* [PATCH 1/7] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
2024-12-29 18:41 [PATCH v4 0/7] arm64: dts: rockchip: Orange Pi 5 Max board Jimmy Hon
@ 2024-12-29 18:41 ` Jimmy Hon
2024-12-29 19:20 ` Jimmy Hon
2024-12-29 18:41 ` [PATCH 2/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max Jimmy Hon
` (5 subsequent siblings)
6 siblings, 1 reply; 17+ messages in thread
From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw)
To: Heiko Stuebner
Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon
for Orange Pi 5 Plus/Max/Ultra and AI Max
---
.../dts/rockchip/rk3588-orangepi-5-plus.dts | 833 ++----------------
...gepi-5-plus.dts => rk3588-orangepi-5.dtsi} | 195 +---
2 files changed, 77 insertions(+), 951 deletions(-)
copy arch/arm64/boot/dts/rockchip/{rk3588-orangepi-5-plus.dts => rk3588-orangepi-5.dtsi} (80%)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index 9f5a38b290bf..fd49a7c8a381 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -6,86 +6,15 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
-#include "rk3588.dtsi"
+#include "rk3588-orangepi-5.dtsi"
/ {
model = "Xunlong Orange Pi 5 Plus";
compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588";
- aliases {
- mmc0 = &sdhci;
- mmc1 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- adc-keys-0 {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
- poll-interval = <100>;
-
- button-maskrom {
- label = "Mask Rom";
- linux,code = <KEY_SETUP>;
- press-threshold-microvolt = <2000>;
- };
- };
-
- adc-keys-1 {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
- poll-interval = <100>;
-
- button-recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <2000>;
- };
- };
-
- speaker_amp: speaker-audio-amplifier {
- compatible = "simple-audio-amplifier";
- enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
- sound-name-prefix = "Speaker Amp";
- };
-
- headphone_amp: headphones-audio-amplifier {
- compatible = "simple-audio-amplifier";
- enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
- sound-name-prefix = "Headphones Amp";
- };
-
- ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_receiver_pin>;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&blue_led_pin>;
-
- led {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <1>;
- gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
- };
- };
-
hdmi0-con {
compatible = "hdmi-connector";
type = "a";
@@ -97,24 +26,11 @@ hdmi0_con_in: endpoint {
};
};
- fan: pwm-fan {
- compatible = "pwm-fan";
- cooling-levels = <0 70 75 80 100>;
- fan-supply = <&vcc5v0_sys>;
- pwms = <&pwm3 0 50000 0>;
- #cooling-cells = <2>;
- };
-
- pwm-leds {
- compatible = "pwm-leds";
-
- led {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <2>;
- max-brightness = <255>;
- pwms = <&pwm2 0 25000 0>;
- };
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_receiver_pin>;
};
rfkill {
@@ -123,161 +39,62 @@ rfkill {
radio-type = "wlan";
shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
};
-
- sound {
- compatible = "simple-audio-card";
- pinctrl-names = "default";
- pinctrl-0 = <&hp_detect>;
- simple-audio-card,name = "Analog";
- simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
- simple-audio-card,bitclock-master = <&daicpu>;
- simple-audio-card,frame-master = <&daicpu>;
- /*TODO: SARADC_IN3 is used as MIC detection / key input */
-
- simple-audio-card,widgets =
- "Microphone", "Onboard Microphone",
- "Microphone", "Microphone Jack",
- "Speaker", "Speaker",
- "Headphone", "Headphones";
-
- simple-audio-card,routing =
- "Headphones", "LOUT1",
- "Headphones", "ROUT1",
- "Speaker", "LOUT2",
- "Speaker", "ROUT2",
-
- "Headphones", "Headphones Amp OUTL",
- "Headphones", "Headphones Amp OUTR",
- "Headphones Amp INL", "LOUT1",
- "Headphones Amp INR", "ROUT1",
-
