From: Heiko Stuebner <heiko@sntech.de>
To: linux-rockchip@lists.infradead.org
Cc: heiko@sntech.de, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, Caesar Wang <wxt@rock-chips.com>
Subject: [PATCH v2 14/14] ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
Date: Tue, 8 Oct 2024 22:39:40 +0200 [thread overview]
Message-ID: <20241008203940.2573684-15-heiko@sntech.de> (raw)
In-Reply-To: <20241008203940.2573684-1-heiko@sntech.de>
Both the node name as well as the compatible were not named
according to the binding expectations, fix that.
Fixes: 47bf3a5c9e2a ("ARM: dts: rockchip: add the sound setup for rk3036-kylin board")
Cc: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rockchip/rk3036-kylin.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index e32c73d32f0a..2f84e2805712 100644
--- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -325,8 +325,8 @@ regulator-state-mem {
&i2c2 {
status = "okay";
- rt5616: rt5616@1b {
- compatible = "rt5616";
+ rt5616: audio-codec@1b {
+ compatible = "realtek,rt5616";
reg = <0x1b>;
clocks = <&cru SCLK_I2S_OUT>;
clock-names = "mclk";
--
2.43.0
next prev parent reply other threads:[~2024-10-08 20:58 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-08 20:39 [PATCH v2 00/14] Fixing some dtbscheck warnings Heiko Stuebner
2024-10-08 20:39 ` [PATCH v2 01/14] arm64: dts: rockchip: fix i2c2 pinctrl-names property on anbernic-rg353p/v Heiko Stuebner
2024-10-08 21:02 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 02/14] arm64: dts: rockchip: Drop regulator-init-microvolt from two boards Heiko Stuebner
2024-10-08 21:07 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 03/14] arm64: dts: rockchip: Fix bluetooth properties on rk3566 box demo Heiko Stuebner
2024-10-08 21:13 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 04/14] arm64: dts: rockchip: Fix bluetooth properties on Rock960 boards Heiko Stuebner
2024-10-08 21:15 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 05/14] arm64: dts: rockchip: Remove undocumented supports-emmc property Heiko Stuebner
2024-10-08 21:17 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 06/14] arm64: dts: rockchip: Remove #cooling-cells from fan on Theobroma boards Heiko Stuebner
2024-10-09 7:16 ` Dragan Simic
2024-10-14 15:39 ` Quentin Schulz
2024-10-14 15:49 ` Dragan Simic
2024-10-14 16:29 ` Quentin Schulz
2024-10-14 17:21 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 07/14] arm64: dts: rockchip: Fix LED triggers on rk3308-roc-cc Heiko Stuebner
2024-10-09 7:19 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 08/14] arm64: dts: rockchip: remove num-slots property from rk3328-nanopi-r2s-plus Heiko Stuebner
2024-10-09 7:21 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 09/14] arm64: dts: rockchip: Remove 'enable-active-low' from two boards Heiko Stuebner
2024-10-09 5:09 ` Michael Riesch
2024-10-09 7:26 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 10/14] arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro Heiko Stuebner
2024-10-08 23:13 ` Ondřej Jirman
2024-10-08 23:31 ` Javier Martinez Canillas
2024-10-09 7:30 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 11/14] ARM: dts: rockchip: fix rk3036 acodec node Heiko Stuebner
2024-10-09 7:33 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 12/14] ARM: dts: rockchip: drop grf reference from rk3036 hdmi Heiko Stuebner
2024-10-09 7:37 ` Dragan Simic
2024-10-08 20:39 ` [PATCH v2 13/14] ARM: dts: rockchip: Fix the spi controller on rk3036 Heiko Stuebner
2024-10-09 7:42 ` Dragan Simic
2024-10-08 20:39 ` Heiko Stuebner [this message]
2024-10-09 7:44 ` [PATCH v2 14/14] ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin Dragan Simic
2024-10-10 20:27 ` [PATCH v2 00/14] Fixing some dtbscheck warnings Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241008203940.2573684-15-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=wxt@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox