From: jitendra.vegiraju@broadcom.com
To: netdev@vger.kernel.org
Cc: alexandre.torgue@foss.st.com, joabreu@synopsys.com,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, mcoquelin.stm32@gmail.com,
jitendra.vegiraju@broadcom.com,
bcm-kernel-feedback-list@broadcom.com, richardcochran@gmail.com,
ast@kernel.org, daniel@iogearbox.net, hawk@kernel.org,
john.fastabend@gmail.com, fancer.lancer@gmail.com,
rmk+kernel@armlinux.org.uk, ahalaney@redhat.com,
xiaolei.wang@windriver.com, rohan.g.thomas@intel.com,
Jianheng.Zhang@synopsys.com, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, bpf@vger.kernel.org,
andrew@lunn.ch, linux@armlinux.org.uk, horms@kernel.org,
florian.fainelli@broadcom.com
Subject: [PATCH net-next v5 1/5] net: stmmac: Add HDMA mapping for dw25gmac support
Date: Tue, 3 Sep 2024 22:48:11 -0700 [thread overview]
Message-ID: <20240904054815.1341712-2-jitendra.vegiraju@broadcom.com> (raw)
In-Reply-To: <20240904054815.1341712-1-jitendra.vegiraju@broadcom.com>
From: Jitendra Vegiraju <jitendra.vegiraju@broadcom.com>
Add hdma configuration support in include/linux/stmmac.h file.
The hdma configuration includes mapping of virtual DMAs to physical DMAs.
Define a new data structure stmmac_hdma_cfg to provide the mapping.
Introduce new plat_stmmacenet_data::snps_id,snps_dev_id to allow glue
drivers to specify synopsys ID and device id respectively.
These values take precedence over reading from HW register. This facility
provides a mechanism to use setup function from stmmac core module and yet
override MAC.VERSION CSR if the glue driver chooses to do so.
Signed-off-by: Jitendra Vegiraju <jitendra.vegiraju@broadcom.com>
---
include/linux/stmmac.h | 48 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 338991c08f00..eb8136680a7b 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -89,6 +89,51 @@ struct stmmac_mdio_bus_data {
bool needs_reset;
};
+/* DW25GMAC Hyper-DMA Overview
+ * Hyper-DMA allows support for large number of Virtual DMA(VDMA)
+ * channels using a smaller set of physical DMA channels(PDMA).
+ * This is supported by the mapping of VDMAs to Traffic Class(TC)
+ * and PDMA to TC in each traffic direction as shown below.
+ *
+ * VDMAs Traffic Class PDMA
+ * +--------+ +------+ +-----------+
+ * |VDMA0 |--------->| TC0 |-------->|PDMA0/TXQ0 |
+ *TX +--------+ |----->+------+ +-----------+
+ *Host=> +--------+ | +------+ +-----------+ => MAC
+ *SW |VDMA1 |---+ | TC1 | +--->|PDMA1/TXQ1 |
+ * +--------+ +------+ | +-----------+
+ * +--------+ +------+----+ +-----------+
+ * |VDMA2 |--------->| TC2 |-------->|PDMA2/TXQ1 |
+ * +--------+ +------+ +-----------+
+ * . . .
+ * +--------+ +------+ +-----------+
+ * |VDMAn-1 |--------->| TCx-1|-------->|PDMAm/TXQm |
+ * +--------+ +------+ +-----------+
+ *
+ * +------+ +------+ +------+
+ * |PDMA0 |--------->| TC0 |-------->|VDMA0 |
+ * +------+ |----->+------+ +------+
+ *MAC => +------+ | +------+ +------+
+ *RXQs |PDMA1 |---+ | TC1 | +--->|VDMA1 | => Host
+ * +------+ +------+ | +------+
+ * . . .
+ */
+
+/* Hyper-DMA mapping configuration
+ * Traffic Class associated with each VDMA/PDMA mapping
+ * is stored in corresponding array entry.
+ */
+struct stmmac_hdma_cfg {
+ u32 tx_vdmas; /* TX VDMA count */
+ u32 rx_vdmas; /* RX VDMA count */
+ u32 tx_pdmas; /* TX PDMA count */
+ u32 rx_pdmas; /* RX PDMA count */
+ u8 *tvdma_tc; /* Tx VDMA to TC mapping array */
+ u8 *rvdma_tc; /* Rx VDMA to TC mapping array */
+ u8 *tpdma_tc; /* Tx PDMA to TC mapping array */
+ u8 *rpdma_tc; /* Rx PDMA to TC mapping array */
+};
+
struct stmmac_dma_cfg {
int pbl;
int txpbl;
@@ -101,6 +146,7 @@ struct stmmac_dma_cfg {
bool multi_msi_en;
bool dche;
bool atds;
+ struct stmmac_hdma_cfg *hdma_cfg;
};
#define AXI_BLEN 7
@@ -303,5 +349,7 @@ struct plat_stmmacenet_data {
int msi_tx_base_vec;
const struct dwmac4_addrs *dwmac4_addrs;
unsigned int flags;
+ u32 snps_id;
+ u32 snps_dev_id;
};
#endif
--
2.34.1
next prev parent reply other threads:[~2024-09-04 5:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-04 5:48 [net-next v5 0/5] net: stmmac: Add PCI driver support for BCM8958x jitendra.vegiraju
2024-09-04 5:48 ` jitendra.vegiraju [this message]
2024-09-10 18:37 ` [PATCH net-next v5 1/5] net: stmmac: Add HDMA mapping for dw25gmac support Serge Semin
2024-09-11 21:50 ` Jitendra Vegiraju
2024-09-04 5:48 ` [PATCH net-next v5 2/5] net: stmmac: Add basic dw25gmac support in stmmac core jitendra.vegiraju
2024-09-10 19:24 ` Serge Semin
2024-09-16 23:32 ` Jitendra Vegiraju
2024-10-04 16:05 ` Jitendra Vegiraju
2024-10-04 23:45 ` Serge Semin
2024-10-11 0:01 ` Serge Semin
2024-10-10 23:55 ` Serge Semin
2024-10-14 18:24 ` Jitendra Vegiraju
2024-09-04 5:48 ` [PATCH net-next v5 3/5] net: stmmac: Integrate dw25gmac into stmmac hwif handling jitendra.vegiraju
2024-09-04 5:48 ` [PATCH net-next v5 4/5] net: stmmac: Add PCI driver support for BCM8958x jitendra.vegiraju
2024-09-10 19:51 ` Serge Semin
2024-09-16 23:43 ` Jitendra Vegiraju
2024-09-04 5:48 ` [PATCH net-next v5 5/5] net: stmmac: Add BCM8958x driver to build system jitendra.vegiraju
2024-09-06 12:14 ` [net-next v5 0/5] net: stmmac: Add PCI driver support for BCM8958x Serge Semin
2024-09-10 11:29 ` Paolo Abeni
2024-09-10 11:55 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240904054815.1341712-2-jitendra.vegiraju@broadcom.com \
--to=jitendra.vegiraju@broadcom.com \
--cc=Jianheng.Zhang@synopsys.com \
--cc=ahalaney@redhat.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=ast@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fancer.lancer@gmail.com \
--cc=florian.fainelli@broadcom.com \
--cc=hawk@kernel.org \
--cc=horms@kernel.org \
--cc=joabreu@synopsys.com \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=rohan.g.thomas@intel.com \
--cc=xiaolei.wang@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox