[PATCH 6/6] arm64: dts: imx8qxp-mek: add cm4 and related nodes

[Frank Li <Frank.Li@nxp.com>]

Add cm4 and related nodes.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index bbb94adfd64f0..83e8393a34a0c 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -21,6 +21,21 @@ chosen {
 		stdout-path = &lpuart0;
 	};
 
+	imx8x_cm4: imx8x_cm4 {
+		compatible = "fsl,imx8qxp-cm4";
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu5 0 1
+			  &lsio_mu5 1 1
+			  &lsio_mu5 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+		power-domains = <&pd IMX_SC_R_M4_0_PID0>,
+				<&pd IMX_SC_R_M4_0_MU_1A>;
+		fsl,entry-address = <0x34fe0000>;
+		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+		status = "okay";
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0 0x40000000>;
@@ -85,6 +100,48 @@ reg_usb_otg1_vbus: regulator-usbotg1-vbus {
 		enable-active-high;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		vdev0vring0: memory@90000000 {
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@90008000 {
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@90010000 {
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@90018000 {
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: memory@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: memory@90400000 {
+                        compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu_reserved@880000000 {
+			no-map;
+			reg = <0x8 0x80000000 0 0x10000000>;
+		};
+	};
+
 	sound-bt-sco {
 		compatible = "simple-audio-card";
 		simple-audio-card,bitclock-inversion;
@@ -407,6 +464,10 @@ &lpuart3 {
 	status = "okay";
 };
 
+&lsio_mu5 {
+	status = "okay";
+};
+
 &mu_m0 {
 	status = "okay";
 };
-- 
2.34.1