From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Thippeswamy Havalige <thippesw@amd.com>
Cc: bhelgaas@google.com, lpieralisi@kernel.org, kw@linux.com,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, michal.simek@amd.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 2/2] PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver
Date: Fri, 30 Aug 2024 22:03:41 +0530 [thread overview]
Message-ID: <20240830163341.437jztschfrstrrj@thinkpad> (raw)
In-Reply-To: <20240811022345.1178203-3-thippesw@amd.com>
On Sun, Aug 11, 2024 at 07:53:45AM +0530, Thippeswamy Havalige wrote:
> Add support for Xilinx QDMA Soft IP core as Root Port.
>
> The Versal Prime devices support QDMA soft IP module in programmable logic.
>
> The integrated QDMA Soft IP block has integrated bridge function that can
> act as PCIe Root Port.
>
> Signed-off-by: Thippeswamy Havalige <thippesw@amd.com>
One comment below. With that addressed,
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> drivers/pci/controller/pcie-xilinx-dma-pl.c | 54 ++++++++++++++++++++-
> 1 file changed, 53 insertions(+), 1 deletion(-)
> ---
> changes in v4:
> - none
>
> changes in v3:
> - Modify macro value to lower case.
> - Change return type based QDMA compatible.
>
> changes in v2:
> - Add description for struct pl_dma_pcie
> ---
> diff --git a/drivers/pci/controller/pcie-xilinx-dma-pl.c b/drivers/pci/controller/pcie-xilinx-dma-pl.c
> index 5be5dfd8398f..1ea6a1d265bb 100644
> --- a/drivers/pci/controller/pcie-xilinx-dma-pl.c
> +++ b/drivers/pci/controller/pcie-xilinx-dma-pl.c
> @@ -13,6 +13,7 @@
> #include <linux/msi.h>
> #include <linux/of_address.h>
> #include <linux/of_pci.h>
> +#include <linux/of_platform.h>
Looks like this header is not used.
- Mani
>
> #include "../pci.h"
> #include "pcie-xilinx-common.h"
> @@ -71,10 +72,24 @@
>
> /* Phy Status/Control Register definitions */
> #define XILINX_PCIE_DMA_REG_PSCR_LNKUP BIT(11)
> +#define QDMA_BRIDGE_BASE_OFF 0xcd8
>
> /* Number of MSI IRQs */
> #define XILINX_NUM_MSI_IRQS 64
>
> +enum xilinx_pl_dma_version {
> + XDMA,
> + QDMA,
> +};
> +
> +/**
> + * struct xilinx_pl_dma_variant - PL DMA PCIe variant information
> + * @version: DMA version
> + */
> +struct xilinx_pl_dma_variant {
> + enum xilinx_pl_dma_version version;
> +};
> +
> struct xilinx_msi {
> struct irq_domain *msi_domain;
> unsigned long *bitmap;
> @@ -88,6 +103,7 @@ struct xilinx_msi {
> * struct pl_dma_pcie - PCIe port information
> * @dev: Device pointer
> * @reg_base: IO Mapped Register Base
> + * @cfg_base: IO Mapped Configuration Base
> * @irq: Interrupt number
> * @cfg: Holds mappings of config space window
> * @phys_reg_base: Physical address of reg base
> @@ -97,10 +113,12 @@ struct xilinx_msi {
> * @msi: MSI information
> * @intx_irq: INTx error interrupt number
> * @lock: Lock protecting shared register access
> + * @variant: PL DMA PCIe version check pointer
> */
> struct pl_dma_pcie {
> struct device *dev;
> void __iomem *reg_base;
> + void __iomem *cfg_base;
> int irq;
> struct pci_config_window *cfg;
> phys_addr_t phys_reg_base;
> @@ -110,16 +128,23 @@ struct pl_dma_pcie {
> struct xilinx_msi msi;
> int intx_irq;
> raw_spinlock_t lock;
> + const struct xilinx_pl_dma_variant *variant;
> };
>
> static inline u32 pcie_read(struct pl_dma_pcie *port, u32 reg)
> {
> + if (port->variant->version == QDMA)
> + return readl(port->reg_base + reg + QDMA_BRIDGE_BASE_OFF);
> +
> return readl(port->reg_base + reg);
> }
>
> static inline void pcie_write(struct pl_dma_pcie *port, u32 val, u32 reg)
> {
> - writel(val, port->reg_base + reg);
> + if (port->variant->version == QDMA)
> + writel(val, port->reg_base + reg + QDMA_BRIDGE_BASE_OFF);
> + else
> + writel(val, port->reg_base + reg);
> }
>
> static inline bool xilinx_pl_dma_pcie_link_up(struct pl_dma_pcie *port)
> @@ -173,6 +198,9 @@ static void __iomem *xilinx_pl_dma_pcie_map_bus(struct pci_bus *bus,
> if (!xilinx_pl_dma_pcie_valid_device(bus, devfn))
> return NULL;
>
> + if (port->variant->version == QDMA)
> + return port->cfg_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
> +
> return port->reg_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
> }
>
> @@ -731,6 +759,15 @@ static int xilinx_pl_dma_pcie_parse_dt(struct pl_dma_pcie *port,
>
> port->reg_base = port->cfg->win;
>
> + if (port->variant->version == QDMA) {
> + port->cfg_base = port->cfg->win;
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "breg");
> + port->reg_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(port->reg_base))
> + return PTR_ERR(port->reg_base);
> + port->phys_reg_base = res->start;
> + }
> +
> err = xilinx_request_msi_irq(port);
> if (err) {
> pci_ecam_free(port->cfg);
> @@ -760,6 +797,8 @@ static int xilinx_pl_dma_pcie_probe(struct platform_device *pdev)
> if (!bus)
> return -ENODEV;
>
> + port->variant = of_device_get_match_data(dev);
> +
> err = xilinx_pl_dma_pcie_parse_dt(port, bus->res);
> if (err) {
> dev_err(dev, "Parsing DT failed\n");
> @@ -791,9 +830,22 @@ static int xilinx_pl_dma_pcie_probe(struct platform_device *pdev)
> return err;
> }
>
> +static const struct xilinx_pl_dma_variant xdma_host = {
> + .version = XDMA,
> +};
> +
> +static const struct xilinx_pl_dma_variant qdma_host = {
> + .version = QDMA,
> +};
> +
> static const struct of_device_id xilinx_pl_dma_pcie_of_match[] = {
> {
> .compatible = "xlnx,xdma-host-3.00",
> + .data = &xdma_host,
> + },
> + {
> + .compatible = "xlnx,qdma-host-3.00",
> + .data = &qdma_host,
> },
> {}
> };
> --
> 2.34.1
>
>
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2024-08-30 16:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-11 2:23 [PATCH v4 0/2] Add support for Xilinx XDMA Soft IP as Root Port Thippeswamy Havalige
2024-08-11 2:23 ` [PATCH v4 1/2] dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx QDMA PCIe Root Port Bridge Thippeswamy Havalige
2024-08-11 2:23 ` [PATCH v4 2/2] PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver Thippeswamy Havalige
2024-08-21 5:34 ` Havalige, Thippeswamy
2024-08-30 16:33 ` Manivannan Sadhasivam [this message]
2024-09-01 16:46 ` Krzysztof Wilczyński
2024-09-01 16:45 ` [PATCH v4 0/2] Add support for Xilinx XDMA Soft IP as Root Port Krzysztof Wilczyński
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240830163341.437jztschfrstrrj@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=michal.simek@amd.com \
--cc=robh@kernel.org \
--cc=thippesw@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox