[PATCH v2 03/14] arm64: dts: rockchip: Fix bluetooth properties on rk3566 box demo

[Heiko Stuebner <heiko@sntech.de>]

The expected clock-name is different, and extclk also is deprecated
in favor of txco for clocks that are not crystals.

The wakeup gpio properties are named differently too, when changing
from vendor-tree to mainline. So fix those to match the binding.

Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board")
Cc: Andy Yan <andyshrk@163.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
index 0c18406e4c59..7d4680933823 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -449,9 +449,9 @@ &uart1 {
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&pmucru CLK_RTC_32K>;
-		clock-names = "ext_clock";
-		device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
-		host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		clock-names = "txco";
+		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-- 
2.43.0