- "Speaker", "Speaker Amp OUTL",
- "Speaker", "Speaker Amp OUTR",
- "Speaker Amp INL", "LOUT2",
- "Speaker Amp INR", "ROUT2",
-
- /* single ended signal to LINPUT1 */
- "LINPUT1", "Microphone Jack",
- "RINPUT1", "Microphone Jack",
- /* differential signal */
- "LINPUT2", "Onboard Microphone",
- "RINPUT2", "Onboard Microphone";
-
- daicpu: simple-audio-card,cpu {
- sound-dai = <&i2s0_8ch>;
- system-clock-frequency = <12288000>;
- };
-
- daicodec: simple-audio-card,codec {
- sound-dai = <&es8388>;
- system-clock-frequency = <12288000>;
- };
- };
-
- vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
- regulator-name = "vcc3v3_pcie30";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <5000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth {
- compatible = "regulator-fixed";
- gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
- regulator-name = "vcc3v3_pcie_eth";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <50000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_wf: regulator-vcc3v3-wf {
- compatible = "regulator-fixed";
- enable-active-high;
- gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
- regulator-name = "vcc3v3_wf";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <50000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_sys: regulator-vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vcc5v0_usb20: regulator-vcc5v0-usb20 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_usb20_en>;
- regulator-name = "vcc5v0_usb20";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_sys>;
- };
};
-&combphy0_ps {
+&speaker_amp {
+ enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
status = "okay";
};
-&combphy1_ps {
- status = "okay";
-};
-
-&combphy2_psu {
- status = "okay";
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_big0_s0>;
+&headphone_amp {
+ enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
};
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
- cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
- cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_lit_s0>;
+&analog_sound {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
+ simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
+ simple-audio-card,widgets =
+ "Microphone", "Onboard Microphone",
+ "Microphone", "Microphone Jack",
+ "Speaker", "Speaker",
+ "Headphone", "Headphones";
+
+ simple-audio-card,routing =
+ "Headphones", "LOUT1",
+ "Headphones", "ROUT1",
+ "Speaker", "LOUT2",
+ "Speaker", "ROUT2",
+
+ "Headphones", "Headphones Amp OUTL",
+ "Headphones", "Headphones Amp OUTR",
+ "Headphones Amp INL", "LOUT1",
+ "Headphones Amp INR", "ROUT1",
+
+ "Speaker", "Speaker Amp OUTL",
+ "Speaker", "Speaker Amp OUTR",
+ "Speaker Amp INL", "LOUT2",
+ "Speaker Amp INR", "ROUT2",
+
+ /* single ended signal to LINPUT1 */
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ /* differential signal */
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
};
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_lit_s0>;
+&combphy0_ps {
+ status = "okay";
};
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_lit_s0>;
+&combphy1_ps {
+ status = "okay";
};
-&gpu {
- mali-supply = <&vdd_gpu_s0>;
- status = "okay";
+&fan {
+ pwms = <&pwm3 0 50000 0>;
};
&hdmi0 {
@@ -300,128 +117,20 @@ &hdptxphy_hdmi0 {
status = "okay";
};
-&i2c0 {
+&hym8563 {
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&i2c0m2_xfer>;
- status = "okay";
-
- vdd_cpu_big0_s0: regulator@42 {
- compatible = "rockchip,rk8602";
- reg = <0x42>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big0_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1050000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_big1_s0: regulator@43 {
- compatible = "rockchip,rk8603", "rockchip,rk8602";
- reg = <0x43>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big1_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1050000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c6 {
- clock-frequency = <400000>;
- status = "okay";
-
- hym8563: rtc@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <0>;
- clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
- wakeup-source;
- };
+ pinctrl-0 = <&hym8563_int>;
};
-&i2c7 {
- status = "okay";
-
- /* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
- es8388: audio-codec@11 {
- compatible = "everest,es8388";
- reg = <0x11>;
- clocks = <&cru I2S0_8CH_MCLKOUT>;
- AVDD-supply = <&vcc_1v8_s0>;
- DVDD-supply = <&vcc_1v8_s0>;
- HPVDD-supply = <&vcc_3v3_s0>;
- PVDD-supply = <&vcc_3v3_s0>;
- assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
- assigned-clock-rates = <12288000>;
- #sound-dai-cells = <0>;
- };
-};
-
-&i2s0_8ch {
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_lrck
- &i2s0_mclk
- &i2s0_sclk
- &i2s0_sdi0
- &i2s0_sdo0>;
+&led_blue_gpio {
+ gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
-&i2s2_2ch {
- pinctrl-names = "default";
- pinctrl-0 = <&i2s2m0_lrck
- &i2s2m0_sclk
- &i2s2m0_sdi
- &i2s2m0_sdo>;
- status = "okay";
-};
-
-&package_thermal {
- polling-delay = <1000>;
-
- cooling-maps {
- map0 {
- trip = <&package_fan0>;
- cooling-device = <&fan THERMAL_NO_LIMIT 1>;
- };
-
- map1 {
- trip = <&package_fan1>;
- cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
- };
- };
-
- trips {
- package_fan0: package-fan0 {
- temperature = <55000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- package_fan1: package-fan1 {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "active";
- };
- };
+&led_green_pwm {
+ pwms = <&pwm2 0 25000 0>;
};
/* phy1 - M.KEY socket */
@@ -445,16 +154,6 @@ &pcie2x1l2 {
status = "okay";
};
-&pcie30phy {
- status = "okay";
-};
-
-&pcie3x4 {
- reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie30>;
- status = "okay";
-};
-
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
@@ -498,405 +197,13 @@ &pwm3 {
status = "okay";
};
-&saradc {
- vref-supply = <&vcc_1v8_s0>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- no-sdio;
- no-sd;
- non-removable;
- max-frequency = <200000000>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- no-sdio;
- no-mmc;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc_3v3_s3>;
- vqmmc-supply = <&vccio_sd_s0>;
+&recovery_button {
status = "okay";
};
&sfc {
pinctrl-names = "default";
pinctrl-0 = <&fspim1_pins>;
- status = "okay";
-
- spi_flash: flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <100000000>;
- spi-rx-bus-width = <4>;
- spi-tx-bus-width = <1>;
- };
-};
-
-&spi2 {
- assigned-clocks = <&cru CLK_SPI2>;
- assigned-clock-rates = <200000000>;
- num-cs = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
- status = "okay";
-
- pmic@0 {
- compatible = "rockchip,rk806";
- reg = <0x0>;
- interrupt-parent = <&gpio0>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
- <&rk806_dvs2_null>, <&rk806_dvs3_null>;
- spi-max-frequency = <1000000>;
- system-power-controller;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc5v0_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc_2v0_pldo_s3>;
- vcc12-supply = <&vcc5v0_sys>;
- vcc13-supply = <&vdd2_ddr_s3>;
- vcc14-supply = <&vdd2_ddr_s3>;
- vcca-supply = <&vcc5v0_sys>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- rk806_dvs1_null: dvs1-null-pins {
- pins = "gpio_pwrctrl1";
- function = "pin_fun0";
- };
-
- rk806_dvs2_null: dvs2-null-pins {
- pins = "gpio_pwrctrl2";
- function = "pin_fun0";
- };
-
- rk806_dvs3_null: dvs3-null-pins {
- pins = "gpio_pwrctrl3";
- function = "pin_fun0";
- };
-
- regulators {
- vdd_gpu_s0: dcdc-reg1 {
- regulator-name = "vdd_gpu_s0";
- regulator-boot-on;
- regulator-enable-ramp-delay = <400>;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_lit_s0: dcdc-reg2 {
- regulator-name = "vdd_cpu_lit_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_log_s0: dcdc-reg3 {
- regulator-name = "vdd_log_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <825000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <750000>;
- };
- };
-
- vdd_vdenc_s0: dcdc-reg4 {
- regulator-name = "vdd_vdenc_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <825000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_ddr_s0: dcdc-reg5 {
- regulator-name = "vdd_ddr_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <900000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <850000>;
- };
- };
-
- vdd2_ddr_s3: dcdc-reg6 {
- regulator-name = "vdd2_ddr_s3";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_2v0_pldo_s3: dcdc-reg7 {
- regulator-name = "vdd_2v0_pldo_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <2000000>;
- };
- };
-
- vcc_3v3_s3: dcdc-reg8 {
- regulator-name = "vcc_3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vddq_ddr_s0: dcdc-reg9 {
- regulator-name = "vddq_ddr_s0";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v8_s3: dcdc-reg10 {
- regulator-name = "vcc_1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- avcc_1v8_s0: pldo-reg1 {
- regulator-name = "avcc_1v8_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- /* shorted to avcc_1v8_s0 on the board */
- vcc_1v8_s0: pldo-reg2 {
- regulator-name = "vcc_1v8_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- avdd_1v2_s0: pldo-reg3 {
- regulator-name = "avdd_1v2_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v3_s0: pldo-reg4 {
- regulator-name = "vcc_3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_sd_s0: pldo-reg5 {
- regulator-name = "vccio_sd_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- pldo6_s3: pldo-reg6 {
- regulator-name = "pldo6_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_0v75_s3: nldo-reg1 {
- regulator-name = "vdd_0v75_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <750000>;
- };
- };
-
- vdd_ddr_pll_s0: nldo-reg2 {
- regulator-name = "vdd_ddr_pll_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <850000>;
- };
- };
-
- avdd_0v75_s0: nldo-reg3 {
- regulator-name = "avdd_0v75_s0";
- regulator-always-on;
- regulator-boot-on;
- /*
- * The schematic mentions that actual setting
- * should be 0.8375V. RK3588 datasheet specifies
- * maximum as 0.825V. So we set datasheet max
- * here.
- */
- regulator-min-microvolt = <825000>;
- regulator-max-microvolt = <825000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_0v85_s0: nldo-reg4 {
- regulator-name = "vdd_0v85_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_0v75_s0: nldo-reg5 {
- regulator-name = "vdd_0v75_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-};
-
-&tsadc {
- status = "okay";
-};
-
-&u2phy2 {
- status = "okay";
-};
-
-&u2phy3 {
- status = "okay";
-};
-
-&u2phy2_host {
- phy-supply = <&vcc5v0_usb20>;
- status = "okay";
-};
-
-&u2phy3_host {
- phy-supply = <&vcc5v0_usb20>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-0 = <&uart2m0_xfer>;
- status = "okay";
};
&uart9 {
@@ -904,28 +211,18 @@ &uart9 {
status = "okay";
};
-&usb_host0_ehci {
- status = "okay";
+&vcc3v3_pcie_eth {
+ gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
};
-&usb_host0_ohci {
+&vcc3v3_wf {
status = "okay";
};
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&vop_mmu {
- status = "okay";
-};
-
-&vop {
- status = "okay";
+&vcc5v0_usb20 {
+ gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb20_en>;
};
&vp0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
similarity index 80%
copy from arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
copy to arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
index 9f5a38b290bf..d72afd368d8b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
@@ -9,14 +9,10 @@
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588.dtsi"
/ {
- model = "Xunlong Orange Pi 5 Plus";
- compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588";
-
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
@@ -40,12 +36,13 @@ button-maskrom {
};
};
- adc-keys-1 {
+ recovery_button: adc-keys-1 {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
+ status = "disabled";
button-recovery {
label = "Recovery";
@@ -56,44 +53,23 @@ button-recovery {
speaker_amp: speaker-audio-amplifier {
compatible = "simple-audio-amplifier";
- enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Speaker Amp";
+ status = "disabled";
};
headphone_amp: headphones-audio-amplifier {
compatible = "simple-audio-amplifier";
- enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Headphones Amp";
};
- ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_receiver_pin>;
- };
-
gpio-leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&blue_led_pin>;
- led {
+ led_blue_gpio: led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <1>;
- gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
- };
- };
-
- hdmi0-con {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi0_con_in: endpoint {
- remote-endpoint = <&hdmi0_out_con>;
- };
+ status = "disabled";
};
};
@@ -101,19 +77,17 @@ fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <0 70 75 80 100>;
fan-supply = <&vcc5v0_sys>;
- pwms = <&pwm3 0 50000 0>;
#cooling-cells = <2>;
};
pwm-leds {
compatible = "pwm-leds";
- led {
+ led_green_pwm: led-2 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <2>;
max-brightness = <255>;
- pwms = <&pwm2 0 25000 0>;
};
};
@@ -124,48 +98,15 @@ rfkill {
shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
};
- sound {
+ analog_sound: sound {
compatible = "simple-audio-card";
- pinctrl-names = "default";
- pinctrl-0 = <&hp_detect>;
simple-audio-card,name = "Analog";
- simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
- simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
simple-audio-card,bitclock-master = <&daicpu>;
simple-audio-card,frame-master = <&daicpu>;
/*TODO: SARADC_IN3 is used as MIC detection / key input */
- simple-audio-card,widgets =
- "Microphone", "Onboard Microphone",
- "Microphone", "Microphone Jack",
- "Speaker", "Speaker",
- "Headphone", "Headphones";
-
- simple-audio-card,routing =
- "Headphones", "LOUT1",
- "Headphones", "ROUT1",
- "Speaker", "LOUT2",
- "Speaker", "ROUT2",
-
- "Headphones", "Headphones Amp OUTL",
- "Headphones", "Headphones Amp OUTR",
- "Headphones Amp INL", "LOUT1",
- "Headphones Amp INR", "ROUT1",
-
- "Speaker", "Speaker Amp OUTL",
- "Speaker", "Speaker Amp OUTR",
- "Speaker Amp INL", "LOUT2",
- "Speaker Amp INR", "ROUT2",
-
- /* single ended signal to LINPUT1 */
- "LINPUT1", "Microphone Jack",
- "RINPUT1", "Microphone Jack",
- /* differential signal */
- "LINPUT2", "Onboard Microphone",
- "RINPUT2", "Onboard Microphone";
-
daicpu: simple-audio-card,cpu {
sound-dai = <&i2s0_8ch>;
system-clock-frequency = <12288000>;
@@ -190,12 +131,11 @@ vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth {
compatible = "regulator-fixed";
- gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
regulator-name = "vcc3v3_pcie_eth";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <50000>;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc_3v3_s3>;
};
vcc3v3_wf: regulator-vcc3v3-wf {
@@ -207,6 +147,7 @@ vcc3v3_wf: regulator-vcc3v3-wf {
regulator-max-microvolt = <3300000>;
startup-delay-us = <50000>;
vin-supply = <&vcc5v0_sys>;
+ status = "disabled";
};
vcc5v0_sys: regulator-vcc5v0-sys {
@@ -221,9 +162,6 @@ vcc5v0_sys: regulator-vcc5v0-sys {
