From: Bjorn Helgaas <helgaas@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: "Bjorn Helgaas" <bhelgaas@google.com>,
"Richard Zhu" <hongxing.zhu@nxp.com>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
alyssa@rosenzweig.io, bpf@vger.kernel.org, broonie@kernel.org,
jgg@ziepe.ca, joro@8bytes.org, lgirdwood@gmail.com,
maz@kernel.org, p.zabel@pengutronix.de, robin.murphy@arm.com,
will@kernel.org
Subject: Re: [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges
Date: Wed, 30 Oct 2024 16:00:43 -0500 [thread overview]
Message-ID: <20241030210043.GA1219525@bhelgaas> (raw)
In-Reply-To: <20241024-imx95_lut-v3-1-7509c9bbab86@nxp.com>
On Thu, Oct 24, 2024 at 06:34:44PM -0400, Frank Li wrote:
> Some PCIe host bridges require special handling when enabling or disabling
> PCIe Endpoints. For example, the i.MX95 platform has a lookup table to map
> Requester IDs to StreamIDs, which are used by the SMMU and MSI controller
> to identify the source of DMA accesses.
>
> Without this mapping, DMA accesses may target unintended memory, which
> would corrupt memory or read the wrong data.
>
> Add a host bridge .enable_device() hook the imx6 driver can use to
> configure the Requester ID to StreamID mapping. The hardware table isn't
> big enough to map all possible Requester IDs, so this hook may fail if no
> table space is available. In that case, return failure from
> pci_enable_device().
>
> It might make more sense to make pci_set_master() decline to enable bus
> mastering and return failure, but it currently doesn't have a way to return
> failure.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Merge along with the imx6 change.
> ---
> Change from v2 to v3
> - use Bjorn suggest's commit message.
> - call disable_device() when error happen.
>
> Change from v1 to v2
> - move enable(disable)device ops to pci_host_bridge
> ---
> drivers/pci/pci.c | 23 ++++++++++++++++++++++-
> include/linux/pci.h | 2 ++
> 2 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 7d85c04fbba2a..5e0cb9b6f4d4f 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2056,6 +2056,7 @@ int __weak pcibios_enable_device(struct pci_dev *dev, int bars)
> static int do_pci_enable_device(struct pci_dev *dev, int bars)
> {
> int err;
> + struct pci_host_bridge *host_bridge;
> struct pci_dev *bridge;
> u16 cmd;
> u8 pin;
> @@ -2068,9 +2069,16 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars)
> if (bridge)
> pcie_aspm_powersave_config_link(bridge);
>
> + host_bridge = pci_find_host_bridge(dev->bus);
> + if (host_bridge && host_bridge->enable_device) {
> + err = host_bridge->enable_device(host_bridge, dev);
> + if (err)
> + return err;
> + }
> +
> err = pcibios_enable_device(dev, bars);
> if (err < 0)
> - return err;
> + goto err_enable;
> pci_fixup_device(pci_fixup_enable, dev);
>
> if (dev->msi_enabled || dev->msix_enabled)
> @@ -2085,6 +2093,13 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars)
> }
>
> return 0;
> +
> +err_enable:
> + if (host_bridge && host_bridge->disable_device)
> + host_bridge->disable_device(host_bridge, dev);
> +
> + return err;
> +
> }
>
> /**
> @@ -2262,12 +2277,18 @@ void pci_disable_enabled_device(struct pci_dev *dev)
> */
> void pci_disable_device(struct pci_dev *dev)
> {
> + struct pci_host_bridge *host_bridge;
> +
> dev_WARN_ONCE(&dev->dev, atomic_read(&dev->enable_cnt) <= 0,
> "disabling already-disabled device");
>
> if (atomic_dec_return(&dev->enable_cnt) != 0)
> return;
>
> + host_bridge = pci_find_host_bridge(dev->bus);
> + if (host_bridge && host_bridge->disable_device)
> + host_bridge->disable_device(host_bridge, dev);
> +
> do_pci_disable_device(dev);
>
> dev->is_busmaster = 0;
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 573b4c4c2be61..ac15b02e14ddd 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -578,6 +578,8 @@ struct pci_host_bridge {
> u8 (*swizzle_irq)(struct pci_dev *, u8 *); /* Platform IRQ swizzler */
> int (*map_irq)(const struct pci_dev *, u8, u8);
> void (*release_fn)(struct pci_host_bridge *);
> + int (*enable_device)(struct pci_host_bridge *bridge, struct pci_dev *dev);
> + void (*disable_device)(struct pci_host_bridge *bridge, struct pci_dev *dev);
> void *release_data;
> unsigned int ignore_reset_delay:1; /* For entire hierarchy */
> unsigned int no_ext_tags:1; /* No Extended Tags */
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2024-10-30 21:02 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-24 22:34 [PATCH v3 0/2] PCI: add enabe(disable)_device() hook for bridge Frank Li
2024-10-24 22:34 ` [PATCH v3 1/2] PCI: Add enable_device() and disable_device() callbacks for bridges Frank Li
2024-10-30 21:00 ` Bjorn Helgaas [this message]
2024-11-01 16:58 ` Marc Zyngier
2024-11-02 11:10 ` Manivannan Sadhasivam
2024-11-02 11:32 ` Marc Zyngier
2024-11-02 11:54 ` Manivannan Sadhasivam
2024-11-02 12:24 ` Marc Zyngier
2024-11-02 12:48 ` Manivannan Sadhasivam
2024-10-24 22:34 ` [PATCH v3 2/2] PCI: imx6: Add IOMMU and ITS MSI support for i.MX95 Frank Li
2024-11-01 17:23 ` Robin Murphy
2024-11-02 11:49 ` Manivannan Sadhasivam
2024-11-02 17:26 ` Frank Li
2024-11-02 22:18 ` Marc Zyngier
2024-11-03 6:23 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241030210043.GA1219525@bhelgaas \
--to=helgaas@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=alyssa@rosenzweig.io \
--cc=bhelgaas@google.com \
--cc=bpf@vger.kernel.org \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=jgg@ziepe.ca \
--cc=joro@8bytes.org \
--cc=kernel@pengutronix.de \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=maz@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox