[PATCH 7/7] ARM: dts: amlogic: meson8: use correct pinctrl bank node name

[Neil Armstrong <neil.armstrong@linaro.org>]

Use the proper name for the pinctrl bank subnode, fixing:
pinctrl@9880: Unevaluated properties are not allowed ('banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'reg', 'reg' were unexpected)
	from schema $id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml#
pinctrl@84: Unevaluated properties are not allowed ('ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'reg', 'reg' were unexpected)

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm/boot/dts/amlogic/meson8.dtsi  | 4 ++--
 arch/arm/boot/dts/amlogic/meson8b.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
index 1023ff0a4f9f..6c7596c8b96b 100644
--- a/arch/arm/boot/dts/amlogic/meson8.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -353,7 +353,7 @@ pinctrl_aobus: pinctrl@84 {
 		#size-cells = <1>;
 		ranges;
 
-		gpio_ao: ao-bank@14 {
+		gpio_ao: bank@14 {
 			reg = <0x14 0x4>,
 			      <0x2c 0x4>,
 			      <0x24 0x8>;
@@ -468,7 +468,7 @@ pinctrl_cbus: pinctrl@9880 {
 		#size-cells = <1>;
 		ranges;
 
-		gpio: banks@80b0 {
+		gpio: bank@80b0 {
 			reg = <0x80b0 0x28>,
 			      <0x80e8 0x18>,
 			      <0x8120 0x18>,
diff --git a/arch/arm/boot/dts/amlogic/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi
index 641cd60781a3..c8fbeede7e38 100644
--- a/arch/arm/boot/dts/amlogic/meson8b.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -315,7 +315,7 @@ pinctrl_aobus: pinctrl@84 {
 		#size-cells = <1>;
 		ranges;
 
-		gpio_ao: ao-bank@14 {
+		gpio_ao: bank@14 {
 			reg = <0x14 0x4>,
 				<0x2c 0x4>,
 				<0x24 0x8>;
@@ -422,7 +422,7 @@ pinctrl_cbus: pinctrl@9880 {
 		#size-cells = <1>;
 		ranges;
 
-		gpio: banks@80b0 {
+		gpio: bank@80b0 {
 			reg = <0x80b0 0x28>,
 				<0x80e8 0x18>,
 				<0x8120 0x18>,

-- 
2.34.1