[PATCH net-next v3 1/5] net: xilinx: axienet: Always disable promiscuous mode

[Sean Anderson <sean.anderson@linux.dev>]

If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.

Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
---

(no changes since v1)

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 38f7b764fe66..6fad473a937b 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -451,6 +451,10 @@ static void axienet_set_multicast_list(struct net_device *ndev)
 	} else if (!netdev_mc_empty(ndev)) {
 		struct netdev_hw_addr *ha;
 
+		reg = axienet_ior(lp, XAE_FMI_OFFSET);
+		reg &= ~XAE_FMI_PM_MASK;
+		axienet_iow(lp, XAE_FMI_OFFSET, reg);
+
 		i = 0;
 		netdev_for_each_mc_addr(ha, ndev) {
 			if (i >= XAE_MULTICAST_CAM_TABLE_NUM)
-- 
2.35.1.1320.gc452695387.dirty