[PATCH 3/3] ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2

[Marek Vasut <marex@denx.de>]

By default the SGTL5000 derives bit and frame clock from MCLK, which
does not produce particularly accurate results. The SGTL5000 PLL does
improve the accuracy, but also increases power consumption. Using the
SoC SAI interface as bit and frame clock source results in the best
accuracy without the power consumption increase downside. Switch the
bit and frame clock direction from SAI to SGTL5000, reduce mclk-fs to
match.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
---
 arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index ea933da64903c..171d7c7658fa8 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -191,15 +191,11 @@ sgtl5000_port: port {
 
 			sgtl5000_tx_endpoint: endpoint@0 {
 				reg = <0>;
-				bitclock-master;
-				frame-master;
 				remote-endpoint = <&sai2a_endpoint>;
 			};
 
 			sgtl5000_rx_endpoint: endpoint@1 {
 				reg = <1>;
-				bitclock-master;
-				frame-master;
 				remote-endpoint = <&sai2b_endpoint>;
 			};
 		};
@@ -245,10 +241,12 @@ sai2a: audio-controller@4400b004 {
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_tx_endpoint>;
+				bitclock-master;
 				dai-format = "i2s";
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
-				mclk-fs = <512>;
+				frame-master;
+				mclk-fs = <256>;
 			};
 		};
 	};
@@ -263,10 +261,12 @@ sai2b: audio-controller@4400b024 {
 		sai2b_port: port {
 			sai2b_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_rx_endpoint>;
+				bitclock-master;
 				dai-format = "i2s";
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
-				mclk-fs = <512>;
+				frame-master;
+				mclk-fs = <256>;
 			};
 		};
 	};
-- 
2.45.2