linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Ryan Walklin <ryan@testtoast.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Chris Morgan <macroalpha82@gmail.com>,
	Philippe Simons <simons.philippe@gmail.com>,
	linux-sound@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, devicetree@vger.kernel.org,
	linux-clk@vger.kernel.org
Subject: Re: [PATCH v2 6/7] arm64: dts: allwinner: h616: Add audio codec node
Date: Sun, 20 Oct 2024 11:56:33 +0100	[thread overview]
Message-ID: <20241020115633.67582352@minigeek.lan> (raw)
In-Reply-To: <20241020083124.174724-7-ryan@testtoast.com>

On Sun, 20 Oct 2024 21:30:56 +1300
Ryan Walklin <ryan@testtoast.com> wrote:

Hi,

> Now that the sun4i codec driver supports the H616, add a node in the
> device tree for it (correcting the spdif block location at the same
> time).

I can confirm that the spdif block indeed just moved without any changes
(to preserve the MMIO base address ordering in the DT), and that the
values for the base address, the IRQ, the clocks, the reset gate and
the DMA channels of the new audio codec match the manual:

> Signed-off-by: Ryan Walklin <ryan@testtoast.com>

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> 
> ---
> Changelog v1..v2:
> - Remove 4x clock from the codec block, this is not used in the driver and does not require a reference.
> - Move the codec (and spdif) blocks below the lradc block so that they are in address-order.
> ---
>  .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 44 ++++++++++++-------
>  1 file changed, 29 insertions(+), 15 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> index 0131f9b3132b8..3788f65a7d0eb 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> @@ -762,21 +762,6 @@ mdio0: mdio {
>  			};
>  		};
>  
> -		spdif: spdif@5093000 {
> -			compatible = "allwinner,sun50i-h616-spdif";
> -			reg = <0x05093000 0x400>;
> -			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
> -			clock-names = "apb", "spdif";
> -			resets = <&ccu RST_BUS_SPDIF>;
> -			dmas = <&dma 2>;
> -			dma-names = "tx";
> -			pinctrl-names = "default";
> -			pinctrl-0 = <&spdif_tx_pin>;
> -			#sound-dai-cells = <0>;
> -			status = "disabled";
> -		};
> -
>  		gpadc: adc@5070000 {
>  			compatible = "allwinner,sun50i-h616-gpadc",
>  				     "allwinner,sun20i-d1-gpadc";
> @@ -811,6 +796,35 @@ lradc: lradc@5070800 {
>  			status = "disabled";
>  		};
>  
> +		spdif: spdif@5093000 {
> +			compatible = "allwinner,sun50i-h616-spdif";
> +			reg = <0x05093000 0x400>;
> +			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
> +			clock-names = "apb", "spdif";
> +			resets = <&ccu RST_BUS_SPDIF>;
> +			dmas = <&dma 2>;
> +			dma-names = "tx";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&spdif_tx_pin>;
> +			#sound-dai-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		codec: codec@05096000 {
> +			#sound-dai-cells = <0>;
> +			compatible = "allwinner,sun50i-h616-codec";
> +			reg = <0x05096000 0x31c>;
> +			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_AUDIO_CODEC>,
> +				 <&ccu CLK_AUDIO_CODEC_1X>;
> +			clock-names = "apb", "codec";
> +			resets = <&ccu RST_BUS_AUDIO_CODEC>;
> +			dmas = <&dma 6>;
> +			dma-names = "tx";
> +			status = "disabled";
> +		};
> +
>  		usbotg: usb@5100000 {
>  			compatible = "allwinner,sun50i-h616-musb",
>  				     "allwinner,sun8i-h3-musb";



  reply	other threads:[~2024-10-20 10:59 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-20  8:30 [PATCH v2 0/7] ASoC: add Allwinner H616 audio codec support Ryan Walklin
2024-10-20  8:30 ` [PATCH v2 1/7] clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL Ryan Walklin
2024-10-20 11:56   ` Andre Przywara
2024-10-20  8:30 ` [PATCH v2 2/7] dt-bindings: allwinner: add H616 sun4i audio codec binding Ryan Walklin
2024-10-20  9:16   ` Rob Herring (Arm)
2024-10-20  8:30 ` [PATCH v2 3/7] ASoC: sun4i-codec: Add support for different DAC FIFOC addresses to quirks Ryan Walklin
2024-10-20  8:30 ` [PATCH v2 4/7] ASoC: sun4i-codec: Add playback only flag " Ryan Walklin
2024-10-20 10:37   ` Andre Przywara
2024-10-20  8:30 ` [PATCH v2 5/7] ASoC: sun4i-codec: support allwinner H616 codec Ryan Walklin
2024-10-20 11:59   ` Andre Przywara
2024-10-21 15:46     ` Mark Brown
2024-10-20  8:30 ` [PATCH v2 6/7] arm64: dts: allwinner: h616: Add audio codec node Ryan Walklin
2024-10-20 10:56   ` Andre Przywara [this message]
2024-10-20  8:30 ` [PATCH v2 7/7] arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards Ryan Walklin
2024-10-21 17:58 ` [PATCH v2 0/7] ASoC: add Allwinner H616 audio codec support Rob Herring (Arm)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241020115633.67582352@minigeek.lan \
    --to=andre.przywara@arm.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=macroalpha82@gmail.com \
    --cc=perex@perex.cz \
    --cc=ryan@testtoast.com \
    --cc=samuel@sholland.org \
    --cc=simons.philippe@gmail.com \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).