[PATCH v2 07/14] arm64: dts: rockchip: Fix LED triggers on rk3308-roc-cc

[Heiko Stuebner <heiko@sntech.de>]

There are two LEDs on the board, power and user events.
Currently both are assigned undocumented IR(-remote)
triggers that are probably only part of the vendor-kernel.

To make dtbs check happier, assign the power-led to a generic
default-on trigger and the user led to the documented rc-feedback
trigger that should mostly match its current usage.

Fixes: 4403e1237be3 ("arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc")
Cc: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 9232357f4fec..d9e191ad1d77 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -36,14 +36,14 @@ leds {
 
 		power_led: led-0 {
 			label = "firefly:red:power";
-			linux,default-trigger = "ir-power-click";
+			linux,default-trigger = "default-on";
 			default-state = "on";
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
 		user_led: led-1 {
 			label = "firefly:blue:user";
-			linux,default-trigger = "ir-user-click";
+			linux,default-trigger = "rc-feedback";
 			default-state = "off";
 			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
 		};
-- 
2.43.0