linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Beleswar Padhi <b-padhi@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
	<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <u-kumar1@ti.com>, <j-choudhary@ti.com>, <vaishnav.a@ti.com>,
	<afd@ti.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v4 2/2] arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication
Date: Thu, 29 Aug 2024 11:39:32 +0530	[thread overview]
Message-ID: <20240829060932.3441295-3-b-padhi@ti.com> (raw)
In-Reply-To: <20240829060932.3441295-1-b-padhi@ti.com>

From: Apurva Nandan <a-nandan@ti.com>

The K3 J722S-EVM platform is based on the J722S SoC which has one
single-core Arm Cortex-R5F processor in each of the WAKEUP, MCU and MAIN
voltage domain, and two C71x DSP subsystems in MAIN voltage domain.

The Inter-Processor communication between the A72 cores and these R5F
and DSP remote cores is achieved through shared memory and Mailboxes.
Thus, add the memory carveouts and enable the mailbox clusters required
for communication.

Also, The remoteproc firmware like of R5F and DSPs in the MAIN voltage
domain use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash during booting of remotecores. Usage is
described as below:

	+===================+=============+
	|  Remoteproc Node  | Timer Node  |
	+===================+=============+
	| main_r5fss0_core0 | main_timer0 |
	+-------------------+-------------+
	| c7x_0             | main_timer1 |
	+-------------------+-------------+
	| c7x_1             | main_timer2 |
	+-------------------+-------------+

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
[ Enabled mailbox instances and Reserved timer nodes ]
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
---
v4: Changelog:
1) Moved "status" property to the end in all the extended DT nodes added
in this patch.
2) Preceded child-nodes by a single blank line in the extended DT nodes
added in this patch.

Link to v3:
https://lore.kernel.org/all/20240828112713.2668526-3-b-padhi@ti.com/

v3: Changelog:
1) Reserved conflicting timer nodes with remoteproc firmware (reflected the same
in commit message).
2) Simplified $subject to clarify that this patch enables IPC and transferred
the details into commit message.

Link to v2:
https://lore.kernel.org/all/20240612112259.1131653-3-b-padhi@ti.com/

v2: Changelog:
1) Squashed Patch 2 and 3 from V1 into Patch 2 in V2 as they were doing
the same logical thing.

Links to v1:
https://lore.kernel.org/all/20240607090433.488454-3-b-padhi@ti.com/
https://lore.kernel.org/all/20240607090433.488454-4-b-padhi@ti.com/


 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 157 ++++++++++++++++++++++++
 1 file changed, 157 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index dd3b5f7039d7..38620c76c3be 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -51,12 +51,71 @@ secure_ddr: optee@9e800000 {
 			no-map;
 		};
 
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
 		wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
 
+		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_0_memory_region: c7x-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_1_memory_region: c7x-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a5000000 {
+			reg = <0x00 0xa5000000 0x00 0x1c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
 	};
 
 	vmain_pd: regulator-0 {
@@ -494,6 +553,104 @@ &sdhci1 {
 	bootph-all;
 };
 
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+
+	mbox_main_r5_0: mbox-main-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c7x_1: mbox-c7x-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0 {
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&c7x_0 {
+	mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
+
+&c7x_1 {
+	mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
+	memory-region = <&c7x_1_dma_memory_region>,
+			<&c7x_1_memory_region>;
+	status = "okay";
+};
+
 &serdes_ln_ctrl {
 	idle-states = <J722S_SERDES0_LANE0_USB>,
 		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;
-- 
2.34.1



  parent reply	other threads:[~2024-08-29  6:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-29  6:09 [PATCH v4 0/2] Add Remoteproc Support for TI's J722S SoCs Beleswar Padhi
2024-08-29  6:09 ` [PATCH v4 1/2] arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes Beleswar Padhi
2024-08-30 15:10   ` Kumar, Udit
2024-08-30 15:21   ` Andrew Davis
2024-08-29  6:09 ` Beleswar Padhi [this message]
2024-08-30 13:57   ` [PATCH v4 2/2] arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication Kumar, Udit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240829060932.3441295-3-b-padhi@ti.com \
    --to=b-padhi@ti.com \
    --cc=afd@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=j-choudhary@ti.com \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=u-kumar1@ti.com \
    --cc=vaishnav.a@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).