linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: wojackbb@gmail.com
To: wojackbb@gmail.com
Cc: chandrashekar.devegowda@intel.com,
	chiranjeevi.rapolu@linux.intel.com, haijun.liu@mediatek.com,
	m.chetan.kumar@linux.intel.com, ricardo.martinez@linux.intel.com,
	loic.poulain@linaro.org, ryazanov.s.a@gmail.com,
	johannes@sipsolutions.net, davem@davemloft.net,
	edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
	linux-arm-kernel@lists.infradead.org,
	angelogioacchino.delregno@collabora.com,
	linux-mediatek@lists.infradead.org, matthias.bgg@gmail.com,
	johan@kernel.org
Subject: [PATCH 1/2] [net,v3] net: wwan: t7xx: add PM_AUTOSUSPEND_MS_BY_DW5933E for Dell DW5933e
Date: Fri, 18 Oct 2024 15:56:26 +0800	[thread overview]
Message-ID: <20241018075626.23702-1-wojackbb@gmail.com> (raw)

From: Jack Wu <wojackbb@gmail.com>

Because optimizing the power consumption of Dell DW5933e,
Add a new auto suspend time for Dell DW5933e.

The Tests uses a small script to loop through the power_state
of Dell DW5933e.
(for example: /sys/bus/pci/devices/0000\:72\:00.0/power_state)

* If Auto suspend is 20 seconds,
  test script show power_state have 5% of the time was in D3 state
  when host don't have data packet transmission.

* Changed auto suspend time to 5 seconds,
  test script show power_state have 50% of the time was in D3 state
  when host don't have data packet transmission.

Signed-off-by: Jack Wu <wojackbb@gmail.com>
---
V3:
 * supplementary commit information
V2:
 * Fix code style error
---
---
 drivers/net/wwan/t7xx/t7xx_pci.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wwan/t7xx/t7xx_pci.c b/drivers/net/wwan/t7xx/t7xx_pci.c
index e556e5bd49ab..ec567153ea6e 100644
--- a/drivers/net/wwan/t7xx/t7xx_pci.c
+++ b/drivers/net/wwan/t7xx/t7xx_pci.c
@@ -49,6 +49,7 @@
 #define PM_SLEEP_DIS_TIMEOUT_MS		20
 #define PM_ACK_TIMEOUT_MS		1500
 #define PM_AUTOSUSPEND_MS		20000
+#define PM_AUTOSUSPEND_MS_BY_DW5933E 5000
 #define PM_RESOURCE_POLL_TIMEOUT_US	10000
 #define PM_RESOURCE_POLL_STEP_US	100
 
@@ -174,7 +175,7 @@ static int t7xx_wait_pm_config(struct t7xx_pci_dev *t7xx_dev)
 	return ret;
 }
 
-static int t7xx_pci_pm_init(struct t7xx_pci_dev *t7xx_dev)
+static int t7xx_pci_pm_init(struct t7xx_pci_dev *t7xx_dev, int pm_autosuspend_ms)
 {
 	struct pci_dev *pdev = t7xx_dev->pdev;
 
@@ -191,7 +192,7 @@ static int t7xx_pci_pm_init(struct t7xx_pci_dev *t7xx_dev)
 				DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	iowrite32(T7XX_L1_BIT(0), IREG_BASE(t7xx_dev) + DISABLE_ASPM_LOWPWR);
-	pm_runtime_set_autosuspend_delay(&pdev->dev, PM_AUTOSUSPEND_MS);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, pm_autosuspend_ms);
 	pm_runtime_use_autosuspend(&pdev->dev);
 
 	return 0;
@@ -824,7 +825,13 @@ static int t7xx_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	IREG_BASE(t7xx_dev) = pcim_iomap_table(pdev)[T7XX_PCI_IREG_BASE];
 	t7xx_dev->base_addr.pcie_ext_reg_base = pcim_iomap_table(pdev)[T7XX_PCI_EREG_BASE];
 
-	ret = t7xx_pci_pm_init(t7xx_dev);
+	if (id->vendor == 0x14c0 && id->device == 0x4d75) {
+		/* Dell DW5933e */
+		ret = t7xx_pci_pm_init(t7xx_dev, PM_AUTOSUSPEND_MS_BY_DW5933E);
+	} else {
+		/* Other devices */
+		ret = t7xx_pci_pm_init(t7xx_dev, PM_AUTOSUSPEND_MS);
+	}
 	if (ret)
 		return ret;
 
-- 
2.34.1


From cd3c4bb25637348806e92e2fe9d51a05c5ddbafd Mon Sep 17 00:00:00 2001
From: Jack Wu <wojackbb@gmail.com>
Date: Fri, 18 Oct 2024 15:44:11 +0800
Subject: [PATCH 2/2] Add support for Sierra Wireless EM86xx with USB-id
 0x1199:0x90e5 & 0x1199:0x90e4.

It is 0x1199:0x90e5
T:  Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 14 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1199 ProdID=90e5 Rev= 5.15
S:  Manufacturer=Sierra Wireless, Incorporated
S:  Product=Semtech EM8695 Mobile Broadband Adapter
S:  SerialNumber=004403161882339
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

It is 0x1199:0x90e4
T:  Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 16 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1199 ProdID=90e4 Rev= 0.00
S:  Manufacturer=Sierra Wireless, Incorporated
S:  SerialNumber=004403161882339
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: JackBB Wu <wojackbb@gmail.com>
---
 drivers/usb/serial/qcserial.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 703a9c563557..bd0768e61b26 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -168,6 +168,8 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x1199, 0x90d2)},	/* Sierra Wireless EM9191 QDL */
 	{DEVICE_SWI(0x1199, 0xc080)},	/* Sierra Wireless EM7590 QDL */
 	{DEVICE_SWI(0x1199, 0xc081)},	/* Sierra Wireless EM7590 */
+	{DEVICE_SWI(0x1199, 0x90e4)},	/* Sierra Wireless EM86xx QDL*/
+	{DEVICE_SWI(0x1199, 0x90e5)},	/* Sierra Wireless EM86xx */
 	{DEVICE_SWI(0x413c, 0x81a2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a3)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a4)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
-- 
2.34.1



             reply	other threads:[~2024-10-18  8:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-18  7:56 wojackbb [this message]
  -- strict thread matches above, loose matches on Subject: below --
2024-10-18  7:53 [PATCH 1/2] [net,v3] net: wwan: t7xx: add PM_AUTOSUSPEND_MS_BY_DW5933E for Dell DW5933e wojackbb
2024-10-18 18:12 ` Andrew Lunn
2024-10-18  7:48 wojackbb
2024-10-18 18:12 ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241018075626.23702-1-wojackbb@gmail.com \
    --to=wojackbb@gmail.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=chandrashekar.devegowda@intel.com \
    --cc=chiranjeevi.rapolu@linux.intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=haijun.liu@mediatek.com \
    --cc=johan@kernel.org \
    --cc=johannes@sipsolutions.net \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=loic.poulain@linaro.org \
    --cc=m.chetan.kumar@linux.intel.com \
    --cc=matthias.bgg@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=ricardo.martinez@linux.intel.com \
    --cc=ryazanov.s.a@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).