vcc5v0_usb20: regulator-vcc5v0-usb20 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_usb20_en>;
regulator-name = "vcc5v0_usb20";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -231,14 +169,6 @@ vcc5v0_usb20: regulator-vcc5v0-usb20 {
};
};
-&combphy0_ps {
- status = "okay";
-};
-
-&combphy1_ps {
- status = "okay";
-};
-
&combphy2_psu {
status = "okay";
};
@@ -280,26 +210,6 @@ &gpu {
status = "okay";
};
-&hdmi0 {
- status = "okay";
-};
-
-&hdmi0_in {
- hdmi0_in_vp0: endpoint {
- remote-endpoint = <&vp0_out_hdmi0>;
- };
-};
-
-&hdmi0_out {
- hdmi0_out_con: endpoint {
- remote-endpoint = <&hdmi0_con_in>;
- };
-};
-
-&hdptxphy_hdmi0 {
- status = "okay";
-};
-
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
@@ -347,12 +257,8 @@ &i2c6 {
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
@@ -365,10 +271,11 @@ es8388: audio-codec@11 {
compatible = "everest,es8388";
reg = <0x11>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
- AVDD-supply = <&vcc_1v8_s0>;
+ clock-names = "mclk";
+ AVDD-supply = <&vcc_3v3_s0>;
DVDD-supply = <&vcc_1v8_s0>;
HPVDD-supply = <&vcc_3v3_s0>;
- PVDD-supply = <&vcc_3v3_s0>;
+ PVDD-supply = <&vcc_1v8_s0>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
#sound-dai-cells = <0>;
@@ -424,27 +331,6 @@ package_fan1: package-fan1 {
};
};
-/* phy1 - M.KEY socket */
-&pcie2x1l0 {
- reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_wf>;
- status = "okay";
-};
-
-/* phy2 - right ethernet port */
-&pcie2x1l1 {
- reset-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie_eth>;
- status = "okay";
-};
-
-/* phy0 - left ethernet port */
-&pcie2x1l2 {
- reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie_eth>;
- status = "okay";
-};
-
&pcie30phy {
status = "okay";
};
@@ -455,49 +341,6 @@ &pcie3x4 {
status = "okay";
};
-&pinctrl {
- hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- leds {
- blue_led_pin: blue-led {
- rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- ir-receiver {
- ir_receiver_pin: ir-receiver-pin {
- rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sound {
- hp_detect: hp-detect {
- rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb {
- vcc5v0_usb20_en: vcc5v0-usb20-en {
- rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm2 {
- pinctrl-0 = <&pwm2m1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&pwm3 {
- pinctrl-0 = <&pwm3m1_pins>;
- status = "okay";
-};
-
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
@@ -529,8 +372,6 @@ &sdmmc {
};
&sfc {
- pinctrl-names = "default";
- pinctrl-0 = <&fspim1_pins>;
status = "okay";
spi_flash: flash@0 {
@@ -899,11 +740,6 @@ &uart2 {
status = "okay";
};
-&uart9 {
- pinctrl-0 = <&uart9m0_xfer>;
- status = "okay";
-};
-
&usb_host0_ehci {
status = "okay";
};
@@ -927,10 +763,3 @@ &vop_mmu {
&vop {
status = "okay";
};
-
-&vp0 {
- vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
- reg = <ROCKCHIP_VOP2_EP_HDMI0>;
- remote-endpoint = <&hdmi0_in_vp0>;
- };
-};
--
2.47.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 3/7] arm64: dts: rockchip: Add Orange Pi 5 Max board
2024-12-29 18:41 [PATCH v4 0/7] arm64: dts: rockchip: Orange Pi 5 Max board Jimmy Hon
2024-12-29 18:41 ` [PATCH 1/7] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi Jimmy Hon
2024-12-29 18:41 ` [PATCH 2/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max Jimmy Hon
@ 2024-12-29 18:41 ` Jimmy Hon
2024-12-29 18:41 ` [RFC 4/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra Jimmy Hon
` (3 subsequent siblings)
6 siblings, 0 replies; 17+ messages in thread
From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw)
To: Heiko Stuebner
Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon
The RK3588 Single Board Computer includes
- eMMC
- microSD
- UART
- 2 PWM LEDs
- RTC
- RTL8125 network controller on PCIe 2.0x1.
- M.2 M-key connector routed to PCIe 3.0x4
- PWM controlled heat sink fan.
- 2 USB2 ports
- lower USB3 port
- upper USB3 port with OTG capability
- Mali GPU
- SPI NOR flash
- Mask Rom button
- Analog audio using es8388 codec via the headset jack and onboard mic
- HDMI0
the vcc5v0_usb30 regulator shares the same enable gpio pin as the
vcc5v0_usb20 regulator.
The Orange Pi 5 Max and Orange Pi 5 Ultra are both credit-card sized
boards with similar layout. The 5 Max has an extra HDMI0 while the 5
Ultra has a HDMI IN instead.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../rockchip/rk3588-orangepi-5-compact.dtsi | 126 ++++++++++++++++++
.../dts/rockchip/rk3588-orangepi-5-max.dts | 60 +++++++++
.../boot/dts/rockchip/rk3588-orangepi-5.dtsi | 8 ++
4 files changed, 195 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 86cc418a2255..83ad11650f0b 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -142,6 +142,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
new file mode 100644
index 000000000000..205130a3efec
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588-orangepi-5.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi 5 Max";
+ compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
+};
+
+&headphone_amp {
+ /* PHONE_CTL */
+ enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+};
+
+&analog_sound {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,aux-devs = <&headphone_amp>;
+ simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
+
+ simple-audio-card,routing =
+ "Headphones", "LOUT1",
+ "Headphones", "ROUT1",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones";
+};
+
+&fan {
+ /* FAN_CTL_H */
+ pwms = <&pwm9 0 50000 0>;
+};
+
+&hym8563 {
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int_l>;
+};
+
+&led_blue_pwm {
+ /* PWM_LED1 */
+ pwms = <&pwm4 0 25000 0>;
+ status = "okay";
+};
+
+&led_green_pwm {
+ /* PWM_LED2 */
+ pwms = <&pwm5 0 25000 0>;
+};
+
+/* phy2 */
+&pcie2x1l1 {
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie_eth>;
+ status = "okay";
+};
+
+&pinctrl {
+ hym8563 {
+ rtc_int_l: hym8563-int {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sound {
+ hp_detect: hp-detect {
+ rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb_host_pwren: usb-host-pwren {
+ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4m0_pins>;
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm5m1_pins>;
+ status = "okay";
+};
+
+&pwm9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm9m2_pins>;
+ status = "okay";
+};
+
+&sfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim2_pins>;
+};
+
+/* pcie eth. not a real regulator. 33VAUX */
+&vcc3v3_pcie_eth {
+ /* Ethernet_power_en */
+ gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
+};
+
+/*
+ * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic,
+ * both regulators share the same enable gpio
+ */
+&vcc5v0_usb20 {
+ /* USB_HOST_PWREN */
+ gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
new file mode 100644
index 000000000000..ce44549babf4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588-orangepi-5-compact.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi 5 Max";
+ compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
+
+ hdmi0-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out_con>;
+ };
+ };
+ };
+};
+
+&hdmi0 {
+ status = "okay";
+};
+
+&hdmi0_in {
+ hdmi0_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi0>;
+ };
+};
+
+&hdmi0_out {
+ hdmi0_out_con: endpoint {
+ remote-endpoint = <&hdmi0_con_in>;
+ };
+};
+
+&hdptxphy_hdmi0 {
+ status = "okay";
+};
+
+&pinctrl {
+
+ usb {
+ usb_otg_pwren: usb-otg-pwren {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&vp0 {
+ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi0_in_vp0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
index d72afd368d8b..df9b0fd18e24 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
@@ -83,6 +83,14 @@ fan: pwm-fan {
pwm-leds {
compatible = "pwm-leds";
+ led_blue_pwm: led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <255>;
+ status = "disabled";
+ };
+
led_green_pwm: led-2 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
--
2.47.1
^ permalink raw reply related [flat|nested] 17+ messages in thread