[PATCH v2 00/11] RISC-V IMSIC driver improvements

[PATCH v2 00/11] RISC-V IMSIC driver improvements

[Anup Patel]

This series is based on recent discussion on LKML:
https://lore.kernel.org/lkml/20241114161845.502027-18-ajones@ventanamicro.com/

It primarily focuses on moving to RISC-V IMSIC driver use common MSI
lib and GENERIC_PENDING_IRQ.

PATCH1: Fix for handling non-atomic MSI updates
PATCH2 & PATCH3: Preparatory patches
PATCH4: Main patch which updates IMSIC driver to use MSI lib
PATCH5 & PATCH6: Preparatory patches for moving to GENERIC_PENDING_IRQ
PATCH7 to PATCH11: Patches use GENERIC_PENDING_IRQ in IMSIC driver

These patches can also be found in the riscv_imsic_imp_v2 branch at:
https://github.com/avpatel/linux.git

Changes since v1:
 - Changed series subject
 - Expand this series to use GENERIC_PENDING_IRQ in IMSIC driver

Andrew Jones (1):
  irqchip/riscv-imsic: Set irq_set_affinity for IMSIC base

Anup Patel (7):
  irqchip/riscv-imsic: Handle non-atomic MSI updates for device
  genirq: Introduce common irq_force_complete_move() implementation
  RISC-V: Enable GENERIC_PENDING_IRQ and GENERIC_PENDING_IRQ_CHIPFLAGS
  irqchip/riscv-imsic: Separate next and previous pointers in IMSIC
    vector
  irqchip/riscv-imsic: Implement irq_force_complete_move() for IMSIC
  irqchip/riscv-imsic: Replace hwirq with irq in the IMSIC vector
  irqchip/riscv-imsic: Use IRQCHIP_MOVE_DEFERRED flag for PCI devices

Thomas Gleixner (3):
  irqchip/irq-msi-lib: Optionally set default irq_eoi/irq_ack
  irqchip/riscv-imsic: Move to common MSI lib
  genirq: Introduce kconfig option GENERIC_PENDING_IRQ_CHIPFLAGS

 arch/riscv/Kconfig                         |   2 +
 drivers/irqchip/Kconfig                    |   8 +-
 drivers/irqchip/irq-gic-v2m.c              |   1 +
 drivers/irqchip/irq-imx-mu-msi.c           |   1 +
 drivers/irqchip/irq-msi-lib.c              |  11 +-
 drivers/irqchip/irq-mvebu-gicp.c           |   1 +
 drivers/irqchip/irq-mvebu-odmi.c           |   1 +
 drivers/irqchip/irq-mvebu-sei.c            |   1 +
 drivers/irqchip/irq-riscv-imsic-early.c    |  14 +-
 drivers/irqchip/irq-riscv-imsic-platform.c | 177 +++++++++------------
 drivers/irqchip/irq-riscv-imsic-state.c    | 110 +++++++++----
 drivers/irqchip/irq-riscv-imsic-state.h    |  12 +-
 include/linux/irq.h                        |  15 ++
 include/linux/msi.h                        |  11 ++
 kernel/irq/Kconfig                         |   4 +
 kernel/irq/chip.c                          |  39 ++++-
 kernel/irq/irqdomain.c                     |   1 +
 kernel/irq/migration.c                     |   9 ++
 18 files changed, 262 insertions(+), 156 deletions(-)

-- 
2.43.0

[PATCH v2 01/11] irqchip/riscv-imsic: Handle non-atomic MSI updates for device

[Anup Patel]

Device having non-atomic MSI update might see an intermediate
state when changing target IMSIC vector from one CPU to another.

To handle such intermediate device state, update MSI address
and MSI data through separate MSI writes to the device.

Fixes: 027e125acdba ("irqchip/riscv-imsic: Add device MSI domain support for platform devices")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-riscv-imsic-early.c    |  8 +++-
 drivers/irqchip/irq-riscv-imsic-platform.c | 27 ++++++++++++
 drivers/irqchip/irq-riscv-imsic-state.c    | 50 ++++++++++++++--------
 drivers/irqchip/irq-riscv-imsic-state.h    |  2 +-
 4 files changed, 68 insertions(+), 19 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-imsic-early.c b/drivers/irqchip/irq-riscv-imsic-early.c
index c5c2e6929a2f..73a93ce8668f 100644
--- a/drivers/irqchip/irq-riscv-imsic-early.c
+++ b/drivers/irqchip/irq-riscv-imsic-early.c
@@ -77,6 +77,12 @@ static void imsic_handle_irq(struct irq_desc *desc)
 	struct imsic_vector *vec;
 	unsigned long local_id;
 
+	/*
+	 * First process pending IMSIC vector enable, disable and movement
+	 * on the current CPU.
+	 */
+	imsic_local_sync_all(false);
+
 	chained_irq_enter(chip, desc);
 
 	while ((local_id = csr_swap(CSR_TOPEI, 0))) {
@@ -120,7 +126,7 @@ static int imsic_starting_cpu(unsigned int cpu)
 	 * Interrupts identities might have been enabled/disabled while
 	 * this CPU was not running so sync-up local enable/disable state.
 	 */
-	imsic_local_sync_all();
+	imsic_local_sync_all(true);
 
 	/* Enable local interrupt delivery */
 	imsic_local_delivery(true);
diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
index c708780e8760..b44eb0b3990b 100644
--- a/drivers/irqchip/irq-riscv-imsic-platform.c
+++ b/drivers/irqchip/irq-riscv-imsic-platform.c
@@ -97,6 +97,7 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
 {
 	struct imsic_vector *old_vec, *new_vec;
 	struct irq_data *pd = d->parent_data;
+	struct imsic_vector tmp_vec;
 
 	old_vec = irq_data_get_irq_chip_data(pd);
 	if (WARN_ON(!old_vec))
@@ -115,6 +116,32 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
 	if (!new_vec)
 		return -ENOSPC;
 
+	/*
+	 * Device having non-atomic MSI update might see an intermediate
+	 * state when changing target IMSIC vector from one CPU to another.
+	 *
+	 * To avoid losing interrupt to some intermediate state, do the
+	 * following (just like x86 APIC):
+	 *
+	 * 1) First write a temporary IMSIC vector to the device which
+	 * has MSI address same as the old IMSIC vector but MSI data
+	 * matches the new IMSIC vector.
+	 *
+	 * 2) Next write the new IMSIC vector to the device.
+	 *
+	 * Based on the above, the __imsic_local_sync() must check both
+	 * old MSI data and new MSI data on the old CPU for pending
+	 */
+
+	if (new_vec->local_id != old_vec->local_id) {
+		/* Setup temporary vector */
+		tmp_vec.cpu = old_vec->cpu;
+		tmp_vec.local_id = new_vec->local_id;
+
+		/* Point device to the temporary vector */
+		imsic_msi_update_msg(d, &tmp_vec);
+	}
+
 	/* Point device to the new vector */
 	imsic_msi_update_msg(d, new_vec);
 
diff --git a/drivers/irqchip/irq-riscv-imsic-state.c b/drivers/irqchip/irq-riscv-imsic-state.c
index b97e6cd89ed7..a8645084bd8f 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.c
+++ b/drivers/irqchip/irq-riscv-imsic-state.c
@@ -126,21 +126,21 @@ void __imsic_eix_update(unsigned long base_id, unsigned long num_id, bool pend,
 
 static void __imsic_local_sync(struct imsic_local_priv *lpriv)
 {
-	struct imsic_local_config *mlocal;
-	struct imsic_vector *vec, *mvec;
+	struct imsic_local_config *tlocal, *mlocal;
+	struct imsic_vector *vec, *tvec, *mvec;
 	int i;
 
 	lockdep_assert_held(&lpriv->lock);
 
 	for_each_set_bit(i, lpriv->dirty_bitmap, imsic->global.nr_ids + 1) {
 		if (!i || i == IMSIC_IPI_ID)
-			goto skip;
+			continue;
 		vec = &lpriv->vectors[i];
 
 		if (READ_ONCE(vec->enable))
-			__imsic_id_set_enable(i);
+			__imsic_id_set_enable(vec->local_id);
 		else
-			__imsic_id_clear_enable(i);
+			__imsic_id_clear_enable(vec->local_id);
 
 		/*
 		 * If the ID was being moved to a new ID on some other CPU
@@ -151,26 +151,47 @@ static void __imsic_local_sync(struct imsic_local_priv *lpriv)
 		mvec = READ_ONCE(vec->move);
 		WRITE_ONCE(vec->move, NULL);
 		if (mvec && mvec != vec) {
-			if (__imsic_id_read_clear_pending(i)) {
+			/*
+			 * Device having non-atomic MSI update might see an
+			 * intermediate state so check both old ID and new ID
+			 * for pending interrupts.
+			 *
+			 * For details, refer imsic_irq_set_affinity().
+			 */
+
+			tvec = vec->local_id == mvec->local_id ?
+			       NULL : &lpriv->vectors[mvec->local_id];
+			if (tvec && __imsic_id_read_clear_pending(tvec->local_id)) {
+				/* Retrigger temporary vector if it was already in-use */
+				if (READ_ONCE(tvec->enable)) {
+					tlocal = per_cpu_ptr(imsic->global.local, tvec->cpu);
+					writel_relaxed(tvec->local_id, tlocal->msi_va);
+				}
+
 				mlocal = per_cpu_ptr(imsic->global.local, mvec->cpu);
 				writel_relaxed(mvec->local_id, mlocal->msi_va);
 			}
 
-			imsic_vector_free(&lpriv->vectors[i]);
+			if (__imsic_id_read_clear_pending(vec->local_id)) {
+				mlocal = per_cpu_ptr(imsic->global.local, mvec->cpu);
+				writel_relaxed(mvec->local_id, mlocal->msi_va);
+			}
+
+			imsic_vector_free(vec);
 		}
 
-skip:
-		bitmap_clear(lpriv->dirty_bitmap, i, 1);
+		bitmap_clear(lpriv->dirty_bitmap, vec->local_id, 1);
 	}
 }
 
-void imsic_local_sync_all(void)
+void imsic_local_sync_all(bool force_all)
 {
 	struct imsic_local_priv *lpriv = this_cpu_ptr(imsic->lpriv);
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&lpriv->lock, flags);
-	bitmap_fill(lpriv->dirty_bitmap, imsic->global.nr_ids + 1);
+	if (force_all)
+		bitmap_fill(lpriv->dirty_bitmap, imsic->global.nr_ids + 1);
 	__imsic_local_sync(lpriv);
 	raw_spin_unlock_irqrestore(&lpriv->lock, flags);
 }
@@ -190,12 +211,7 @@ void imsic_local_delivery(bool enable)
 #ifdef CONFIG_SMP
 static void imsic_local_timer_callback(struct timer_list *timer)
 {
-	struct imsic_local_priv *lpriv = this_cpu_ptr(imsic->lpriv);
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&lpriv->lock, flags);
-	__imsic_local_sync(lpriv);
-	raw_spin_unlock_irqrestore(&lpriv->lock, flags);
+	imsic_local_sync_all(false);
 }
 
 static void __imsic_remote_sync(struct imsic_local_priv *lpriv, unsigned int cpu)
diff --git a/drivers/irqchip/irq-riscv-imsic-state.h b/drivers/irqchip/irq-riscv-imsic-state.h
index 391e44280827..8fae6c99b019 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.h
+++ b/drivers/irqchip/irq-riscv-imsic-state.h
@@ -74,7 +74,7 @@ static inline void __imsic_id_clear_enable(unsigned long id)
 	__imsic_eix_update(id, 1, false, false);
 }
 
-void imsic_local_sync_all(void);
+void imsic_local_sync_all(bool force_all);
 void imsic_local_delivery(bool enable);
 
 void imsic_vector_mask(struct imsic_vector *vec);
-- 
2.43.0

[PATCH v2 02/11] irqchip/irq-msi-lib: Optionally set default irq_eoi/irq_ack

[Anup Patel]

From: Thomas Gleixner <tglx@linutronix.de>

Introduce chip_flags in struct msi_parent_ops. This allows
msi_lib_init_dev_msi_info() set default irq_eoi/irq_ack
callbacks only when the corresponding flags are set in
the chip_flags.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-gic-v2m.c    |  1 +
 drivers/irqchip/irq-imx-mu-msi.c |  1 +
 drivers/irqchip/irq-msi-lib.c    | 11 ++++++-----
 drivers/irqchip/irq-mvebu-gicp.c |  1 +
 drivers/irqchip/irq-mvebu-odmi.c |  1 +
 drivers/irqchip/irq-mvebu-sei.c  |  1 +
 include/linux/msi.h              | 11 +++++++++++
 7 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
index be35c5349986..1e3476c335ca 100644
--- a/drivers/irqchip/irq-gic-v2m.c
+++ b/drivers/irqchip/irq-gic-v2m.c
@@ -255,6 +255,7 @@ static void __init gicv2m_teardown(void)
 static struct msi_parent_ops gicv2m_msi_parent_ops = {
 	.supported_flags	= GICV2M_MSI_FLAGS_SUPPORTED,
 	.required_flags		= GICV2M_MSI_FLAGS_REQUIRED,
+	.chip_flags		= MSI_CHIP_FLAG_SET_EOI | MSI_CHIP_FLAG_SET_ACK,
 	.bus_select_token	= DOMAIN_BUS_NEXUS,
 	.bus_select_mask	= MATCH_PCI_MSI | MATCH_PLATFORM_MSI,
 	.prefix			= "GICv2m-",
diff --git a/drivers/irqchip/irq-imx-mu-msi.c b/drivers/irqchip/irq-imx-mu-msi.c
index 4342a21de1eb..69aacdfc8bef 100644
--- a/drivers/irqchip/irq-imx-mu-msi.c
+++ b/drivers/irqchip/irq-imx-mu-msi.c
@@ -214,6 +214,7 @@ static void imx_mu_msi_irq_handler(struct irq_desc *desc)
 static const struct msi_parent_ops imx_mu_msi_parent_ops = {
 	.supported_flags	= IMX_MU_MSI_FLAGS_SUPPORTED,
 	.required_flags		= IMX_MU_MSI_FLAGS_REQUIRED,
+	.chip_flags		= MSI_CHIP_FLAG_SET_EOI | MSI_CHIP_FLAG_SET_ACK,
 	.bus_select_token       = DOMAIN_BUS_NEXUS,
 	.bus_select_mask	= MATCH_PLATFORM_MSI,
 	.prefix			= "MU-MSI-",
diff --git a/drivers/irqchip/irq-msi-lib.c b/drivers/irqchip/irq-msi-lib.c
index d8e29fc0d406..51464c6257f3 100644
--- a/drivers/irqchip/irq-msi-lib.c
+++ b/drivers/irqchip/irq-msi-lib.c
@@ -28,6 +28,7 @@ bool msi_lib_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
 			       struct msi_domain_info *info)
 {
 	const struct msi_parent_ops *pops = real_parent->msi_parent_ops;
+	struct irq_chip *chip = info->chip;
 	u32 required_flags;
 
 	/* Parent ops available? */
@@ -92,10 +93,10 @@ bool msi_lib_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
 	info->flags			|= required_flags;
 
 	/* Chip updates for all child bus types */
-	if (!info->chip->irq_eoi)
-		info->chip->irq_eoi	= irq_chip_eoi_parent;
-	if (!info->chip->irq_ack)
-		info->chip->irq_ack	= irq_chip_ack_parent;
+	if (!chip->irq_eoi && (pops->chip_flags & MSI_CHIP_FLAG_SET_EOI))
+		chip->irq_eoi = irq_chip_eoi_parent;
+	if (!chip->irq_ack && (pops->chip_flags & MSI_CHIP_FLAG_SET_ACK))
+		chip->irq_ack = irq_chip_ack_parent;
 
 	/*
 	 * The device MSI domain can never have a set affinity callback. It
@@ -105,7 +106,7 @@ bool msi_lib_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
 	 * device MSI domain aside of mask/unmask which is provided e.g. by
 	 * PCI/MSI device domains.
 	 */
-	info->chip->irq_set_affinity	= msi_domain_set_affinity;
+	chip->irq_set_affinity = msi_domain_set_affinity;
 	return true;
 }
 EXPORT_SYMBOL_GPL(msi_lib_init_dev_msi_info);
diff --git a/drivers/irqchip/irq-mvebu-gicp.c b/drivers/irqchip/irq-mvebu-gicp.c
index 2b6183919ea4..d67f93f6d750 100644
--- a/drivers/irqchip/irq-mvebu-gicp.c
+++ b/drivers/irqchip/irq-mvebu-gicp.c
@@ -161,6 +161,7 @@ static const struct irq_domain_ops gicp_domain_ops = {
 static const struct msi_parent_ops gicp_msi_parent_ops = {
 	.supported_flags	= GICP_MSI_FLAGS_SUPPORTED,
 	.required_flags		= GICP_MSI_FLAGS_REQUIRED,
+	.chip_flags		= MSI_CHIP_FLAG_SET_EOI | MSI_CHIP_FLAG_SET_ACK,
 	.bus_select_token       = DOMAIN_BUS_GENERIC_MSI,
 	.bus_select_mask	= MATCH_PLATFORM_MSI,
 	.prefix			= "GICP-",
diff --git a/drivers/irqchip/irq-mvebu-odmi.c b/drivers/irqchip/irq-mvebu-odmi.c
index ff19bfd258dc..28f7e81df94f 100644
--- a/drivers/irqchip/irq-mvebu-odmi.c
+++ b/drivers/irqchip/irq-mvebu-odmi.c
@@ -157,6 +157,7 @@ static const struct irq_domain_ops odmi_domain_ops = {
 static const struct msi_parent_ops odmi_msi_parent_ops = {
 	.supported_flags	= ODMI_MSI_FLAGS_SUPPORTED,
 	.required_flags		= ODMI_MSI_FLAGS_REQUIRED,
+	.chip_flags		= MSI_CHIP_FLAG_SET_EOI | MSI_CHIP_FLAG_SET_ACK,
 	.bus_select_token	= DOMAIN_BUS_GENERIC_MSI,
 	.bus_select_mask	= MATCH_PLATFORM_MSI,
 	.prefix			= "ODMI-",
diff --git a/drivers/irqchip/irq-mvebu-sei.c b/drivers/irqchip/irq-mvebu-sei.c
index 065166ab5dbc..ebd4a9014e8d 100644
--- a/drivers/irqchip/irq-mvebu-sei.c
+++ b/drivers/irqchip/irq-mvebu-sei.c
@@ -356,6 +356,7 @@ static void mvebu_sei_reset(struct mvebu_sei *sei)
 static const struct msi_parent_ops sei_msi_parent_ops = {
 	.supported_flags	= SEI_MSI_FLAGS_SUPPORTED,
 	.required_flags		= SEI_MSI_FLAGS_REQUIRED,
+	.chip_flags		= MSI_CHIP_FLAG_SET_EOI | MSI_CHIP_FLAG_SET_ACK,
 	.bus_select_mask	= MATCH_PLATFORM_MSI,
 	.bus_select_token	= DOMAIN_BUS_GENERIC_MSI,
 	.prefix			= "SEI-",
diff --git a/include/linux/msi.h b/include/linux/msi.h
index b10093c4d00e..9abef442c146 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -558,11 +558,21 @@ enum {
 	MSI_FLAG_NO_AFFINITY		= (1 << 21),
 };
 
+/*
+ * Flags for msi_parent_ops::chip_flags
+ */
+enum {
+	MSI_CHIP_FLAG_SET_EOI		= (1 << 0),
+	MSI_CHIP_FLAG_SET_ACK		= (1 << 1),
+};
+
 /**
  * struct msi_parent_ops - MSI parent domain callbacks and configuration info
  *
  * @supported_flags:	Required: The supported MSI flags of the parent domain
  * @required_flags:	Optional: The required MSI flags of the parent MSI domain
+ * @chip_flags:		Optional: Select MSI chip callbacks to update with defaults
+ *			in msi_lib_init_dev_msi_info().
  * @bus_select_token:	Optional: The bus token of the real parent domain for
  *			irq_domain::select()
  * @bus_select_mask:	Optional: A mask of supported BUS_DOMAINs for
@@ -575,6 +585,7 @@ enum {
 struct msi_parent_ops {
 	u32		supported_flags;
 	u32		required_flags;
+	u32		chip_flags;
 	u32		bus_select_token;
 	u32		bus_select_mask;
 	const char	*prefix;
-- 
2.43.0

[PATCH v2 03/11] irqchip/riscv-imsic: Set irq_set_affinity for IMSIC base

[Anup Patel]

From: Andrew Jones <ajones@ventanamicro.com>

Instead of using imsic_irq_set_affinity() for leaf MSI domains,
use imsic_irq_set_affinity() for the non-leaf IMSIC base domain
and use irq_chip_set_affinity_parent() for leaf MSI domains.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-riscv-imsic-platform.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
index b44eb0b3990b..dc6f63f657e4 100644
--- a/drivers/irqchip/irq-riscv-imsic-platform.c
+++ b/drivers/irqchip/irq-riscv-imsic-platform.c
@@ -96,10 +96,9 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
 				  bool force)
 {
 	struct imsic_vector *old_vec, *new_vec;
-	struct irq_data *pd = d->parent_data;
 	struct imsic_vector tmp_vec;
 
-	old_vec = irq_data_get_irq_chip_data(pd);
+	old_vec = irq_data_get_irq_chip_data(d);
 	if (WARN_ON(!old_vec))
 		return -ENOENT;
 
@@ -139,17 +138,17 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
 		tmp_vec.local_id = new_vec->local_id;
 
 		/* Point device to the temporary vector */
-		imsic_msi_update_msg(d, &tmp_vec);
+		imsic_msi_update_msg(irq_get_irq_data(d->irq), &tmp_vec);
 	}
 
 	/* Point device to the new vector */
-	imsic_msi_update_msg(d, new_vec);
+	imsic_msi_update_msg(irq_get_irq_data(d->irq), new_vec);
 
 	/* Update irq descriptors with the new vector */
-	pd->chip_data = new_vec;
+	d->chip_data = new_vec;
 
-	/* Update effective affinity of parent irq data */
-	irq_data_update_effective_affinity(pd, cpumask_of(new_vec->cpu));
+	/* Update effective affinity */
+	irq_data_update_effective_affinity(d, cpumask_of(new_vec->cpu));
 
 	/* Move state of the old vector to the new vector */
 	imsic_vector_move(old_vec, new_vec);
@@ -162,6 +161,9 @@ static struct irq_chip imsic_irq_base_chip = {
 	.name			= "IMSIC",
 	.irq_mask		= imsic_irq_mask,
 	.irq_unmask		= imsic_irq_unmask,
+#ifdef CONFIG_SMP
+	.irq_set_affinity	= imsic_irq_set_affinity,
+#endif
 	.irq_retrigger		= imsic_irq_retrigger,
 	.irq_compose_msi_msg	= imsic_irq_compose_msg,
 	.flags			= IRQCHIP_SKIP_SET_WAKE |
@@ -272,7 +274,7 @@ static bool imsic_init_dev_msi_info(struct device *dev,
 		if (WARN_ON_ONCE(domain != real_parent))
 			return false;
 #ifdef CONFIG_SMP
-		info->chip->irq_set_affinity = imsic_irq_set_affinity;
+		info->chip->irq_set_affinity = irq_chip_set_affinity_parent;
 #endif
 		break;
 	default:
-- 
2.43.0

[PATCH v2 04/11] irqchip/riscv-imsic: Move to common MSI lib

[Anup Patel]

From: Thomas Gleixner <tglx@linutronix.de>

Simplify the leaf MSI domain handling in the RISC-V IMSIC driver by
using msi_lib_init_dev_msi_info() and msi_lib_irq_domain_select()
provided by common MSI lib.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/Kconfig                    |   8 +-
 drivers/irqchip/irq-riscv-imsic-platform.c | 114 +--------------------
 2 files changed, 6 insertions(+), 116 deletions(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 55d7122121e2..6b767b8c974f 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -587,13 +587,7 @@ config RISCV_IMSIC
 	select IRQ_DOMAIN_HIERARCHY
 	select GENERIC_IRQ_MATRIX_ALLOCATOR
 	select GENERIC_MSI_IRQ
-
-config RISCV_IMSIC_PCI
-	bool
-	depends on RISCV_IMSIC
-	depends on PCI
-	depends on PCI_MSI
-	default RISCV_IMSIC
+	select IRQ_MSI_LIB
 
 config SIFIVE_PLIC
 	bool
diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
index dc6f63f657e4..2fab20d2ce3e 100644
--- a/drivers/irqchip/irq-riscv-imsic-platform.c
+++ b/drivers/irqchip/irq-riscv-imsic-platform.c
@@ -20,6 +20,7 @@
 #include <linux/spinlock.h>
 #include <linux/smp.h>
 
+#include "irq-msi-lib.h"
 #include "irq-riscv-imsic-state.h"
 
 static bool imsic_cpu_page_phys(unsigned int cpu, unsigned int guest_index,
@@ -201,22 +202,6 @@ static void imsic_irq_domain_free(struct irq_domain *domain, unsigned int virq,
 	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
 }
 
-static int imsic_irq_domain_select(struct irq_domain *domain, struct irq_fwspec *fwspec,
-				   enum irq_domain_bus_token bus_token)
-{
-	const struct msi_parent_ops *ops = domain->msi_parent_ops;
-	u32 busmask = BIT(bus_token);
-
-	if (fwspec->fwnode != domain->fwnode || fwspec->param_count != 0)
-		return 0;
-
-	/* Handle pure domain searches */
-	if (bus_token == ops->bus_select_token)
-		return 1;
-
-	return !!(ops->bus_select_mask & busmask);
-}
-
 #ifdef CONFIG_GENERIC_IRQ_DEBUGFS
 static void imsic_irq_debug_show(struct seq_file *m, struct irq_domain *d,
 				 struct irq_data *irqd, int ind)
@@ -233,110 +218,21 @@ static void imsic_irq_debug_show(struct seq_file *m, struct irq_domain *d,
 static const struct irq_domain_ops imsic_base_domain_ops = {
 	.alloc		= imsic_irq_domain_alloc,
 	.free		= imsic_irq_domain_free,
-	.select		= imsic_irq_domain_select,
+	.select		= msi_lib_irq_domain_select,
 #ifdef CONFIG_GENERIC_IRQ_DEBUGFS
 	.debug_show	= imsic_irq_debug_show,
 #endif
 };
 
-#ifdef CONFIG_RISCV_IMSIC_PCI
-
-static void imsic_pci_mask_irq(struct irq_data *d)
-{
-	pci_msi_mask_irq(d);
-	irq_chip_mask_parent(d);
-}
-
-static void imsic_pci_unmask_irq(struct irq_data *d)
-{
-	irq_chip_unmask_parent(d);
-	pci_msi_unmask_irq(d);
-}
-
-#define MATCH_PCI_MSI		BIT(DOMAIN_BUS_PCI_MSI)
-
-#else
-
-#define MATCH_PCI_MSI		0
-
-#endif
-
-static bool imsic_init_dev_msi_info(struct device *dev,
-				    struct irq_domain *domain,
-				    struct irq_domain *real_parent,
-				    struct msi_domain_info *info)
-{
-	const struct msi_parent_ops *pops = real_parent->msi_parent_ops;
-
-	/* MSI parent domain specific settings */
-	switch (real_parent->bus_token) {
-	case DOMAIN_BUS_NEXUS:
-		if (WARN_ON_ONCE(domain != real_parent))
-			return false;
-#ifdef CONFIG_SMP
-		info->chip->irq_set_affinity = irq_chip_set_affinity_parent;
-#endif
-		break;
-	default:
-		WARN_ON_ONCE(1);
-		return false;
-	}
-
-	/* Is the target supported? */
-	switch (info->bus_token) {
-#ifdef CONFIG_RISCV_IMSIC_PCI
-	case DOMAIN_BUS_PCI_DEVICE_MSI:
-	case DOMAIN_BUS_PCI_DEVICE_MSIX:
-		info->chip->irq_mask = imsic_pci_mask_irq;
-		info->chip->irq_unmask = imsic_pci_unmask_irq;
-		break;
-#endif
-	case DOMAIN_BUS_DEVICE_MSI:
-		/*
-		 * Per-device MSI should never have any MSI feature bits
-		 * set. It's sole purpose is to create a dumb interrupt
-		 * chip which has a device specific irq_write_msi_msg()
-		 * callback.
-		 */
-		if (WARN_ON_ONCE(info->flags))
-			return false;
-
-		/* Core managed MSI descriptors */
-		info->flags |= MSI_FLAG_ALLOC_SIMPLE_MSI_DESCS |
-			       MSI_FLAG_FREE_MSI_DESCS;
-		break;
-	case DOMAIN_BUS_WIRED_TO_MSI:
-		break;
-	default:
-		WARN_ON_ONCE(1);
-		return false;
-	}
-
-	/* Use hierarchial chip operations re-trigger */
-	info->chip->irq_retrigger = irq_chip_retrigger_hierarchy;
-
-	/*
-	 * Mask out the domain specific MSI feature flags which are not
-	 * supported by the real parent.
-	 */
-	info->flags &= pops->supported_flags;
-
-	/* Enforce the required flags */
-	info->flags |= pops->required_flags;
-
-	return true;
-}
-
-#define MATCH_PLATFORM_MSI		BIT(DOMAIN_BUS_PLATFORM_MSI)
-
 static const struct msi_parent_ops imsic_msi_parent_ops = {
 	.supported_flags	= MSI_GENERIC_FLAGS_MASK |
 				  MSI_FLAG_PCI_MSIX,
 	.required_flags		= MSI_FLAG_USE_DEF_DOM_OPS |
-				  MSI_FLAG_USE_DEF_CHIP_OPS,
+				  MSI_FLAG_USE_DEF_CHIP_OPS |
+				  MSI_FLAG_PCI_MSI_MASK_PARENT,
 	.bus_select_token	= DOMAIN_BUS_NEXUS,
 	.bus_select_mask	= MATCH_PCI_MSI | MATCH_PLATFORM_MSI,
-	.init_dev_msi_info	= imsic_init_dev_msi_info,
+	.init_dev_msi_info	= msi_lib_init_dev_msi_info,
 };
 
 int imsic_irqdomain_init(void)
-- 
2.43.0

[PATCH v2 05/11] genirq: Introduce kconfig option GENERIC_PENDING_IRQ_CHIPFLAGS

[Anup Patel]

From: Thomas Gleixner <tglx@linutronix.de>

Introduce kconfig option GENERIC_PENDING_IRQ_CHIPFLAGS which allows
irq core to set IRQD_MOVE_PCNTXT flag based on IRQCHIP_MOVE_DEFERRED
flag.

This kconfig option will help architectures such as x86 and RISC-V
to mark top-level irqchip instances where irqs can't be moved in
the process context.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 include/linux/irq.h    | 10 ++++++++++
 kernel/irq/Kconfig     |  4 ++++
 kernel/irq/chip.c      | 39 ++++++++++++++++++++++++++++++++++++---
 kernel/irq/irqdomain.c |  1 +
 4 files changed, 51 insertions(+), 3 deletions(-)

diff --git a/include/linux/irq.h b/include/linux/irq.h
index fa711f80957b..b689c8fe8d60 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -567,6 +567,7 @@ struct irq_chip {
  *                                    in the suspend path if they are in disabled state
  * IRQCHIP_AFFINITY_PRE_STARTUP:      Default affinity update before startup
  * IRQCHIP_IMMUTABLE:		      Don't ever change anything in this chip
+ * IRQCHIP_MOVE_DEFERRED:             Move the interrupt in actual interrupt context
  */
 enum {
 	IRQCHIP_SET_TYPE_MASKED			= (1 <<  0),
@@ -581,6 +582,7 @@ enum {
 	IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND	= (1 <<  9),
 	IRQCHIP_AFFINITY_PRE_STARTUP		= (1 << 10),
 	IRQCHIP_IMMUTABLE			= (1 << 11),
+	IRQCHIP_MOVE_DEFERRED			= (1 << 12),
 };
 
 #include <linux/irqdesc.h>
@@ -634,6 +636,14 @@ static inline void irq_move_masked_irq(struct irq_data *data) { }
 static inline void irq_force_complete_move(struct irq_desc *desc) { }
 #endif
 
+#if defined(CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS)
+void irq_update_pcntxt_flag(unsigned int irq, const struct irq_chip *chip);
+#else
+static inline void irq_update_pcntxt_flag(unsigned int irq, const struct irq_chip *chip)
+{
+}
+#endif
+
 extern int no_irq_affinity;
 
 #ifdef CONFIG_HARDIRQS_SW_RESEND
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 529adb1f5859..6d85a47fbf41 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -31,6 +31,10 @@ config GENERIC_IRQ_EFFECTIVE_AFF_MASK
 config GENERIC_PENDING_IRQ
 	bool
 
+# Deduce delayed migration from top-level interrupt chip flags
+config GENERIC_PENDING_IRQ_CHIPFLAGS
+	bool
+
 # Support for generic irq migrating off cpu before the cpu is offline.
 config GENERIC_IRQ_MIGRATION
 	bool
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 271e9139de77..623959a24464 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -33,6 +33,33 @@ struct irqaction chained_action = {
 	.handler = bad_chained_irq,
 };
 
+#ifdef CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS
+static void __irq_update_pcntxt_flag(struct irq_desc *desc,
+				     const struct irq_chip *chip)
+{
+	if (chip) {
+		if (chip->flags & IRQCHIP_MOVE_DEFERRED)
+			irqd_clear(&desc->irq_data, IRQD_MOVE_PCNTXT);
+		else
+			irqd_set(&desc->irq_data, IRQD_MOVE_PCNTXT);
+	}
+}
+
+void irq_update_pcntxt_flag(unsigned int irq, const struct irq_chip *chip)
+{
+	unsigned long flags;
+	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
+
+	__irq_update_pcntxt_flag(desc, chip);
+	irq_put_desc_unlock(desc, flags);
+}
+#else
+static inline void __irq_update_pcntxt_flag(struct irq_desc *desc,
+					    const struct irq_chip *chip)
+{
+}
+#endif
+
 /**
  *	irq_set_chip - set the irq chip for an irq
  *	@irq:	irq number
@@ -47,6 +74,7 @@ int irq_set_chip(unsigned int irq, const struct irq_chip *chip)
 		return -EINVAL;
 
 	desc->irq_data.chip = (struct irq_chip *)(chip ?: &no_irq_chip);
+	__irq_update_pcntxt_flag(desc, chip);
 	irq_put_desc_unlock(desc, flags);
 	/*
 	 * For !CONFIG_SPARSE_IRQ make the irq show up in
@@ -1114,16 +1142,21 @@ void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set)
 	trigger = irqd_get_trigger_type(&desc->irq_data);
 
 	irqd_clear(&desc->irq_data, IRQD_NO_BALANCING | IRQD_PER_CPU |
-		   IRQD_TRIGGER_MASK | IRQD_LEVEL | IRQD_MOVE_PCNTXT);
+		   IRQD_TRIGGER_MASK | IRQD_LEVEL);
 	if (irq_settings_has_no_balance_set(desc))
 		irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
 	if (irq_settings_is_per_cpu(desc))
 		irqd_set(&desc->irq_data, IRQD_PER_CPU);
-	if (irq_settings_can_move_pcntxt(desc))
-		irqd_set(&desc->irq_data, IRQD_MOVE_PCNTXT);
 	if (irq_settings_is_level(desc))
 		irqd_set(&desc->irq_data, IRQD_LEVEL);
 
+	/* Keep this around until x86 is converted over */
+	if (!IS_ENABLED(CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS)) {
+		irqd_clear(&desc->irq_data, IRQD_MOVE_PCNTXT);
+		if (irq_settings_can_move_pcntxt(desc))
+			irqd_set(&desc->irq_data, IRQD_MOVE_PCNTXT);
+	}
+
 	tmp = irq_settings_get_trigger_mask(desc);
 	if (tmp != IRQ_TYPE_NONE)
 		trigger = tmp;
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index ec6d8e72d980..ec5fc1d8cebe 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -1508,6 +1508,7 @@ int irq_domain_set_hwirq_and_chip(struct irq_domain *domain, unsigned int virq,
 	irq_data->hwirq = hwirq;
 	irq_data->chip = (struct irq_chip *)(chip ? chip : &no_irq_chip);
 	irq_data->chip_data = chip_data;
+	irq_update_pcntxt_flag(virq, chip);
 
 	return 0;
 }
-- 
2.43.0

[PATCH v2 06/11] genirq: Introduce common irq_force_complete_move() implementation

[Anup Patel]

The GENERIC_PENDING_IRQ requires an arch specific implementation
of irq_force_complete_move(). At the moment, only x86 implements
this but for RISC-V the irq_force_complete_move() is only needed
when RISC-V IMSIC driver is in use and not needed otherwise.

To address the above, introduce common weak implementation of
the irq_force_complete_move() which lets irqchip do the actual
irq_force_complete_move().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 include/linux/irq.h    | 5 +++++
 kernel/irq/migration.c | 9 +++++++++
 2 files changed, 14 insertions(+)

diff --git a/include/linux/irq.h b/include/linux/irq.h
index b689c8fe8d60..509c0ee4ef38 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -496,6 +496,7 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
  * @ipi_send_mask:	send an IPI to destination cpus in cpumask
  * @irq_nmi_setup:	function called from core code before enabling an NMI
  * @irq_nmi_teardown:	function called from core code after disabling an NMI
+ * @irq_force_complete_move:	optional function to force complete pending irq move
  * @flags:		chip specific flags
  */
 struct irq_chip {
@@ -547,6 +548,10 @@ struct irq_chip {
 	int		(*irq_nmi_setup)(struct irq_data *data);
 	void		(*irq_nmi_teardown)(struct irq_data *data);
 
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
+	void		(*irq_force_complete_move)(struct irq_data *data);
+#endif
+
 	unsigned long	flags;
 };
 
diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c
index eb150afd671f..2920024475a3 100644
--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -5,6 +5,15 @@
 
 #include "internals.h"
 
+void __weak irq_force_complete_move(struct irq_desc *desc)
+{
+	struct irq_data *d = irq_desc_get_irq_data(desc);
+	struct irq_chip *chip = irq_data_get_irq_chip(d);
+
+	if (chip && chip->irq_force_complete_move)
+		chip->irq_force_complete_move(d);
+}
+
 /**
  * irq_fixup_move_pending - Cleanup irq move pending from a dying CPU
  * @desc:		Interrupt descriptor to clean up
-- 
2.43.0

[PATCH v2 07/11] RISC-V: Enable GENERIC_PENDING_IRQ and GENERIC_PENDING_IRQ_CHIPFLAGS

[Anup Patel]

Enable GENERIC_PENDING_IRQ and GENERIC_PENDING_IRQ_CHIPFLAGS for RISC-V
so that RISC-V irqchips can support delayed irq mirgration in the
interrupt context.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index d4a7ca0388c0..adc878f029fb 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -110,6 +110,8 @@ config RISCV
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
+	select GENERIC_PENDING_IRQ if SMP
+	select GENERIC_PENDING_IRQ_CHIPFLAGS if SMP
 	select GENERIC_PCI_IOMAP
 	select GENERIC_PTDUMP if MMU
 	select GENERIC_SCHED_CLOCK
-- 
2.43.0

[PATCH v2 08/11] irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector

[Anup Patel]

Currently, there is only one "move" pointer in the struct imsic_vector
so during vector movement the old vector points to the new vector and
new vector points to itself.

To support force cleanup of old vector, add separate "move_next" and
"move_prev" pointers in the struct imsic_vector where during vector
movement the "move_next" pointer of the old vector points to the
new vector and the "move_prev" pointer of the new vector points to
the old vector. Both "move_next" pointers are cleared separately
by __imsic_local_sync() on the old and new CPUs respectively.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-riscv-imsic-state.c | 60 +++++++++++++++++++------
 drivers/irqchip/irq-riscv-imsic-state.h |  5 ++-
 2 files changed, 50 insertions(+), 15 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-imsic-state.c b/drivers/irqchip/irq-riscv-imsic-state.c
index a8645084bd8f..da49a160ea09 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.c
+++ b/drivers/irqchip/irq-riscv-imsic-state.c
@@ -124,10 +124,11 @@ void __imsic_eix_update(unsigned long base_id, unsigned long num_id, bool pend,
 	}
 }
 
-static void __imsic_local_sync(struct imsic_local_priv *lpriv)
+static bool __imsic_local_sync(struct imsic_local_priv *lpriv)
 {
 	struct imsic_local_config *tlocal, *mlocal;
 	struct imsic_vector *vec, *tvec, *mvec;
+	bool ret = true;
 	int i;
 
 	lockdep_assert_held(&lpriv->lock);
@@ -142,15 +143,33 @@ static void __imsic_local_sync(struct imsic_local_priv *lpriv)
 		else
 			__imsic_id_clear_enable(vec->local_id);
 
+		/*
+		 * If the ID was being moved from an existing ID on some
+		 * other CPU then we clear the pervious vector pointer
+		 * only after the movement is complete.
+		 */
+		mvec = READ_ONCE(vec->move_prev);
+		if (mvec) {
+			/*
+			 * If the old IMSIC vector has not been updated then
+			 * try again in the next sync-up call.
+			 */
+			if (READ_ONCE(mvec->move_next)) {
+				ret = false;
+				continue;
+			}
+
+			WRITE_ONCE(vec->move_prev, NULL);
+		}
+
 		/*
 		 * If the ID was being moved to a new ID on some other CPU
 		 * then we can get a MSI during the movement so check the
 		 * ID pending bit and re-trigger the new ID on other CPU
 		 * using MMIO write.
 		 */
-		mvec = READ_ONCE(vec->move);
-		WRITE_ONCE(vec->move, NULL);
-		if (mvec && mvec != vec) {
+		mvec = READ_ONCE(vec->move_next);
+		if (mvec) {
 			/*
 			 * Device having non-atomic MSI update might see an
 			 * intermediate state so check both old ID and new ID
@@ -177,11 +196,14 @@ static void __imsic_local_sync(struct imsic_local_priv *lpriv)
 				writel_relaxed(mvec->local_id, mlocal->msi_va);
 			}
 
+			WRITE_ONCE(vec->move_next, NULL);
 			imsic_vector_free(vec);
 		}
 
 		bitmap_clear(lpriv->dirty_bitmap, vec->local_id, 1);
 	}
+
+	return ret;
 }
 
 void imsic_local_sync_all(bool force_all)
@@ -190,9 +212,16 @@ void imsic_local_sync_all(bool force_all)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&lpriv->lock, flags);
+
 	if (force_all)
 		bitmap_fill(lpriv->dirty_bitmap, imsic->global.nr_ids + 1);
-	__imsic_local_sync(lpriv);
+	if (!__imsic_local_sync(lpriv)) {
+		if (!timer_pending(&lpriv->timer)) {
+			lpriv->timer.expires = jiffies + 1;
+			add_timer_on(&lpriv->timer, smp_processor_id());
+		}
+	}
+
 	raw_spin_unlock_irqrestore(&lpriv->lock, flags);
 }
 
@@ -232,8 +261,8 @@ static void __imsic_remote_sync(struct imsic_local_priv *lpriv, unsigned int cpu
 	 */
 	if (cpu_online(cpu)) {
 		if (cpu == smp_processor_id()) {
-			__imsic_local_sync(lpriv);
-			return;
+			if (__imsic_local_sync(lpriv))
+				return;
 		}
 
 		if (!timer_pending(&lpriv->timer)) {
@@ -294,8 +323,9 @@ void imsic_vector_unmask(struct imsic_vector *vec)
 	raw_spin_unlock(&lpriv->lock);
 }
 
-static bool imsic_vector_move_update(struct imsic_local_priv *lpriv, struct imsic_vector *vec,
-				     bool new_enable, struct imsic_vector *new_move)
+static bool imsic_vector_move_update(struct imsic_local_priv *lpriv,
+				     struct imsic_vector *vec, bool is_old_vec,
+				     bool new_enable, struct imsic_vector *move_vec)
 {
 	unsigned long flags;
 	bool enabled;
@@ -305,7 +335,10 @@ static bool imsic_vector_move_update(struct imsic_local_priv *lpriv, struct imsi
 	/* Update enable and move details */
 	enabled = READ_ONCE(vec->enable);
 	WRITE_ONCE(vec->enable, new_enable);
-	WRITE_ONCE(vec->move, new_move);
+	if (is_old_vec)
+		WRITE_ONCE(vec->move_next, move_vec);
+	else
+		WRITE_ONCE(vec->move_prev, move_vec);
 
 	/* Mark the vector as dirty and synchronize */
 	bitmap_set(lpriv->dirty_bitmap, vec->local_id, 1);
@@ -338,8 +371,8 @@ void imsic_vector_move(struct imsic_vector *old_vec, struct imsic_vector *new_ve
 	 * interrupt on the old vector while device was being moved
 	 * to the new vector.
 	 */
-	enabled = imsic_vector_move_update(old_lpriv, old_vec, false, new_vec);
-	imsic_vector_move_update(new_lpriv, new_vec, enabled, new_vec);
+	enabled = imsic_vector_move_update(old_lpriv, old_vec, true, false, new_vec);
+	imsic_vector_move_update(new_lpriv, new_vec, false, enabled, old_vec);
 }
 
 #ifdef CONFIG_GENERIC_IRQ_DEBUGFS
@@ -402,7 +435,8 @@ struct imsic_vector *imsic_vector_alloc(unsigned int hwirq, const struct cpumask
 	vec = &lpriv->vectors[local_id];
 	vec->hwirq = hwirq;
 	vec->enable = false;
-	vec->move = NULL;
+	vec->move_next = NULL;
+	vec->move_prev = NULL;
 
 	return vec;
 }
diff --git a/drivers/irqchip/irq-riscv-imsic-state.h b/drivers/irqchip/irq-riscv-imsic-state.h
index 8fae6c99b019..f02842b84ed5 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.h
+++ b/drivers/irqchip/irq-riscv-imsic-state.h
@@ -23,7 +23,8 @@ struct imsic_vector {
 	unsigned int				hwirq;
 	/* Details accessed using local lock held */
 	bool					enable;
-	struct imsic_vector			*move;
+	struct imsic_vector			*move_next;
+	struct imsic_vector			*move_prev;
 };
 
 struct imsic_local_priv {
@@ -87,7 +88,7 @@ static inline bool imsic_vector_isenabled(struct imsic_vector *vec)
 
 static inline struct imsic_vector *imsic_vector_get_move(struct imsic_vector *vec)
 {
-	return READ_ONCE(vec->move);
+	return READ_ONCE(vec->move_prev);
 }
 
 void imsic_vector_move(struct imsic_vector *old_vec, struct imsic_vector *new_vec);
-- 
2.43.0

[PATCH v2 09/11] irqchip/riscv-imsic: Implement irq_force_complete_move() for IMSIC

[Anup Patel]

Implement irq_force_complete_move() for IMSIC driver so that in-flight
vector movements on a CPU can be cleaned-up when the CPU goes down.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-riscv-imsic-platform.c | 32 ++++++++++++++++++++++
 drivers/irqchip/irq-riscv-imsic-state.c    | 17 ++++++++++++
 drivers/irqchip/irq-riscv-imsic-state.h    |  1 +
 3 files changed, 50 insertions(+)

diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
index 2fab20d2ce3e..fae47b8ccf73 100644
--- a/drivers/irqchip/irq-riscv-imsic-platform.c
+++ b/drivers/irqchip/irq-riscv-imsic-platform.c
@@ -156,6 +156,37 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
 
 	return IRQ_SET_MASK_OK_DONE;
 }
+
+static void imsic_irq_force_complete_move(struct irq_data *d)
+{
+	struct imsic_vector *mvec, *vec = irq_data_get_irq_chip_data(d);
+	unsigned int cpu = smp_processor_id();
+
+	if (WARN_ON(!vec))
+		return;
+
+	/* Do nothing if there is no in-flight move */
+	mvec = imsic_vector_get_move(vec);
+	if (!mvec)
+		return;
+
+	/* Do nothing if the old IMSIC vector does not belong to current CPU */
+	if (mvec->cpu != cpu)
+		return;
+
+	/*
+	 * The best we can do is force cleanup the old IMSIC vector.
+	 *
+	 * The challenges over here are same as x86 vector domain so
+	 * refer to the comments in irq_force_complete_move() function
+	 * implemented at arch/x86/kernel/apic/vector.c.
+	 */
+
+	/* Force cleanup in-flight move */
+	pr_info("IRQ fixup: irq %d move in progress, old vector cpu %d local_id %d\n",
+		d->irq, mvec->cpu, mvec->local_id);
+	imsic_vector_force_move_cleanup(vec);
+}
 #endif
 
 static struct irq_chip imsic_irq_base_chip = {
@@ -164,6 +195,7 @@ static struct irq_chip imsic_irq_base_chip = {
 	.irq_unmask		= imsic_irq_unmask,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	= imsic_irq_set_affinity,
+	.irq_force_complete_move = imsic_irq_force_complete_move,
 #endif
 	.irq_retrigger		= imsic_irq_retrigger,
 	.irq_compose_msi_msg	= imsic_irq_compose_msg,
diff --git a/drivers/irqchip/irq-riscv-imsic-state.c b/drivers/irqchip/irq-riscv-imsic-state.c
index da49a160ea09..c915a5cf4187 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.c
+++ b/drivers/irqchip/irq-riscv-imsic-state.c
@@ -323,6 +323,23 @@ void imsic_vector_unmask(struct imsic_vector *vec)
 	raw_spin_unlock(&lpriv->lock);
 }
 
