From: Frank Li <Frank.Li@nxp.com>
To: "Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Arnd Bergmann" <arnd@arndb.de>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Anup Patel" <apatel@ventanamicro.com>,
"Marc Zyngier" <maz@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
imx@lists.linux.dev, Niklas Cassel <cassel@kernel.org>,
dlemoal@kernel.org, jdmason@kudzu.us,
linux-arm-kernel@lists.infradead.org,
Frank Li <Frank.Li@nxp.com>
Subject: [PATCH v10 6/7] misc: pci_endpoint_test: Add doorbell test case
Date: Wed, 04 Dec 2024 18:25:56 -0500 [thread overview]
Message-ID: <20241204-ep-msi-v10-6-87c378dbcd6d@nxp.com> (raw)
In-Reply-To: <20241204-ep-msi-v10-0-87c378dbcd6d@nxp.com>
Add three registers: PCIE_ENDPOINT_TEST_DB_BAR, PCIE_ENDPOINT_TEST_DB_ADDR,
and PCIE_ENDPOINT_TEST_DB_DATA.
Trigger the doorbell by writing data from PCI_ENDPOINT_TEST_DB_DATA to the
address provided by PCI_ENDPOINT_TEST_DB_OFFSET and wait for endpoint
feedback.
Add two command to COMMAND_ENABLE_DOORBELL and COMMAND_DISABLE_DOORBELL
to enable EP side's doorbell support and avoid compatible problem, which
host side driver miss-match with endpoint side function driver. See below
table:
Host side new driver Host side old driver
EP: new driver S F
EP: old driver F F
S: If EP side support MSI, 'pcitest -B' return success.
If EP side doesn't support MSI, the same to 'F'.
F: 'pcitest -B' return failure, other case as usual.
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v9 to v10
- none
Change from v8 to v9
- change PCITEST_DOORBELL to 0xa
Change form v6 to v8
- none
Change from v5 to v6
- %s/PCI_ENDPOINT_TEST_DB_ADDR/PCI_ENDPOINT_TEST_DB_OFFSET/g
Change from v4 to v5
- remove unused varible
- add irq_type at pci_endpoint_test_doorbell();
change from v3 to v4
- Add COMMAND_ENABLE_DOORBELL and COMMAND_DISABLE_DOORBELL.
- Remove new DID requirement.
---
drivers/misc/pci_endpoint_test.c | 80 ++++++++++++++++++++++++++++++++++++++++
include/uapi/linux/pcitest.h | 1 +
2 files changed, 81 insertions(+)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 3aaaf47fa4ee2..b3f36b6ba8ba2 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -42,6 +42,8 @@
#define COMMAND_READ BIT(3)
#define COMMAND_WRITE BIT(4)
#define COMMAND_COPY BIT(5)
+#define COMMAND_ENABLE_DOORBELL BIT(6)
+#define COMMAND_DISABLE_DOORBELL BIT(7)
#define PCI_ENDPOINT_TEST_STATUS 0x8
#define STATUS_READ_SUCCESS BIT(0)
@@ -53,6 +55,11 @@
#define STATUS_IRQ_RAISED BIT(6)
#define STATUS_SRC_ADDR_INVALID BIT(7)
#define STATUS_DST_ADDR_INVALID BIT(8)
+#define STATUS_DOORBELL_SUCCESS BIT(9)
+#define STATUS_DOORBELL_ENABLE_SUCCESS BIT(10)
+#define STATUS_DOORBELL_ENABLE_FAIL BIT(11)
+#define STATUS_DOORBELL_DISABLE_SUCCESS BIT(12)
+#define STATUS_DOORBELL_DISABLE_FAIL BIT(13)
#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0x0c
#define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR 0x10
@@ -67,6 +74,10 @@
#define PCI_ENDPOINT_TEST_IRQ_NUMBER 0x28
#define PCI_ENDPOINT_TEST_FLAGS 0x2c
+#define PCI_ENDPOINT_TEST_DB_BAR 0x30
+#define PCI_ENDPOINT_TEST_DB_OFFSET 0x34
+#define PCI_ENDPOINT_TEST_DB_DATA 0x38
+
#define FLAG_USE_DMA BIT(0)
#define PCI_DEVICE_ID_TI_AM654 0xb00c
@@ -108,6 +119,7 @@ enum pci_barno {
BAR_3,
BAR_4,
BAR_5,
+ NO_BAR = -1,
};
struct pci_endpoint_test {
@@ -746,6 +758,71 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
return false;
}
+static bool pci_endpoint_test_doorbell(struct pci_endpoint_test *test)
+{
+ struct pci_dev *pdev = test->pdev;
+ struct device *dev = &pdev->dev;
+ int irq_type = test->irq_type;
+ enum pci_barno bar;
+ u32 data, status;
+ u32 addr;
+
+ if (irq_type < IRQ_TYPE_INTX || irq_type > IRQ_TYPE_MSIX) {
+ dev_err(dev, "Invalid IRQ type option\n");
+ return false;
+ }
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+ COMMAND_ENABLE_DOORBELL);
+
+ wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
+
+ status = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+ if (status & STATUS_DOORBELL_ENABLE_FAIL) {
+ dev_err(dev, "Failed to enable doorbell\n");
+ return false;
+ }
+
+ data = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_DATA);
+ addr = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_OFFSET);
+ bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR);
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_STATUS, 0);
+
+ bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR);
+
+ writel(data, test->bar[bar] + addr);
+
+ wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
+
+ status = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+
+ if (!(status & STATUS_DOORBELL_SUCCESS))
+ dev_err(dev, "Endpoint have not received Doorbell\n");
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+ COMMAND_DISABLE_DOORBELL);
+
+ wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
+
+ status |= pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+
+ if (status & STATUS_DOORBELL_DISABLE_FAIL) {
+ dev_err(dev, "Failed to disable doorbell\n");
+ return false;
+ }
+
+ if (!(status & STATUS_DOORBELL_SUCCESS))
+ return false;
+
+ return true;
+}
+
static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
@@ -793,6 +870,9 @@ static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
case PCITEST_CLEAR_IRQ:
ret = pci_endpoint_test_clear_irq(test);
break;
+ case PCITEST_DOORBELL:
+ ret = pci_endpoint_test_doorbell(test);
+ break;
}
ret:
diff --git a/include/uapi/linux/pcitest.h b/include/uapi/linux/pcitest.h
index 94b46b043b536..b82e7f2ed937d 100644
--- a/include/uapi/linux/pcitest.h
+++ b/include/uapi/linux/pcitest.h
@@ -20,6 +20,7 @@
#define PCITEST_MSIX _IOW('P', 0x7, int)
#define PCITEST_SET_IRQTYPE _IOW('P', 0x8, int)
#define PCITEST_GET_IRQTYPE _IO('P', 0x9)
+#define PCITEST_DOORBELL _IO('P', 0xa)
#define PCITEST_CLEAR_IRQ _IO('P', 0x10)
#define PCITEST_FLAGS_USE_DMA 0x00000001
--
2.34.1
next prev parent reply other threads:[~2024-12-04 23:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-04 23:25 [PATCH v10 0/7] PCI: EP: Add RC-to-EP doorbell with platform MSI controller Frank Li
2024-12-04 23:25 ` [PATCH v10 1/7] irqchip/gic-v3-its: Avoid overwriting msi_prepare callback if provided by msi_domain_info Frank Li
2024-12-04 23:25 ` [PATCH v10 2/7] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller Frank Li
2024-12-04 23:25 ` [PATCH v10 3/7] PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check Frank Li
2024-12-05 13:10 ` Thomas Gleixner
2024-12-05 14:56 ` Frank Li
2024-12-05 18:05 ` Thomas Gleixner
2024-12-04 23:25 ` [PATCH v10 4/7] PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment Frank Li
2024-12-04 23:25 ` [PATCH v10 5/7] PCI: endpoint: pci-epf-test: Add doorbell test support Frank Li
2024-12-04 23:25 ` Frank Li [this message]
2024-12-04 23:25 ` [PATCH v10 7/7] tools: PCI: Add 'B' option for test doorbell Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241204-ep-msi-v10-6-87c378dbcd6d@nxp.com \
--to=frank.li@nxp.com \
--cc=apatel@ventanamicro.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=dlemoal@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=imx@lists.linux.dev \
--cc=jdmason@kudzu.us \
--cc=kishon@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=maz@kernel.org \
--cc=rafael@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox