Re: [PATCH 04/11] dt-bindings: dma: stm32-dma3: prevent linked-list refactoring

[Rob Herring <robh@kernel.org>]

On Thu, Oct 10, 2024 at 04:27:54PM +0200, Amelie Delaunay wrote:
> stm32-dma3 driver refactors the linked-list in order to address the memory
> with the highest possible data width.
> It means that it can introduce up to 2 linked-list items. One with a
> transfer length multiple of channel maximum burst length and so with the
> highest possible data width. And an extra one with the latest bytes, with
> lower data width.
> Some devices (e.g. FMC ECC) don't support having several transfers instead
> of only one.
> So add the possibility to prevent linked-list refactoring, by setting bit
> 17 of the 'DMA transfer requirements' bit mask.
> 
> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
> ---
>  Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml
> index 5484848735f8ac3d2050104bbab1d986e82ba6a7..38c30271f732e0c8da48199a224a88bb647eeca7 100644
> --- a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml
> +++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml
> @@ -99,6 +99,9 @@ properties:
>          -bit 16: Prevent packing/unpacking mode
>            0x0: pack/unpack enabled when source data width/burst != destination data width/burst
>            0x1: memory data width/burst forced to peripheral data width/burst to prevent pack/unpack
> +        -bit 17: Prevent linked-list refactoring
> +          0x0: don't prevent driver to refactor the linked-list for optimal performance
> +          0x1: prevent driver to refactor the linked-list, despite not optimal performance

Driver settings don't belong in DT. Perhaps reword it in terms of h/w 
constraints (i.e. single transfer limitation).

>  
>  required:
>    - compatible
> 
> -- 
> 2.25.1
>