From: Damon Ding <damon.ding@rock-chips.com>
To: heiko@sntech.de
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
rfoss@kernel.org, vkoul@kernel.org,
sebastian.reichel@collabora.com,
cristian.ciocaltea@collabora.com, l.stach@pengutronix.de,
andy.yan@rock-chips.com, hjc@rock-chips.com,
algea.cao@rock-chips.com, kever.yang@rock-chips.com,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-phy@lists.infradead.org,
Damon Ding <damon.ding@rock-chips.com>
Subject: [PATCH v2 11/11] arm64: dts: rockchip: Add nodes related to eDP1 for RK3588
Date: Mon, 16 Dec 2024 11:12:25 +0800 [thread overview]
Message-ID: <20241216031225.3746-12-damon.ding@rock-chips.com> (raw)
In-Reply-To: <20241216031225.3746-1-damon.ding@rock-chips.com>
The related nodes are hdptxphy1_grf, hdptxphy1 and edp1. And the
aliases edp0 and edp1 are added to separate two independent eDP
devices.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
---
| 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
--git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
index 0ce0934ec6b7..17cc0b619744 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
@@ -7,6 +7,11 @@
#include "rk3588-extra-pinctrl.dtsi"
/ {
+ aliases {
+ edp0 = &edp0;
+ edp1 = &edp1;
+ };
+
usb_host1_xhci: usb@fc400000 {
compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
reg = <0x0 0xfc400000 0x0 0x400000>;
@@ -67,6 +72,11 @@ u2phy1_otg: otg-port {
};
};
+ hdptxphy1_grf: syscon@fd5e4000 {
+ compatible = "rockchip,rk3588-hdptxphy-grf", "syscon";
+ reg = <0x0 0xfd5e4000 0x0 0x100>;
+ };
+
i2s8_8ch: i2s@fddc8000 {
compatible = "rockchip,rk3588-i2s-tdm";
reg = <0x0 0xfddc8000 0x0 0x1000>;
@@ -135,6 +145,35 @@ i2s10_8ch: i2s@fde00000 {
status = "disabled";
};
+ edp1: edp@fded0000 {
+ compatible = "rockchip,rk3588-edp";
+ reg = <0x0 0xfded0000 0x0 0x1000>;
+ clocks = <&cru CLK_EDP1_24M>, <&cru PCLK_EDP1>, <&cru CLK_EDP1_200M>;
+ clock-names = "dp", "pclk", "spdif";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&hdptxphy1>;
+ phy-names = "dp";
+ power-domains = <&power RK3588_PD_VO1>;
+ resets = <&cru SRST_EDP1_24M>, <&cru SRST_P_EDP1>;
+ reset-names = "dp", "apb";
+ rockchip,grf = <&vo1_grf>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp1_in: port@0 {
+ reg = <0>;
+ };
+
+ edp1_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
pcie3x4: pcie@fe150000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
#address-cells = <3>;
@@ -395,6 +434,22 @@ sata-port@0 {
};
};
+ hdptxphy1: phy@fed70000 {
+ compatible = "rockchip,rk3588-hdptx-phy";
+ reg = <0x0 0xfed70000 0x0 0x2000>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX1>;
+ clock-names = "ref", "apb";
+ #phy-cells = <0>;
+ resets = <&cru SRST_HDPTX1>, <&cru SRST_P_HDPTX1>,
+ <&cru SRST_HDPTX1_INIT>, <&cru SRST_HDPTX1_CMN>,
+ <&cru SRST_HDPTX1_LANE>, <&cru SRST_HDPTX1_ROPLL>,
+ <&cru SRST_HDPTX1_LCPLL>;
+ reset-names = "phy", "apb", "init", "cmn", "lane", "ropll",
+ "lcpll";
+ rockchip,grf = <&hdptxphy1_grf>;
+ status = "disabled";
+ };
+
usbdp_phy1: phy@fed90000 {
compatible = "rockchip,rk3588-usbdp-phy";
reg = <0x0 0xfed90000 0x0 0x10000>;
--
2.34.1
next prev parent reply other threads:[~2024-12-16 3:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-16 3:12 [PATCH v2 00/11] Add eDP support for RK3588 Damon Ding
2024-12-16 3:12 ` [PATCH v2 01/11] drm/rockchip: analogix_dp: Use formalized struct definition for grf field Damon Ding
2024-12-16 3:12 ` [PATCH v2 02/11] dt-bindings: display: rockchip: analogix-dp: Add support for RK3588 Damon Ding
2024-12-16 3:12 ` [PATCH v2 03/11] drm/rockchip: analogix_dp: " Damon Ding
2024-12-16 8:57 ` Dmitry Baryshkov
2024-12-16 9:11 ` Heiko Stübner
2024-12-16 10:04 ` Dmitry Baryshkov
2024-12-16 10:09 ` Damon Ding
2024-12-16 3:12 ` [PATCH v2 04/11] phy: phy-rockchip-samsung-hdptx: Add support for eDP mode Damon Ding
2024-12-16 9:00 ` Dmitry Baryshkov
2024-12-16 10:06 ` Damon Ding
2024-12-18 12:35 ` Heiko Stübner
2024-12-19 1:35 ` Damon Ding
2024-12-16 3:12 ` [PATCH v2 05/11] drm/bridge: analogix_dp: add support for RK3588 Damon Ding
2024-12-16 3:12 ` [PATCH v2 06/11] drm/bridge: analogix_dp: Add support for phy configuration Damon Ding
2024-12-16 3:12 ` [PATCH v2 07/11] dt-bindings: display: rockchip: Fix label name of hdptxphy for RK3588 HDMI TX Controller Damon Ding
2024-12-16 3:12 ` [PATCH v2 08/11] arm64: dts: rockchip: Fix label name of hdptxphy for RK3588 Damon Ding
2024-12-16 3:12 ` [PATCH v2 09/11] arm64: dts: rockchip: Add eDP0 node " Damon Ding
2024-12-16 3:12 ` [PATCH v2 10/11] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board Damon Ding
2024-12-16 9:06 ` Dmitry Baryshkov
2024-12-16 10:15 ` Damon Ding
2024-12-16 3:12 ` Damon Ding [this message]
2024-12-18 12:45 ` [PATCH v2 11/11] arm64: dts: rockchip: Add nodes related to eDP1 for RK3588 Heiko Stübner
2024-12-19 1:27 ` Damon Ding
2024-12-16 16:29 ` [PATCH v2 00/11] Add eDP support " Rob Herring (Arm)
2024-12-17 2:32 ` Damon Ding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241216031225.3746-12-damon.ding@rock-chips.com \
--to=damon.ding@rock-chips.com \
--cc=algea.cao@rock-chips.com \
--cc=andy.yan@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=cristian.ciocaltea@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox