public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Christian Bruel <christian.bruel@foss.st.com>
To: <lpieralisi@kernel.org>, <kw@linux.com>,
	<manivannan.sadhasivam@linaro.org>, <robh@kernel.org>,
	<bhelgaas@google.com>, <krzk+dt@kernel.org>,
	<conor+dt@kernel.org>, <mcoquelin.stm32@gmail.com>,
	<alexandre.torgue@foss.st.com>, <p.zabel@pengutronix.de>,
	<cassel@kernel.org>, <quic_schintav@quicinc.com>,
	<fabrice.gasnier@foss.st.com>
Cc: <linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Christian Bruel <christian.bruel@foss.st.com>
Subject: [PATCH 4/5] PCI: stm32: Add PCIe endpoint support for STM32MP25
Date: Tue, 12 Nov 2024 17:19:24 +0100	[thread overview]
Message-ID: <20241112161925.999196-5-christian.bruel@foss.st.com> (raw)
In-Reply-To: <20241112161925.999196-1-christian.bruel@foss.st.com>

Add driver to configure the STM32MP25 SoC PCIe Gen2 controller based on the
DesignWare PCIe core in endpoint mode.
Uses the common reference clock provided by the host.

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 drivers/pci/controller/dwc/Kconfig         |  12 +
 drivers/pci/controller/dwc/Makefile        |   1 +
 drivers/pci/controller/dwc/pcie-stm32-ep.c | 433 +++++++++++++++++++++
 3 files changed, 446 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32-ep.c

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 50a014c2dfd0..29b7f45f82c7 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -470,4 +470,16 @@ config PCIE_STM32
 
 	  This driver can also be built as a module. If so, the module
 	  will be called pcie-stm32.
+
+config PCIE_STM32_EP
+	tristate "STMicroelectronics STM32MP25 PCIe Controller (endpoint mode)"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	help
+	  Enables endpoint support for DesignWare core based PCIe controller in found
+	  in STM32MP25 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pcie-stm32-ep.
 endmenu
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 576d99cb3bc5..caebd98f6dd3 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
 obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
 obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4.o
 obj-$(CONFIG_PCIE_STM32) += pcie-stm32.o
+obj-$(CONFIG_PCIE_STM32_EP) += pcie-stm32-ep.o
 
 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.
diff --git a/drivers/pci/controller/dwc/pcie-stm32-ep.c b/drivers/pci/controller/dwc/pcie-stm32-ep.c
new file mode 100644
index 000000000000..9fc43046531d
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-stm32-ep.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics STM32MP25 PCIe endpoint driver.
+ *
+ * Copyright (C) 2024 STMicroelectronics
+ * Author: Christian Bruel <christian.bruel@foss.st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "pcie-designware.h"
+#include "pcie-stm32.h"
+
+enum stm32_pcie_ep_link_status {
+	STM32_PCIE_EP_LINK_DISABLED,
+	STM32_PCIE_EP_LINK_ENABLED,
+};
+
+struct stm32_pcie {
+	struct dw_pcie *pci;
+	struct regmap *regmap;
+	struct reset_control *rst;
+	struct phy *phy;
+	struct clk *clk;
+	struct gpio_desc *reset_gpio;
+	enum stm32_pcie_ep_link_status link_status;
+	unsigned int perst_irq;
+};
+
+static const struct of_device_id stm32_pcie_ep_of_match[] = {
+	{ .compatible = "st,stm32mp25-pcie-ep" },
+	{},
+};
+
+static void stm32_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	enum pci_barno bar;
+
+	for (bar = BAR_0; bar <= PCI_STD_NUM_BARS; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+
+	/* Defer Completion Requests until link started */
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_REQ_RETRY_EN,
+			   STM32MP25_PCIECR_REQ_RETRY_EN);
+}
+
+static int stm32_pcie_enable_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	int ret;
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_LTSSM_EN,
+			   STM32MP25_PCIECR_LTSSM_EN);
+
+	ret = dw_pcie_wait_for_link(pci);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_REQ_RETRY_EN,
+			   0);
+
+	return 0;
+}
+
+static void stm32_pcie_disable_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_REQ_RETRY_EN,
+			   STM32MP25_PCIECR_REQ_RETRY_EN);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR, STM32MP25_PCIECR_LTSSM_EN, 0);
+}
+
+static int stm32_pcie_start_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	int ret;
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_ENABLED) {
+		dev_dbg(pci->dev, "Link is already enabled\n");
+		return 0;
+	}
+
+	ret = stm32_pcie_enable_link(pci);
+	if (ret) {
+		dev_err(pci->dev, "PCIe cannot establish link: %d\n", ret);
+		return ret;
+	}
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_ENABLED;
+
+	enable_irq(stm32_pcie->perst_irq);
+
+	return 0;
+}
+
+static void stm32_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_DISABLED) {
+		dev_dbg(pci->dev, "Link is already disabled\n");
+		return;
+	}
+
+	disable_irq(stm32_pcie->perst_irq);
+
+	stm32_pcie_disable_link(pci);
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_DISABLED;
+}
+
+static int stm32_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+				unsigned int type, u16 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	switch (type) {
+	case PCI_IRQ_INTX:
+		return dw_pcie_ep_raise_intx_irq(ep, func_no);
+	case PCI_IRQ_MSI:
+		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+	default:
+		dev_err(pci->dev, "UNKNOWN IRQ type\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct pci_epc_features stm32_pcie_epc_features = {
+	.msi_capable = true,
+	.align = 1 << 16,
+};
+
+static const struct pci_epc_features*
+stm32_pcie_get_features(struct dw_pcie_ep *ep)
+{
+	return &stm32_pcie_epc_features;
+}
+
+static const struct dw_pcie_ep_ops stm32_pcie_ep_ops = {
+	.init = stm32_pcie_ep_init,
+	.raise_irq = stm32_pcie_raise_irq,
+	.get_features = stm32_pcie_get_features,
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = stm32_pcie_start_link,
+	.stop_link = stm32_pcie_stop_link,
+};
+
+static int stm32_pcie_enable_resources(struct stm32_pcie *stm32_pcie)
+{
+	int ret;
+
+	ret = phy_init(stm32_pcie->phy);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret)
+		phy_exit(stm32_pcie->phy);
+
+	return ret;
+}
+
+static void stm32_pcie_disable_resources(struct stm32_pcie *stm32_pcie)
+{
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	phy_exit(stm32_pcie->phy);
+}
+
+static void stm32_pcie_perst_assert(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	struct device *dev = pci->dev;
+
+	dev_dbg(dev, "PERST asserted by host. Shutting down the PCIe link\n");
+
+	/*
+	 * Do not try to release resources if the PERST# is
+	 * asserted before the link is started.
+	 */
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_DISABLED) {
+		dev_dbg(pci->dev, "Link is already disabled\n");
+		return;
+	}
+
+	stm32_pcie_disable_link(pci);
+
+	stm32_pcie_disable_resources(stm32_pcie);
+
+	pm_runtime_put_sync(dev);
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_DISABLED;
+}
+
+static void stm32_pcie_perst_deassert(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	struct device *dev = pci->dev;
+	struct dw_pcie_ep *ep = &pci->ep;
+	int ret;
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_ENABLED) {
+		dev_dbg(pci->dev, "Link is already enabled\n");
+		return;
+	}
+
+	dev_dbg(dev, "PERST de-asserted by host. Starting link training\n");
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm runtime resume failed: %d\n", ret);
+		return;
+	}
+
+	ret = stm32_pcie_enable_resources(stm32_pcie);
+	if (ret) {
+		dev_err(dev, "Failed to enable resources: %d\n", ret);
+		pm_runtime_put_sync(dev);
+		return;
+	}
+
+	ret = dw_pcie_ep_init_registers(ep);
+	if (ret) {
+		dev_err(dev, "Failed to complete initialization: %d\n", ret);
+		stm32_pcie_disable_resources(stm32_pcie);
+		pm_runtime_put_sync(dev);
+		return;
+	}
+
+	pci_epc_init_notify(ep->epc);
+
+	ret = stm32_pcie_enable_link(pci);
+	if (ret) {
+		dev_err(dev, "PCIe Cannot establish link: %d\n", ret);
+		stm32_pcie_disable_resources(stm32_pcie);
+		pm_runtime_put_sync(dev);
+		return;
+	}
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_ENABLED;
+}
+
+static irqreturn_t stm32_pcie_ep_perst_irq_thread(int irq, void *data)
+{
+	struct stm32_pcie *stm32_pcie = data;
+	struct dw_pcie *pci = stm32_pcie->pci;
+	u32 perst;
+
+	perst = gpiod_get_value(stm32_pcie->reset_gpio);
+	if (perst)
+		stm32_pcie_perst_assert(pci);
+	else
+		stm32_pcie_perst_deassert(pci);
+
+	return IRQ_HANDLED;
+}
+
+static int stm32_add_pcie_ep(struct stm32_pcie *stm32_pcie,
+			     struct platform_device *pdev)
+{
+	struct dw_pcie *pci = stm32_pcie->pci;
+	struct dw_pcie_ep *ep = &pci->ep;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				 STM32MP25_PCIECR_TYPE_MASK,
+				 STM32MP25_PCIECR_EP);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm runtime resume failed: %d\n", ret);
+		return ret;
+	}
+
+	reset_control_assert(stm32_pcie->rst);
+	reset_control_deassert(stm32_pcie->rst);
+
+	ep->ops = &stm32_pcie_ep_ops;
+
+	ret = dw_pcie_ep_init(ep);
+	if (ret) {
+		dev_err(dev, "failed to initialize ep: %d\n", ret);
+		pm_runtime_put_sync(dev);
+		return ret;
+	}
+
+	ret = stm32_pcie_enable_resources(stm32_pcie);
+	if (ret) {
+		dev_err(dev, "failed to enable resources: %d\n", ret);
+		dw_pcie_ep_deinit(ep);
+		pm_runtime_put_sync(dev);
+		return ret;
+	}
+
+	ret = dw_pcie_ep_init_registers(ep);
+	if (ret) {
+		dev_err(dev, "Failed to initialize DWC endpoint registers\n");
+		stm32_pcie_disable_resources(stm32_pcie);
+		dw_pcie_ep_deinit(ep);
+		pm_runtime_put_sync(dev);
+		return ret;
+	}
+
+	pci_epc_init_notify(ep->epc);
+
+	return 0;
+}
+
+static int stm32_pcie_probe(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie;
+	struct dw_pcie *dw;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	stm32_pcie = devm_kzalloc(dev, sizeof(*stm32_pcie), GFP_KERNEL);
+	if (!stm32_pcie)
+		return -ENOMEM;
+
+	dw = devm_kzalloc(dev, sizeof(*dw), GFP_KERNEL);
+	if (!dw)
+		return -ENOMEM;
+	stm32_pcie->pci = dw;
+
+	dw->dev = dev;
+	dw->ops = &dw_pcie_ops;
+
+	stm32_pcie->regmap = syscon_regmap_lookup_by_compatible("st,stm32mp25-syscfg");
+	if (IS_ERR(stm32_pcie->regmap))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->regmap),
+				     "No syscfg specified\n");
+
+	stm32_pcie->phy = devm_phy_get(dev, "pcie-phy");
+	if (IS_ERR(stm32_pcie->phy))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->phy),
+				     "failed to get pcie-phy\n");
+
+	stm32_pcie->clk = devm_clk_get(dev, "core");
+	if (IS_ERR(stm32_pcie->clk))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->clk),
+				     "Failed to get PCIe clock source\n");
+
+	stm32_pcie->rst = devm_reset_control_get_exclusive(dev, "core");
+	if (IS_ERR(stm32_pcie->rst))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->rst),
+				     "Failed to get PCIe reset\n");
+
+	stm32_pcie->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_IN);
+	if (IS_ERR(stm32_pcie->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->reset_gpio),
+				     "Failed to get reset GPIO\n");
+
+	ret = phy_set_mode(stm32_pcie->phy, PHY_MODE_PCIE);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, stm32_pcie);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable pm runtime %d\n", ret);
+		return ret;
+	}
+
+	stm32_pcie->perst_irq = gpiod_to_irq(stm32_pcie->reset_gpio);
+
+	/* Will be enabled in start_link when device is initialized. */
+	irq_set_status_flags(stm32_pcie->perst_irq, IRQ_NOAUTOEN);
+
+	ret = devm_request_threaded_irq(dev, stm32_pcie->perst_irq, NULL,
+					stm32_pcie_ep_perst_irq_thread,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					"perst_irq", stm32_pcie);
+	if (ret) {
+		dev_err(dev, "Failed to request PERST IRQ: %d\n", ret);
+		return ret;
+	}
+
+	return stm32_add_pcie_ep(stm32_pcie, pdev);
+}
+
+static void stm32_pcie_remove(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie = platform_get_drvdata(pdev);
+	struct dw_pcie_ep *ep = &stm32_pcie->pci->ep;
+
+	disable_irq(stm32_pcie->perst_irq);
+
+	dw_pcie_ep_deinit(ep);
+
+	stm32_pcie_disable_resources(stm32_pcie);
+
+	pm_runtime_put_sync(&pdev->dev);
+}
+
+static struct platform_driver stm32_pcie_ep_driver = {
+	.probe = stm32_pcie_probe,
+	.remove_new = stm32_pcie_remove,
+	.driver = {
+		.name = "stm32-ep-pcie",
+		.of_match_table = stm32_pcie_ep_of_match,
+	},
+};
+
+module_platform_driver(stm32_pcie_ep_driver);
+
+MODULE_AUTHOR("Christian Bruel <christian.bruel@foss.st.com>");
+MODULE_DESCRIPTION("STM32MP25 PCIe Endpoint Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, stm32_pcie_ep_of_match);
-- 
2.34.1



  parent reply	other threads:[~2024-11-12 16:36 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-12 16:19 [PATCH 0/5] Add STM32MP25 PCIe drivers Christian Bruel
2024-11-12 16:19 ` [PATCH 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings Christian Bruel
2024-11-12 18:28   ` Bjorn Helgaas
2024-11-15  8:27     ` Christian Bruel
2024-11-15 16:36   ` Rob Herring
2024-11-25 15:23     ` Christian Bruel
2024-11-12 16:19 ` [PATCH 2/5] PCI: stm32: Add PCIe host support for STM32MP25 Christian Bruel
2024-11-12 19:32   ` Bjorn Helgaas
2024-11-25 15:00     ` Christian Bruel
2024-11-12 16:19 ` [PATCH 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings Christian Bruel
2024-11-15 16:39   ` Rob Herring
2024-11-12 16:19 ` Christian Bruel [this message]
2024-11-12 20:38   ` [PATCH 4/5] PCI: stm32: Add PCIe endpoint support for STM32MP25 Bjorn Helgaas
2024-11-25 15:28     ` Christian Bruel
2024-11-12 16:19 ` [PATCH 5/5] MAINTAINERS: add entry for ST STM32MP25 PCIe drivers Christian Bruel
2024-11-12 20:39   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241112161925.999196-5-christian.bruel@foss.st.com \
    --to=christian.bruel@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=bhelgaas@google.com \
    --cc=cassel@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=krzk+dt@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=lpieralisi@kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=quic_schintav@quicinc.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox