net: phy: add helpers to handle sfp phy connect/disconnect Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 04/13] net: sfp: Add helper to return the SFP bus name Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 05/13] net: ethtool: Allow passing a phy index for some commands Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 06/13] netlink: specs: add phy-index as a header parameter Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 07/13] net: ethtool: Introduce a command to list PHYs on an interface Maxime Chevallier
2024-09-10 16:41 ` Eric Dumazet
2024-09-10 17:20 ` Maxime Chevallier
2024-09-10 17:23 ` Eric Dumazet
2024-08-21 15:10 ` [PATCH net-next v18 08/13] netlink: specs: add ethnl PHY_GET command set Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 09/13] net: ethtool: plca: Target the command to the requested PHY Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 10/13] net: ethtool: pse-pd: " Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 11/13] net: ethtool: cable-test: " Maxime Chevallier
2024-08-21 15:10 ` Maxime Chevallier [this message]
2024-08-21 15:10 ` [PATCH net-next v18 13/13] Documentation: networking: document phy_link_topology Maxime Chevallier
2024-08-23 12:10 ` [PATCH net-next v18 00/13] Introduce PHY listing and link_topology tracking patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240821151009.1681151-13-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=atenart@kernel.org \
--cc=christophe.leroy@csgroup.eu \
--cc=dan.carpenter@linaro.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=jesse.brandeburg@intel.com \
--cc=kabel@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mkl@pengutronix.de \
--cc=mwojtas@chromium.org \
--cc=nathan@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nicveronese@gmail.com \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=piergiorgio.beruto@gmail.com \
--cc=romain.gantois@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).