[PATCH 2/3] ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2

[Marek Vasut <marex@denx.de>]

Switch the bitclock-master and frame-master properties from phandle to
flag on STM32MP15xx DHCOM PDK2. There is no real reason to use phandle
in this system DT, since the phandle points to the endpoint node which
contains the property itself. Simplify the DT. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
---
 arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 22a2a204433b5..ea933da64903c 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -191,15 +191,15 @@ sgtl5000_port: port {
 
 			sgtl5000_tx_endpoint: endpoint@0 {
 				reg = <0>;
-				bitclock-master = <&sgtl5000_tx_endpoint>;
-				frame-master = <&sgtl5000_tx_endpoint>;
+				bitclock-master;
+				frame-master;
 				remote-endpoint = <&sai2a_endpoint>;
 			};
 
 			sgtl5000_rx_endpoint: endpoint@1 {
 				reg = <1>;
-				bitclock-master = <&sgtl5000_rx_endpoint>;
-				frame-master = <&sgtl5000_rx_endpoint>;
+				bitclock-master;
+				frame-master;
 				remote-endpoint = <&sai2b_endpoint>;
 			};
 		};
-- 
2.45.2