+void imsic_vector_force_move_cleanup(struct imsic_vector *vec)
+{
+	struct imsic_local_priv *lpriv;
+	struct imsic_vector *mvec;
+	unsigned long flags;
+
+	lpriv = per_cpu_ptr(imsic->lpriv, vec->cpu);
+	raw_spin_lock_irqsave(&lpriv->lock, flags);
+
+	mvec = READ_ONCE(vec->move_prev);
+	WRITE_ONCE(vec->move_prev, NULL);
+	if (mvec)
+		imsic_vector_free(mvec);
+
+	raw_spin_unlock_irqrestore(&lpriv->lock, flags);
+}
+
 static bool imsic_vector_move_update(struct imsic_local_priv *lpriv,
 				     struct imsic_vector *vec, bool is_old_vec,
 				     bool new_enable, struct imsic_vector *move_vec)
diff --git a/drivers/irqchip/irq-riscv-imsic-state.h b/drivers/irqchip/irq-riscv-imsic-state.h
index f02842b84ed5..19dea0c77738 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.h
+++ b/drivers/irqchip/irq-riscv-imsic-state.h
@@ -91,6 +91,7 @@ static inline struct imsic_vector *imsic_vector_get_move(struct imsic_vector *ve
 	return READ_ONCE(vec->move_prev);
 }
 
+void imsic_vector_force_move_cleanup(struct imsic_vector *vec);
 void imsic_vector_move(struct imsic_vector *old_vec, struct imsic_vector *new_vec);
 
 struct imsic_vector *imsic_vector_from_local_id(unsigned int cpu, unsigned int local_id);
-- 
2.43.0

[PATCH v2 10/11] irqchip/riscv-imsic: Replace hwirq with irq in the IMSIC vector

[Anup Patel]

Currently, the imsic_handle_irq() uses generic_handle_domain_irq() to
handle the irq which internally has an extra step of resolving hwirq
using domain. This extra step can be avoided by replacing hwirq with
irq in the IMSIC vector and directly calling generic_handle_irq().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-riscv-imsic-early.c    | 6 ++----
 drivers/irqchip/irq-riscv-imsic-platform.c | 2 +-
 drivers/irqchip/irq-riscv-imsic-state.c    | 8 ++++----
 drivers/irqchip/irq-riscv-imsic-state.h    | 4 ++--
 4 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-imsic-early.c b/drivers/irqchip/irq-riscv-imsic-early.c
index 73a93ce8668f..0c94ce8ce580 100644
--- a/drivers/irqchip/irq-riscv-imsic-early.c
+++ b/drivers/irqchip/irq-riscv-imsic-early.c
@@ -73,7 +73,7 @@ static int __init imsic_ipi_domain_init(void) { return 0; }
 static void imsic_handle_irq(struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int err, cpu = smp_processor_id();
+	int cpu = smp_processor_id();
 	struct imsic_vector *vec;
 	unsigned long local_id;
 
@@ -103,9 +103,7 @@ static void imsic_handle_irq(struct irq_desc *desc)
 			continue;
 		}
 
-		err = generic_handle_domain_irq(imsic->base_domain, vec->hwirq);
-		if (unlikely(err))
-			pr_warn_ratelimited("hwirq 0x%x mapping not found\n", vec->hwirq);
+		generic_handle_irq(vec->irq);
 	}
 
 	chained_irq_exit(chip, desc);
diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
index fae47b8ccf73..e6c81718ba78 100644
--- a/drivers/irqchip/irq-riscv-imsic-platform.c
+++ b/drivers/irqchip/irq-riscv-imsic-platform.c
@@ -112,7 +112,7 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
 		return -EBUSY;
 
 	/* Get a new vector on the desired set of CPUs */
-	new_vec = imsic_vector_alloc(old_vec->hwirq, mask_val);
+	new_vec = imsic_vector_alloc(old_vec->irq, mask_val);
 	if (!new_vec)
 		return -ENOSPC;
 
diff --git a/drivers/irqchip/irq-riscv-imsic-state.c b/drivers/irqchip/irq-riscv-imsic-state.c
index c915a5cf4187..aca769d915bf 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.c
+++ b/drivers/irqchip/irq-riscv-imsic-state.c
@@ -434,7 +434,7 @@ struct imsic_vector *imsic_vector_from_local_id(unsigned int cpu, unsigned int l
 	return &lpriv->vectors[local_id];
 }
 
-struct imsic_vector *imsic_vector_alloc(unsigned int hwirq, const struct cpumask *mask)
+struct imsic_vector *imsic_vector_alloc(unsigned int irq, const struct cpumask *mask)
 {
 	struct imsic_vector *vec = NULL;
 	struct imsic_local_priv *lpriv;
@@ -450,7 +450,7 @@ struct imsic_vector *imsic_vector_alloc(unsigned int hwirq, const struct cpumask
 
 	lpriv = per_cpu_ptr(imsic->lpriv, cpu);
 	vec = &lpriv->vectors[local_id];
-	vec->hwirq = hwirq;
+	vec->irq = irq;
 	vec->enable = false;
 	vec->move_next = NULL;
 	vec->move_prev = NULL;
@@ -463,7 +463,7 @@ void imsic_vector_free(struct imsic_vector *vec)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&imsic->matrix_lock, flags);
-	vec->hwirq = UINT_MAX;
+	vec->irq = 0;
 	irq_matrix_free(imsic->matrix, vec->cpu, vec->local_id, false);
 	raw_spin_unlock_irqrestore(&imsic->matrix_lock, flags);
 }
@@ -522,7 +522,7 @@ static int __init imsic_local_init(void)
 			vec = &lpriv->vectors[i];
 			vec->cpu = cpu;
 			vec->local_id = i;
-			vec->hwirq = UINT_MAX;
+			vec->irq = 0;
 		}
 	}
 
diff --git a/drivers/irqchip/irq-riscv-imsic-state.h b/drivers/irqchip/irq-riscv-imsic-state.h
index 19dea0c77738..3202ffa4e849 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.h
+++ b/drivers/irqchip/irq-riscv-imsic-state.h
@@ -20,7 +20,7 @@ struct imsic_vector {
 	unsigned int				cpu;
 	unsigned int				local_id;
 	/* Details saved by driver in the vector */
-	unsigned int				hwirq;
+	unsigned int				irq;
 	/* Details accessed using local lock held */
 	bool					enable;
 	struct imsic_vector			*move_next;
@@ -96,7 +96,7 @@ void imsic_vector_move(struct imsic_vector *old_vec, struct imsic_vector *new_ve
 
 struct imsic_vector *imsic_vector_from_local_id(unsigned int cpu, unsigned int local_id);
 
-struct imsic_vector *imsic_vector_alloc(unsigned int hwirq, const struct cpumask *mask);
+struct imsic_vector *imsic_vector_alloc(unsigned int irq, const struct cpumask *mask);
 void imsic_vector_free(struct imsic_vector *vector);
 
 void imsic_vector_debug_show(struct seq_file *m, struct imsic_vector *vec, int ind);
-- 
2.43.0

[PATCH v2 11/11] irqchip/riscv-imsic: Use IRQCHIP_MOVE_DEFERRED flag for PCI devices

[Anup Patel]

Devices (such as PCI) which have non-atomic MSI update should
migrate irq in the interrupt-context so use IRQCHIP_MOVE_DEFERRED
flag for corresponding irqchips.

The use of IRQCHIP_MOVE_DEFERRED further simplifies IMSIC vector
movement as follows:

1) No need to handle the intermediate state seen by devices with
   non-atomic MSI update because imsic_irq_set_affinity() is called
   in the interrupt-context with interrupt masked.
2) No need to check temporary vector when completing vector movement
   on the old CPU in __imsic_local_sync().
3) No need to call imsic_local_sync_all() from imsic_handle_irq()

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-riscv-imsic-platform.c | 74 ++++++++++++++--------
 drivers/irqchip/irq-riscv-imsic-state.c    | 25 +-------
 2 files changed, 50 insertions(+), 49 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
index e6c81718ba78..eac7f358bbba 100644
--- a/drivers/irqchip/irq-riscv-imsic-platform.c
+++ b/drivers/irqchip/irq-riscv-imsic-platform.c
@@ -64,6 +64,11 @@ static int imsic_irq_retrigger(struct irq_data *d)
 	return 0;
 }
 
+static void imsic_irq_ack(struct irq_data *d)
+{
+	irq_move_irq(d);
+}
+
 static void imsic_irq_compose_vector_msg(struct imsic_vector *vec, struct msi_msg *msg)
 {
 	phys_addr_t msi_addr;
@@ -97,7 +102,20 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
 				  bool force)
 {
 	struct imsic_vector *old_vec, *new_vec;
-	struct imsic_vector tmp_vec;
+
+	/*
+	 * Requirements for the downstream irqdomains (or devices):
+	 *
+	 * 1) Downstream irqdomains (or devices) with atomic MSI update can
+	 *    happily do imsic_irq_set_affinity() in the process-context on
+	 *    any CPU so the irqchip of such irqdomains must not set the
+	 *    IRQCHIP_MOVE_DEFERRED flag.
+	 *
+	 * 2) Downstream irqdomains (or devices) with non-atomic MSI update
+	 *    must do imsic_irq_set_affinity() in the interrupt-context upon
+	 *    next interrupt so the irqchip of such irqdomains must set the
+	 *    IRQCHIP_MOVE_DEFERRED flag.
+	 */
 
 	old_vec = irq_data_get_irq_chip_data(d);
 	if (WARN_ON(!old_vec))
@@ -117,31 +135,13 @@ static int imsic_irq_set_affinity(struct irq_data *d, const struct cpumask *mask
 		return -ENOSPC;
 
 	/*
-	 * Device having non-atomic MSI update might see an intermediate
-	 * state when changing target IMSIC vector from one CPU to another.
-	 *
-	 * To avoid losing interrupt to some intermediate state, do the
-	 * following (just like x86 APIC):
-	 *
-	 * 1) First write a temporary IMSIC vector to the device which
-	 * has MSI address same as the old IMSIC vector but MSI data
-	 * matches the new IMSIC vector.
-	 *
-	 * 2) Next write the new IMSIC vector to the device.
-	 *
-	 * Based on the above, the __imsic_local_sync() must check both
-	 * old MSI data and new MSI data on the old CPU for pending
+	 * Downstream irqdomains (or devices) with non-atomic MSI update
+	 * may see an intermediate state when changing target IMSIC vector
+	 * from one CPU to another but using the IRQCHIP_MOVE_DEFERRED
+	 * flag this is taken care because imsic_irq_set_affinity() is
+	 * called in the interrupt-context with interrupt masked.
 	 */
 
-	if (new_vec->local_id != old_vec->local_id) {
-		/* Setup temporary vector */
-		tmp_vec.cpu = old_vec->cpu;
-		tmp_vec.local_id = new_vec->local_id;
-
-		/* Point device to the temporary vector */
-		imsic_msi_update_msg(irq_get_irq_data(d->irq), &tmp_vec);
-	}
-
 	/* Point device to the new vector */
 	imsic_msi_update_msg(irq_get_irq_data(d->irq), new_vec);
 
@@ -198,6 +198,7 @@ static struct irq_chip imsic_irq_base_chip = {
 	.irq_force_complete_move = imsic_irq_force_complete_move,
 #endif
 	.irq_retrigger		= imsic_irq_retrigger,
+	.irq_ack		= imsic_irq_ack,
 	.irq_compose_msi_msg	= imsic_irq_compose_msg,
 	.flags			= IRQCHIP_SKIP_SET_WAKE |
 				  IRQCHIP_MASK_ON_SUSPEND,
@@ -217,7 +218,7 @@ static int imsic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
 		return -ENOSPC;
 
 	irq_domain_set_info(domain, virq, virq, &imsic_irq_base_chip, vec,
-			    handle_simple_irq, NULL, NULL);
+			    handle_edge_irq, NULL, NULL);
 	irq_set_noprobe(virq);
 	irq_set_affinity(virq, cpu_online_mask);
 	irq_data_update_effective_affinity(irq_get_irq_data(virq), cpumask_of(vec->cpu));
@@ -256,15 +257,36 @@ static const struct irq_domain_ops imsic_base_domain_ops = {
 #endif
 };
 
+static bool imsic_init_dev_msi_info(struct device *dev,
+				    struct irq_domain *domain,
+				    struct irq_domain *real_parent,
+				    struct msi_domain_info *info)
+{
+	if (!msi_lib_init_dev_msi_info(dev, domain, real_parent, info))
+		return false;
+
+	switch (info->bus_token) {
+	case DOMAIN_BUS_PCI_DEVICE_MSI:
+	case DOMAIN_BUS_PCI_DEVICE_MSIX:
+		info->chip->flags |= IRQCHIP_MOVE_DEFERRED;
+		break;
+	default:
+		break;
+	}
+
+	return true;
+}
+
 static const struct msi_parent_ops imsic_msi_parent_ops = {
 	.supported_flags	= MSI_GENERIC_FLAGS_MASK |
 				  MSI_FLAG_PCI_MSIX,
 	.required_flags		= MSI_FLAG_USE_DEF_DOM_OPS |
 				  MSI_FLAG_USE_DEF_CHIP_OPS |
 				  MSI_FLAG_PCI_MSI_MASK_PARENT,
+	.chip_flags		= MSI_CHIP_FLAG_SET_ACK,
 	.bus_select_token	= DOMAIN_BUS_NEXUS,
 	.bus_select_mask	= MATCH_PCI_MSI | MATCH_PLATFORM_MSI,
-	.init_dev_msi_info	= msi_lib_init_dev_msi_info,
+	.init_dev_msi_info	= imsic_init_dev_msi_info,
 };
 
 int imsic_irqdomain_init(void)
diff --git a/drivers/irqchip/irq-riscv-imsic-state.c b/drivers/irqchip/irq-riscv-imsic-state.c
index aca769d915bf..c7649fb6bbe6 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.c
+++ b/drivers/irqchip/irq-riscv-imsic-state.c
@@ -126,8 +126,8 @@ void __imsic_eix_update(unsigned long base_id, unsigned long num_id, bool pend,
 
 static bool __imsic_local_sync(struct imsic_local_priv *lpriv)
 {
-	struct imsic_local_config *tlocal, *mlocal;
-	struct imsic_vector *vec, *tvec, *mvec;
+	struct imsic_local_config *mlocal;
+	struct imsic_vector *vec, *mvec;
 	bool ret = true;
 	int i;
 
@@ -170,27 +170,6 @@ static bool __imsic_local_sync(struct imsic_local_priv *lpriv)
 		 */
 		mvec = READ_ONCE(vec->move_next);
 		if (mvec) {
-			/*
-			 * Device having non-atomic MSI update might see an
-			 * intermediate state so check both old ID and new ID
-			 * for pending interrupts.
-			 *
-			 * For details, refer imsic_irq_set_affinity().
-			 */
-
-			tvec = vec->local_id == mvec->local_id ?
-			       NULL : &lpriv->vectors[mvec->local_id];
-			if (tvec && __imsic_id_read_clear_pending(tvec->local_id)) {
-				/* Retrigger temporary vector if it was already in-use */
-				if (READ_ONCE(tvec->enable)) {
-					tlocal = per_cpu_ptr(imsic->global.local, tvec->cpu);
-					writel_relaxed(tvec->local_id, tlocal->msi_va);
-				}
-
-				mlocal = per_cpu_ptr(imsic->global.local, mvec->cpu);
-				writel_relaxed(mvec->local_id, mlocal->msi_va);
-			}
-
 			if (__imsic_id_read_clear_pending(vec->local_id)) {
 				mlocal = per_cpu_ptr(imsic->global.local, mvec->cpu);
 				writel_relaxed(mvec->local_id, mlocal->msi_va);
-- 
2.43.0

Re: [PATCH v2 00/11] RISC-V IMSIC driver improvements

[Thomas Gleixner]

Anup!

On Sat, Dec 14 2024 at 22:55, Anup Patel wrote:
> This series is based on recent discussion on LKML:
> https://lore.kernel.org/lkml/20241114161845.502027-18-ajones@ventanamicro.com/
>
> It primarily focuses on moving to RISC-V IMSIC driver use common MSI
> lib and GENERIC_PENDING_IRQ.

Can you please respin this series on top of rc1?

Thanks,

        tglx

Re: [PATCH v2 00/11] RISC-V IMSIC driver improvements

[Anup Patel]

On Mon, Feb 3, 2025 at 7:47 PM Thomas Gleixner <tglx@linutronix.de> wrote:
>
> Anup!
>
> On Sat, Dec 14 2024 at 22:55, Anup Patel wrote:
> > This series is based on recent discussion on LKML:
> > https://lore.kernel.org/lkml/20241114161845.502027-18-ajones@ventanamicro.com/
> >
> > It primarily focuses on moving to RISC-V IMSIC driver use common MSI
> > lib and GENERIC_PENDING_IRQ.
>
> Can you please respin this series on top of rc1?

Sure, I will rebase and send v3 tomorrow.

Thanks,
Anup