[PATCH v4 0/4] Do device node auto cleanup in drivers/soc/ti/

[PATCH v4 0/4] Do device node auto cleanup in drivers/soc/ti/

[Kousik Sanagavarapu]

Do "struct device_node" auto cleanup in soc/ti/.  This patch series takes
care of all the cases where this is possible.

Thanks Nishanth for the review on the previous round.

v3:

	https://lore.kernel.org/linux-arm-kernel/20240707055341.3656-1-five231003@gmail.com/

Changes since v3:
- s/seperate/separate in the commit msgs througout.
- 1 / 4 - "return ret" instead of "goto rpm_put" as pm_runtime was never
  enabled by the time we call pruss_of_setup_memories() in case we
  return on err.

v2:

	https://lore.kernel.org/linux-arm-kernel/20240703065710.13786-1-five231003@gmail.com/

Changes since v2:
- Split v2 1/3 into v3 1/4 and v3 2/4.  The memory setup code is
  seperated out of the pruss_probe() function and put into 1/4 and the
  actual conversion to auto cleanup is done in 2/4.
- Replace dev_err() with dev_err_probe() in the code paths touched.

v1:

	https://lore.kernel.org/linux-arm-kernel/20240510071432.62913-1-five231003@gmail.com/

Changes since v1:
- Refactor code so that it the scope of the pointers touched is reduced,
  making the code look more clean.
- The above also the side-effect of fixing the errors that clang emitted
  (but my local version of gcc didn't) for PATCH 2/3 during v1.
Kousik Sanagavarapu (4):
  soc: ti: pruss: factor out memories setup
  soc: ti: pruss: do device_node auto cleanup
  soc: ti: knav_qmss_queue: do device_node auto cleanup
  soc: ti: pm33xx: do device_node auto cleanup

 drivers/soc/ti/knav_qmss_queue.c | 100 +++++++++---------
 drivers/soc/ti/pm33xx.c          |  52 ++++-----
 drivers/soc/ti/pruss.c           | 176 ++++++++++++++-----------------
 3 files changed, 155 insertions(+), 173 deletions(-)

-- 
2.46.0.290.g4f02c709e8.dirty

[PATCH v4 1/4] soc: ti: pruss: factor out memories setup

[Kousik Sanagavarapu]

Factor out memories setup code from probe() into a new function
pruss_of_setup_memories().  This sets the stage for introducing auto
cleanup of the device node (done in the subsequent patch), since the
clean up depends on the scope of the pointer and factoring out
code into a separate function obviously limits the scope of the various
variables used in that function.

Apart from the above, this change also has the advantage of making the
code look more neat.

While at it, use dev_err_probe() instead of plain dev_err() as this new
function is called by the probe().

Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
---
 drivers/soc/ti/pruss.c | 111 ++++++++++++++++++++++-------------------
 1 file changed, 61 insertions(+), 50 deletions(-)

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 24a42e0b645c..83d7d8d5ef22 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -415,6 +415,63 @@ static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node)
 	return ret;
 }
 
+static int pruss_of_setup_memories(struct device *dev, struct pruss *pruss)
+{
+	struct device_node *np = dev_of_node(dev);
+	struct device_node *child;
+	const struct pruss_private_data *data = of_device_get_match_data(dev);
+	const char *mem_names[PRUSS_MEM_MAX] = { "dram0", "dram1", "shrdram2" };
+	int i;
+
+	child = of_get_child_by_name(np, "memories");
+	if (!child)
+		return dev_err_probe(dev, -ENODEV,
+				     "%pOF is missing its 'memories' node\n",
+				     child);
+
+	for (i = 0; i < PRUSS_MEM_MAX; i++) {
+		struct resource res;
+		int index;
+
+		/*
+		 * On AM437x one of two PRUSS units don't contain Shared RAM,
+		 * skip it
+		 */
+		if (data && data->has_no_sharedram && i == PRUSS_MEM_SHRD_RAM2)
+			continue;
+
+		index = of_property_match_string(child, "reg-names",
+						 mem_names[i]);
+		if (index < 0) {
+			of_node_put(child);
+			return index;
+		}
+
+		if (of_address_to_resource(child, index, &res)) {
+			of_node_put(child);
+			return -EINVAL;
+		}
+
+		pruss->mem_regions[i].va = devm_ioremap(dev, res.start,
+							resource_size(&res));
+		if (!pruss->mem_regions[i].va) {
+			of_node_put(child);
+			return dev_err_probe(dev, -ENOMEM,
+					     "failed to parse and map memory resource %d %s\n",
+					     i, mem_names[i]);
+		}
+		pruss->mem_regions[i].pa = res.start;
+		pruss->mem_regions[i].size = resource_size(&res);
+
+		dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n",
+			mem_names[i], &pruss->mem_regions[i].pa,
+			pruss->mem_regions[i].size, pruss->mem_regions[i].va);
+	}
+	of_node_put(child);
+
+	return 0;
+}
+
 static struct regmap_config regmap_conf = {
 	.reg_bits = 32,
 	.val_bits = 32,
@@ -471,15 +528,8 @@ static int pruss_cfg_of_init(struct device *dev, struct pruss *pruss)
 static int pruss_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev_of_node(dev);
-	struct device_node *child;
 	struct pruss *pruss;
-	struct resource res;
-	int ret, i, index;
-	const struct pruss_private_data *data;
-	const char *mem_names[PRUSS_MEM_MAX] = { "dram0", "dram1", "shrdram2" };
-
-	data = of_device_get_match_data(&pdev->dev);
+	int ret;
 
 	ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
 	if (ret) {
@@ -494,48 +544,9 @@ static int pruss_probe(struct platform_device *pdev)
 	pruss->dev = dev;
 	mutex_init(&pruss->lock);
 
-	child = of_get_child_by_name(np, "memories");
-	if (!child) {
-		dev_err(dev, "%pOF is missing its 'memories' node\n", child);
-		return -ENODEV;
-	}
-
-	for (i = 0; i < PRUSS_MEM_MAX; i++) {
-		/*
-		 * On AM437x one of two PRUSS units don't contain Shared RAM,
-		 * skip it
-		 */
-		if (data && data->has_no_sharedram && i == PRUSS_MEM_SHRD_RAM2)
-			continue;
-
-		index = of_property_match_string(child, "reg-names",
-						 mem_names[i]);
-		if (index < 0) {
-			of_node_put(child);
-			return index;
-		}
-
-		if (of_address_to_resource(child, index, &res)) {
-			of_node_put(child);
-			return -EINVAL;
-		}
-
-		pruss->mem_regions[i].va = devm_ioremap(dev, res.start,
-							resource_size(&res));
-		if (!pruss->mem_regions[i].va) {
-			dev_err(dev, "failed to parse and map memory resource %d %s\n",
-				i, mem_names[i]);
-			of_node_put(child);
-			return -ENOMEM;
-		}
-		pruss->mem_regions[i].pa = res.start;
-		pruss->mem_regions[i].size = resource_size(&res);
-
-		dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n",
-			mem_names[i], &pruss->mem_regions[i].pa,
-			pruss->mem_regions[i].size, pruss->mem_regions[i].va);
-	}
-	of_node_put(child);
+	ret = pruss_of_setup_memories(dev, pruss);
+	if (ret < 0)
+		return ret;
 
 	platform_set_drvdata(pdev, pruss);
 
-- 
2.46.0.290.g4f02c709e8.dirty

[PATCH v4 2/4] soc: ti: pruss: do device_node auto cleanup

[Kousik Sanagavarapu]

Use scope based cleanup instead of manual of_node_put() calls, hence
simplifying the handling of error paths at various places.

While at it, use dev_err_probe() instead of dev_err() in all the code
paths touched.

Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
---
 drivers/soc/ti/pruss.c | 91 +++++++++++++++---------------------------
 1 file changed, 33 insertions(+), 58 deletions(-)

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 83d7d8d5ef22..3ec758f50e24 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -380,50 +380,42 @@ static int pruss_clk_mux_setup(struct pruss *pruss, struct clk *clk_mux,
 
 static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node)
 {
-	const struct pruss_private_data *data;
-	struct device_node *clks_np;
 	struct device *dev = pruss->dev;
-	int ret = 0;
-
-	data = of_device_get_match_data(dev);
+	struct device_node *clks_np __free(device_node) =
+			of_get_child_by_name(cfg_node, "clocks");
+	const struct pruss_private_data *data = of_device_get_match_data(dev);
+	int ret;
 
-	clks_np = of_get_child_by_name(cfg_node, "clocks");
-	if (!clks_np) {
-		dev_err(dev, "%pOF is missing its 'clocks' node\n", cfg_node);
-		return -ENODEV;
-	}
+	if (!clks_np)
+		return dev_err_probe(dev, -ENODEV,
+				     "%pOF is missing its 'clocks' node\n",
+				     cfg_node);
 
 	if (data && data->has_core_mux_clock) {
 		ret = pruss_clk_mux_setup(pruss, pruss->core_clk_mux,
 					  "coreclk-mux", clks_np);
-		if (ret) {
-			dev_err(dev, "failed to setup coreclk-mux\n");
-			goto put_clks_node;
-		}
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "failed to setup coreclk-mux\n");
 	}
 
 	ret = pruss_clk_mux_setup(pruss, pruss->iep_clk_mux, "iepclk-mux",
 				  clks_np);
-	if (ret) {
-		dev_err(dev, "failed to setup iepclk-mux\n");
-		goto put_clks_node;
-	}
-
-put_clks_node:
-	of_node_put(clks_np);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to setup iepclk-mux\n");
 
-	return ret;
+	return 0;
 }
 
 static int pruss_of_setup_memories(struct device *dev, struct pruss *pruss)
 {
 	struct device_node *np = dev_of_node(dev);
-	struct device_node *child;
+	struct device_node *child __free(device_node) =
+			of_get_child_by_name(np, "memories");
 	const struct pruss_private_data *data = of_device_get_match_data(dev);
 	const char *mem_names[PRUSS_MEM_MAX] = { "dram0", "dram1", "shrdram2" };
 	int i;
 
-	child = of_get_child_by_name(np, "memories");
 	if (!child)
 		return dev_err_probe(dev, -ENODEV,
 				     "%pOF is missing its 'memories' node\n",
@@ -442,24 +434,18 @@ static int pruss_of_setup_memories(struct device *dev, struct pruss *pruss)
 
 		index = of_property_match_string(child, "reg-names",
 						 mem_names[i]);
-		if (index < 0) {
-			of_node_put(child);
+		if (index < 0)
 			return index;
-		}
 
-		if (of_address_to_resource(child, index, &res)) {
-			of_node_put(child);
+		if (of_address_to_resource(child, index, &res))
 			return -EINVAL;
-		}
 
 		pruss->mem_regions[i].va = devm_ioremap(dev, res.start,
 							resource_size(&res));
-		if (!pruss->mem_regions[i].va) {
-			of_node_put(child);
+		if (!pruss->mem_regions[i].va)
 			return dev_err_probe(dev, -ENOMEM,
 					     "failed to parse and map memory resource %d %s\n",
 					     i, mem_names[i]);
-		}
 		pruss->mem_regions[i].pa = res.start;
 		pruss->mem_regions[i].size = resource_size(&res);
 
@@ -467,7 +453,6 @@ static int pruss_of_setup_memories(struct device *dev, struct pruss *pruss)
 			mem_names[i], &pruss->mem_regions[i].pa,
 			pruss->mem_regions[i].size, pruss->mem_regions[i].va);
 	}
-	of_node_put(child);
 
 	return 0;
 }
@@ -481,26 +466,21 @@ static struct regmap_config regmap_conf = {
 static int pruss_cfg_of_init(struct device *dev, struct pruss *pruss)
 {
 	struct device_node *np = dev_of_node(dev);
-	struct device_node *child;
+	struct device_node *child __free(device_node) =
+			of_get_child_by_name(np, "cfg");
 	struct resource res;
 	int ret;
 
-	child = of_get_child_by_name(np, "cfg");
-	if (!child) {
-		dev_err(dev, "%pOF is missing its 'cfg' node\n", child);
-		return -ENODEV;
-	}
+	if (!child)
+		return dev_err_probe(dev, -ENODEV,
+				     "%pOF is missing its 'cfg' node\n", child);
 
-	if (of_address_to_resource(child, 0, &res)) {
-		ret = -ENOMEM;
-		goto node_put;
-	}
+	if (of_address_to_resource(child, 0, &res))
+		return -ENOMEM;
 
 	pruss->cfg_base = devm_ioremap(dev, res.start, resource_size(&res));
-	if (!pruss->cfg_base) {
-		ret = -ENOMEM;
-		goto node_put;
-	}
+	if (!pruss->cfg_base)
+		return -ENOMEM;
 
 	regmap_conf.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", child,
 				     (u64)res.start);
@@ -509,20 +489,15 @@ static int pruss_cfg_of_init(struct device *dev, struct pruss *pruss)
 	pruss->cfg_regmap = devm_regmap_init_mmio(dev, pruss->cfg_base,
 						  &regmap_conf);
 	kfree(regmap_conf.name);
-	if (IS_ERR(pruss->cfg_regmap)) {
-		dev_err(dev, "regmap_init_mmio failed for cfg, ret = %ld\n",
-			PTR_ERR(pruss->cfg_regmap));
-		ret = PTR_ERR(pruss->cfg_regmap);
-		goto node_put;
-	}
+	if (IS_ERR(pruss->cfg_regmap))
+		return dev_err_probe(dev, PTR_ERR(pruss->cfg_regmap),
+				     "regmap_init_mmio failed for cfg\n");
 
 	ret = pruss_clk_init(pruss, child);
 	if (ret)
-		dev_err(dev, "pruss_clk_init failed, ret = %d\n", ret);
+		return dev_err_probe(dev, ret, "pruss_clk_init failed\n");
 
-node_put:
-	of_node_put(child);
-	return ret;
+	return 0;
 }
 
 static int pruss_probe(struct platform_device *pdev)
-- 
2.46.0.290.g4f02c709e8.dirty

[PATCH v4 3/4] soc: ti: knav_qmss_queue: do device_node auto cleanup

[Kousik Sanagavarapu]

Use scope based cleanup, instead of manual of_node_put() calls, which
automatically free()s "struct device_node".

While at it, refactor the code from knav_queue_probe() into the separate
functions to make auto cleanup look more neat.

Doing the cleanup this way has the advantage of reducing the chance of
memory leaks in case we need to read from new OF nodes in the future
when we probe.

Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
---
 drivers/soc/ti/knav_qmss_queue.c | 100 ++++++++++++++++---------------
 1 file changed, 53 insertions(+), 47 deletions(-)

diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index f2055a76f84c..2f14841ac8a9 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -1076,14 +1076,20 @@ static const char *knav_queue_find_name(struct device_node *node)
 }
 
 static int knav_queue_setup_regions(struct knav_device *kdev,
-					struct device_node *regions)
+				    struct device_node *node)
 {
 	struct device *dev = kdev->dev;
+	struct device_node *regions __free(device_node) =
+			of_get_child_by_name(node, "descriptor-regions");
 	struct knav_region *region;
 	struct device_node *child;
 	u32 temp[2];
 	int ret;
 
+	if (!regions)
+		return dev_err_probe(dev, -ENODEV,
+				     "descriptor-regions not specified\n");
+
 	for_each_child_of_node(regions, child) {
 		region = devm_kzalloc(dev, sizeof(*region), GFP_KERNEL);
 		if (!region) {
@@ -1121,10 +1127,9 @@ static int knav_queue_setup_regions(struct knav_device *kdev,
 		INIT_LIST_HEAD(&region->pools);
 		list_add_tail(&region->list, &kdev->regions);
 	}
-	if (list_empty(&kdev->regions)) {
-		dev_err(dev, "no valid region information found\n");
-		return -ENODEV;
-	}
+	if (list_empty(&kdev->regions))
+		return dev_err_probe(dev, -ENODEV,
+				     "no valid region information found\n");
 
 	/* Next, we run through the regions and set things up */
 	for_each_region(kdev, region)
@@ -1306,10 +1311,16 @@ static int knav_setup_queue_range(struct knav_device *kdev,
 }
 
 static int knav_setup_queue_pools(struct knav_device *kdev,
-				   struct device_node *queue_pools)
+				  struct device_node *node)
 {
+	struct device_node *queue_pools __free(device_node) =
+			of_get_child_by_name(node, "queue-pools");
 	struct device_node *type, *range;
 
+	if (!queue_pools)
+		return dev_err_probe(kdev->dev, -ENODEV,
+				     "queue-pools not specified\n");
+
 	for_each_child_of_node(queue_pools, type) {
 		for_each_child_of_node(type, range) {
 			/* return value ignored, we init the rest... */
@@ -1318,10 +1329,9 @@ static int knav_setup_queue_pools(struct knav_device *kdev,
 	}
 
 	/* ... and barf if they all failed! */
-	if (list_empty(&kdev->queue_ranges)) {
-		dev_err(kdev->dev, "no valid queue range found\n");
-		return -ENODEV;
-	}
+	if (list_empty(&kdev->queue_ranges))
+		return dev_err_probe(kdev->dev, -ENODEV,
+				     "no valid queue range found\n");
 	return 0;
 }
 
@@ -1389,14 +1399,20 @@ static void __iomem *knav_queue_map_reg(struct knav_device *kdev,
 }
 
 static int knav_queue_init_qmgrs(struct knav_device *kdev,
-					struct device_node *qmgrs)
+				 struct device_node *node)
 {
 	struct device *dev = kdev->dev;
+	struct device_node *qmgrs __free(device_node) =
+			of_get_child_by_name(node, "qmgrs");
 	struct knav_qmgr_info *qmgr;
 	struct device_node *child;
 	u32 temp[2];
 	int ret;
 
+	if (!qmgrs)
+		return dev_err_probe(dev, -ENODEV,
+				     "queue manager info not specified\n");
+
 	for_each_child_of_node(qmgrs, child) {
 		qmgr = devm_kzalloc(dev, sizeof(*qmgr), GFP_KERNEL);
 		if (!qmgr) {
@@ -1668,6 +1684,26 @@ static int knav_queue_start_pdsps(struct knav_device *kdev)
 	return 0;
 }
 
+static int knav_queue_setup_pdsps(struct knav_device *kdev,
+				  struct device_node *node)
+{
+	struct device_node *pdsps __free(device_node) =
+			of_get_child_by_name(node, "pdsps");
+
+	if (pdsps) {
+		int ret;
+
+		ret = knav_queue_init_pdsps(kdev, pdsps);
+		if (ret)
+			return ret;
+
+		ret = knav_queue_start_pdsps(kdev);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
 static inline struct knav_qmgr_info *knav_find_qmgr(unsigned id)
 {
 	struct knav_qmgr_info *qmgr;
@@ -1755,7 +1791,6 @@ MODULE_DEVICE_TABLE(of, keystone_qmss_of_match);
 static int knav_queue_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
-	struct device_node *qmgrs, *queue_pools, *regions, *pdsps;
 	struct device *dev = &pdev->dev;
 	u32 temp[2];
 	int ret;
@@ -1799,39 +1834,17 @@ static int knav_queue_probe(struct platform_device *pdev)
 	kdev->num_queues = temp[1];
 
 	/* Initialize queue managers using device tree configuration */
-	qmgrs =  of_get_child_by_name(node, "qmgrs");
-	if (!qmgrs) {
-		dev_err(dev, "queue manager info not specified\n");
-		ret = -ENODEV;
-		goto err;
-	}
-	ret = knav_queue_init_qmgrs(kdev, qmgrs);
-	of_node_put(qmgrs);
+	ret = knav_queue_init_qmgrs(kdev, node);
 	if (ret)
 		goto err;
 
 	/* get pdsp configuration values from device tree */
-	pdsps =  of_get_child_by_name(node, "pdsps");
-	if (pdsps) {
-		ret = knav_queue_init_pdsps(kdev, pdsps);
-		if (ret)
-			goto err;
-
-		ret = knav_queue_start_pdsps(kdev);
-		if (ret)
-			goto err;
-	}
-	of_node_put(pdsps);
+	ret = knav_queue_setup_pdsps(kdev, node);
+	if (ret)
+		goto err;
 
 	/* get usable queue range values from device tree */
-	queue_pools = of_get_child_by_name(node, "queue-pools");
-	if (!queue_pools) {
-		dev_err(dev, "queue-pools not specified\n");
-		ret = -ENODEV;
-		goto err;
-	}
-	ret = knav_setup_queue_pools(kdev, queue_pools);
-	of_node_put(queue_pools);
+	ret = knav_setup_queue_pools(kdev, node);
 	if (ret)
 		goto err;
 
@@ -1853,14 +1866,7 @@ static int knav_queue_probe(struct platform_device *pdev)
 	if (ret)
 		goto err;
 
-	regions = of_get_child_by_name(node, "descriptor-regions");
-	if (!regions) {
-		dev_err(dev, "descriptor-regions not specified\n");
-		ret = -ENODEV;
-		goto err;
-	}
-	ret = knav_queue_setup_regions(kdev, regions);
-	of_node_put(regions);
+	ret = knav_queue_setup_regions(kdev, node);
 	if (ret)
 		goto err;
 
-- 
2.46.0.290.g4f02c709e8.dirty

[PATCH v4 4/4] soc: ti: pm33xx: do device_node auto cleanup

[Kousik Sanagavarapu]

Use scope based cleanup instead of manual of_node_put() calls, hence
simplifying the handling of error paths.

Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
---
 drivers/soc/ti/pm33xx.c | 52 +++++++++++++++++------------------------
 1 file changed, 21 insertions(+), 31 deletions(-)

diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
index 3a56bbf3268a..8169885ab1e0 100644
--- a/drivers/soc/ti/pm33xx.c
+++ b/drivers/soc/ti/pm33xx.c
@@ -383,54 +383,44 @@ static void am33xx_pm_free_sram(void)
  */
 static int am33xx_pm_alloc_sram(void)
 {
-	struct device_node *np;
-	int ret = 0;
+	struct device_node *np __free(device_node) =
+			of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
 
-	np = of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
 	if (!np) {
 		np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
-		if (!np) {
-			dev_err(pm33xx_dev, "PM: %s: Unable to find device node for mpu\n",
-				__func__);
-			return -ENODEV;
-		}
+		if (!np)
+			return dev_err_probe(pm33xx_dev, -ENODEV,
+					     "PM: %s: Unable to find device node for mpu\n",
+					     __func__);
 	}
 
 	sram_pool = of_gen_pool_get(np, "pm-sram", 0);
-	if (!sram_pool) {
-		dev_err(pm33xx_dev, "PM: %s: Unable to get sram pool for ocmcram\n",
-			__func__);
-		ret = -ENODEV;
-		goto mpu_put_node;
-	}
+	if (!sram_pool)
+		return dev_err_probe(pm33xx_dev, -ENODEV,
+				     "PM: %s: Unable to get sram pool for ocmcram\n",
+				     __func__);
 
 	sram_pool_data = of_gen_pool_get(np, "pm-sram", 1);
-	if (!sram_pool_data) {
-		dev_err(pm33xx_dev, "PM: %s: Unable to get sram data pool for ocmcram\n",
-			__func__);
-		ret = -ENODEV;
-		goto mpu_put_node;
-	}
+	if (!sram_pool_data)
+		return dev_err_probe(pm33xx_dev, -ENODEV,
+				     "PM: %s: Unable to get sram data pool for ocmcram\n",
+				     __func__);
 
 	ocmcram_location = gen_pool_alloc(sram_pool, *pm_sram->do_wfi_sz);
-	if (!ocmcram_location) {
-		dev_err(pm33xx_dev, "PM: %s: Unable to allocate memory from ocmcram\n",
-			__func__);
-		ret = -ENOMEM;
-		goto mpu_put_node;
-	}
+	if (!ocmcram_location)
+		return dev_err_probe(pm33xx_dev, -ENOMEM,
+				     "PM: %s: Unable to allocate memory from ocmcram\n",
+				     __func__);
 
 	ocmcram_location_data = gen_pool_alloc(sram_pool_data,
 					       sizeof(struct emif_regs_amx3));
 	if (!ocmcram_location_data) {
-		dev_err(pm33xx_dev, "PM: Unable to allocate memory from ocmcram\n");
 		gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
-		ret = -ENOMEM;
+		return dev_err_probe(pm33xx_dev, -ENOMEM,
+				     "PM: Unable to allocate memory from ocmcram\n");
 	}
 
-mpu_put_node:
-	of_node_put(np);
-	return ret;
+	return 0;
 }
 
 static int am33xx_pm_rtc_setup(void)
-- 
2.46.0.290.g4f02c709e8.dirty

Re: [PATCH v4 0/4] Do device node auto cleanup in drivers/soc/ti/

[Nishanth Menon]

Hi Kousik Sanagavarapu,

On Sun, 25 Aug 2024 14:18:41 +0530, Kousik Sanagavarapu wrote:
> Do "struct device_node" auto cleanup in soc/ti/.  This patch series takes
> care of all the cases where this is possible.
> 
> Thanks Nishanth for the review on the previous round.
> 
> v3:
> 
> [...]

I have applied the following to branch ti-drivers-soc-next on [1].
Thank you!

[1/4] soc: ti: pruss: factor out memories setup
      commit: 952ceb03787dde88fc713c7453824e25bf12cb3a
[2/4] soc: ti: pruss: do device_node auto cleanup
      commit: df70c0b4828bb85f1370453288a0a63d7618decf
[3/4] soc: ti: knav_qmss_queue: do device_node auto cleanup
      commit: b0289dbf1c952c04ba48b05cc6345381999ef055
[4/4] soc: ti: pm33xx: do device_node auto cleanup
      commit: 68123510b7c1c610387dd306f92ff539c3c546b5

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D