public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>,
	linux-phy@lists.infradead.org, linux-mmc@vger.kernel.org,
	Gregory CLEMENT <gregory.clement@bootlin.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	devicetree@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
	Andi Shyti <andi.shyti@kernel.org>, Vinod Koul <vkoul@kernel.org>,
	linux-watchdog@vger.kernel.org,
	Thomas Gleixner <tglx@linutronix.de>,
	Chen-Yu Tsai <wens@csie.org>,
	Samuel Holland <samuel@sholland.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	linux-usb@vger.kernel.org,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Conor Dooley <conor+dt@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>
Subject: Re: [PATCH 00/14] arm64: dts: allwinner: Add basic Allwinner A523 support
Date: Mon, 11 Nov 2024 17:42:25 +0000	[thread overview]
Message-ID: <20241111174225.7360c6e4@donnerap.manchester.arm.com> (raw)
In-Reply-To: <173133346581.1281779.16221268010355943435.robh@kernel.org>

On Mon, 11 Nov 2024 09:32:53 -0600
"Rob Herring (Arm)" <robh@kernel.org> wrote:

Hi Rob,

> On Mon, 11 Nov 2024 01:30:19 +0000, Andre Przywara wrote:
> > Hi,
> > 
> > this series adds basic DT support for the Allwinner A523 SoC, plus the
> > Avaota-A1 router board using the T527 package variant of that SoC.[1]
> > Functionality-wise it relies on the pinctrl[2] and clock[3] support
> > series, though there is no direct code dependency series to this series
> > (apart from the respective binding patches in the two series').
> > 
> > Most of the patches add DT binding documentation for the most basic
> > peripherals, the vast majority of them actually being already supported,
> > courtesy of identical IP being used. This includes MMC and USB 2.0, so
> > with the above mentioned clock and pinctrl support this gives an already
> > somewhat usable mainline support for this new SoC family.
> > The watchdog is not completely compatible, but is an easy addition, so
> > this bit is included in here as well.
> > 
> > The A523 features 8 Arm Cortex-A55 cores, organised in two clusters,
> > clocked separately, with different OPP limits, in some kind of
> > little/LITTLE configuration. The GPU is a Arm Mali G57 MC01, and the chip
> > also features a single PCIe 2.1 lane, sharing a PHY with some USB 3.1
> > controller - which means only one of the two can be used.
> > The rest of the SoC is the usual soup of multimedia SoC IP, with eDP
> > support and two Gigabit Ethernet MACs among the highlights.
> > 
> > The main feature is patch 11/14, which adds the SoC .dtsi. This for now
> > is limited to the parts that are supported and could be tested. At the
> > moment there is no PSCI firmware, even the TF-A port from the BSP does
> > not seem to work for me. That's why the secondary cores have been omitted
> > for now, among other instances of some IP that I couldn't test yet.
> > I plan to add them in one of the next revisions.
> > 
> > The last patch adds basic support for the Avaota-A1 router board,
> > designed by YuzukiHD, with some boards now built by Pine64.
> > 
> > The mainline firmware side in general is somewhat lacking still: I have
> > basic U-Boot support working (including MMC and USB), although still
> > without DRAM support. This is for now covered by some binary blob found
> > in the (otherwise Open Source) Syterkit firmware, which also provides
> > the BSP versions of TF-A and the required (RISC-V) management core
> > firmware. Fortunately we have indications that DRAM support is not that
> > tricky, as the IP blocks are very similar to already supported, and dev
> > boards are on their way to the right people.
> > 
> > Meanwhile I would like people to have a look at those DT bits here. Please
> > compare them to the available user manual, and test them if you have access
> > to hardware.
> > 
> > Based on v6.12-rc1.
> > I pushed a branch with all the three series combined here:
> > https://github.com/apritzel/linux/commits/a523-v1/
> > 
> > Cheers,
> > Andre
> > 
> > [1] https://linux-sunxi.org/A523#Family_of_sun55iw3
> > [2] https://lore.kernel.org/linux-sunxi/20241111005750.13071-1-andre.przywara@arm.com/T/#t
> > [3] https://lore.kernel.org/linux-sunxi/20241111004722.10130-1-andre.przywara@arm.com/T/#t
> > 
> > Andre Przywara (14):
> >   dt-bindings: mmc: sunxi: Simplify compatible string listing
> >   dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523
> >   dt-bindings: watchdog: sunxi: add Allwinner A523 compatible string
> >   watchdog: sunxi_wdt: Add support for Allwinner A523
> >   dt-bindings: i2c: mv64xxx: Add Allwinner A523 compatible string
> >   dt-bindings: irq: sun7i-nmi: document the Allwinner A523 NMI
> >     controller
> >   dt-bindings: phy: document Allwinner A523 USB-2.0 PHY
> >   dt-bindings: usb: sunxi-musb: add Allwinner A523 compatible string
> >   dt-bindings: usb: add A523 compatible string for EHCI and OCHI
> >   dt-bindings: rtc: sun6i: Add Allwinner A523 support
> >   arm64: dts: allwinner: Add Allwinner A523 .dtsi file
> >   dt-bindings: vendor-prefixes: Add YuzukiHD name
> >   dt-bindings: arm: sunxi: Add Avaota A1 board
> >   arm64: dts: allwinner: a523: add Avaota-A1 router support
> > 
> >  .../devicetree/bindings/arm/sunxi.yaml        |   5 +
> >  .../bindings/i2c/marvell,mv64xxx-i2c.yaml     |   1 +
> >  .../allwinner,sun7i-a20-sc-nmi.yaml           |   1 +
> >  .../bindings/mmc/allwinner,sun4i-a10-mmc.yaml |  40 +-
> >  .../phy/allwinner,sun50i-a64-usb-phy.yaml     |  10 +-
> >  .../bindings/rtc/allwinner,sun6i-a31-rtc.yaml |   4 +-
> >  .../usb/allwinner,sun4i-a10-musb.yaml         |   1 +
> >  .../devicetree/bindings/usb/generic-ehci.yaml |   1 +
> >  .../devicetree/bindings/usb/generic-ohci.yaml |   1 +
> >  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
> >  .../watchdog/allwinner,sun4i-a10-wdt.yaml     |   2 +
> >  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
> >  .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 386 ++++++++++++++++++
> >  .../dts/allwinner/sun55i-t527-avaota-a1.dts   | 311 ++++++++++++++
> >  drivers/watchdog/sunxi_wdt.c                  |  11 +
> >  15 files changed, 751 insertions(+), 26 deletions(-)
> >  create mode 100644 arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> >  create mode 100644 arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
> > 
> > --
> > 2.46.2
> > 
> > 
> >   
> 
> 
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> New warnings running 'make CHECK_DTBS=y allwinner/sun55i-t527-avaota-a1.dtb' for 20241111013033.22793-1-andre.przywara@arm.com:
> 
> In file included from arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts:6:
> arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi:6:10: fatal error: dt-bindings/clock/sun55i-a523-ccu.h: No such file or directory
>     6 | #include <dt-bindings/clock/sun55i-a523-ccu.h>

Argh, the headers, forgot about them! I was hoping there would only be a
complaint about the undocumented compatible strings, and I didn't want to
tie the three series together unnecessarily, to avoid a harder to handle
28-patch series.

I hope this doesn't prevent actual review by people, my github has
the combined story, in case people want to avoid the issue:
https://github.com/apritzel/linux/commits/a523-v1/

Cheers,
Andre

>       |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
> make[3]: *** [scripts/Makefile.dtbs:129: arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dtb] Error 1
> make[2]: *** [scripts/Makefile.build:478: arch/arm64/boot/dts/allwinner] Error 2
> make[2]: Target 'arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dtb' not remade because of errors.
> make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1399: allwinner/sun55i-t527-avaota-a1.dtb] Error 2
> make: *** [Makefile:224: __sub-make] Error 2
> make: Target 'allwinner/sun55i-t527-avaota-a1.dtb' not remade because of errors.
> 
> 
> 
> 
> 



      reply	other threads:[~2024-11-11 17:48 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-11  1:30 [PATCH 00/14] arm64: dts: allwinner: Add basic Allwinner A523 support Andre Przywara
2024-11-11  1:30 ` [PATCH 01/14] dt-bindings: mmc: sunxi: Simplify compatible string listing Andre Przywara
2024-11-11 20:34   ` Conor Dooley
2024-11-11  1:30 ` [PATCH 02/14] dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523 Andre Przywara
2024-11-11 20:35   ` Conor Dooley
2024-11-11  1:30 ` [PATCH 03/14] dt-bindings: watchdog: sunxi: add Allwinner A523 compatible string Andre Przywara
2024-11-11 20:35   ` Conor Dooley
2025-01-18 11:47   ` Jernej Škrabec
2024-11-11  1:30 ` [PATCH 04/14] watchdog: sunxi_wdt: Add support for Allwinner A523 Andre Przywara
2025-01-18 11:45   ` Jernej Škrabec
2024-11-11  1:30 ` [PATCH 05/14] dt-bindings: i2c: mv64xxx: Add Allwinner A523 compatible string Andre Przywara
2024-11-11 20:36   ` Conor Dooley
2024-11-18 23:07   ` Andi Shyti
2024-11-11  1:30 ` [PATCH 06/14] dt-bindings: irq: sun7i-nmi: document the Allwinner A523 NMI controller Andre Przywara
2025-01-18 13:17   ` Jernej Škrabec
2024-11-11  1:30 ` [PATCH 07/14] dt-bindings: phy: document Allwinner A523 USB-2.0 PHY Andre Przywara
2024-11-11 20:38   ` Conor Dooley
2024-11-11  1:30 ` [PATCH 08/14] dt-bindings: usb: sunxi-musb: add Allwinner A523 compatible string Andre Przywara
2024-11-11 20:38   ` Conor Dooley
2024-11-11  1:30 ` [PATCH 09/14] dt-bindings: usb: add A523 compatible string for EHCI and OCHI Andre Przywara
2024-11-11 20:38   ` Conor Dooley
2024-11-11  1:30 ` [PATCH 10/14] dt-bindings: rtc: sun6i: Add Allwinner A523 support Andre Przywara
2024-11-11 20:39   ` Conor Dooley
2024-11-11 20:49   ` (subset) " Alexandre Belloni
2024-11-11  1:30 ` [PATCH 11/14] arm64: dts: allwinner: Add Allwinner A523 .dtsi file Andre Przywara
2025-01-18 16:28   ` Jernej Škrabec
2024-11-11  1:30 ` [PATCH 12/14] dt-bindings: vendor-prefixes: Add YuzukiHD name Andre Przywara
2024-11-11 20:39   ` Conor Dooley
2024-11-11  1:30 ` [PATCH 13/14] dt-bindings: arm: sunxi: Add Avaota A1 board Andre Przywara
2024-11-11 20:39   ` Conor Dooley
2024-11-11  1:30 ` [PATCH 14/14] arm64: dts: allwinner: a523: add Avaota-A1 router support Andre Przywara
2024-11-11 15:32 ` [PATCH 00/14] arm64: dts: allwinner: Add basic Allwinner A523 support Rob Herring (Arm)
2024-11-11 17:42   ` Andre Przywara [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241111174225.7360c6e4@donnerap.manchester.arm.com \
    --to=andre.przywara@arm.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andi.shyti@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=gregory.clement@bootlin.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=tglx@linutronix.de \
    --cc=ulf.hansson@linaro.org \
    --cc=vkoul@kernel.org \
    --cc=wens@csie.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox