[PATCH v5 0/5] Add initial support for QCS615 SoC and QCS615 RIDE board

[PATCH v5 0/5] Add initial support for QCS615 SoC and QCS615 RIDE board

[Lijuan Gao]

Introduces the Device Tree for the QCS615 platform.

Features added and enabled:
- CPUs with PSCI idle states
- Interrupt-controller with PDC wakeup support
- Timers, TCSR Clock Controllers
- Reserved Shared memory
- QFPROM
- TLMM
- Watchdog
- RPMH controller
- Sleep stats driver
- Rpmhpd power controller
- Interconnect
- GCC and Rpmhcc
- QUP with Uart serial support

Bindings and base Device Tree for the QCS615 SoC are splited
in four parts:
- 1-2: Binding files for QCS615 SoC and PDC (Reviewed)
- 3-4: Initial DTSI and RIDE board device tree
- 5  : Enable uart related configs

Bindings Dependencies:
- watchdog: https://lore.kernel.org/all/20240920-add_watchdog_compatible_for_qcs615-v2-1-427944f1151e@quicinc.com/ - Reviewed
- qfprom: https://lore.kernel.org/all/20240912-add_qfprom_compatible_for_qcs615-v1-1-9ef2e26c14ee@quicinc.com/ - Reviewed
- tcsr: https://lore.kernel.org/all/20240920-add_tcsr_compatible_for_qcs615-v2-1-8ce2dbc7f72c@quicinc.com/ - Applied
- tlmm: https://lore.kernel.org/all/20240920-add_qcs615_pinctrl_driver-v2-1-e03c42a9d055@quicinc.com/ - Applied
- interconnect: https://lore.kernel.org/all/20240924143958.25-2-quic_rlaggysh@quicinc.com/ - Applied
- rpmhcc: https://lore.kernel.org/all/20241022-qcs615-clock-driver-v4-1-3d716ad0d987@quicinc.com/  - Reviewed
- gcc: https://lore.kernel.org/all/20241022-qcs615-clock-driver-v4-3-3d716ad0d987@quicinc.com/ - Reviewed
- rpmhpd: https://lore.kernel.org/all/20240927-add_qcs615_qcs8300_powerdomains_driver_support-v2-3-18c030ad7b68@quicinc.com/ - Applied

Build Dependencies:
- tlmm: https://lore.kernel.org/all/20240920-add_qcs615_pinctrl_driver-v2-2-e03c42a9d055@quicinc.com/ - Applied
- rpmhcc: https://lore.kernel.org/all/20241022-qcs615-clock-driver-v4-2-3d716ad0d987@quicinc.com/ - Reviewed
- gcc: https://lore.kernel.org/all/20241022-qcs615-clock-driver-v4-4-3d716ad0d987@quicinc.com/

Patch made the following verifications:
- Successfully passed dt_binding_check with DT_CHECKER_FLAGS=-m for earch binding file
- Successfully passed dtbs_check with W=1 for dts
- Verified CPU Hotplug, idle and online CPUs on QCS615 ride board
- Checked pinctrl-maps path
- Verified watchdog functionality with "echo 1 > /dev/watchdog", can trigger
  a watchdog bark and later bite
- Verified functionality with UART console on QCS615 ride board
- RPMH controller driver probed successfully
- Sleep stats driver probed successfully and checked qcom_stats
  node on QCS615 ride board

Signed-off-by: lijuang <quic_lijuang@quicinc.com>
---
Changes in v5:
- Remove applied patches 2 and 4
- Update the titles and commit messages of the initial DTSI and ride DTS
- Update the commit message of defconfig patch
- Pad register addresses to 8 hex digits
- Link to v4: https://lore.kernel.org/r/20241022-add_initial_support_for_qcs615-v4-0-0a551c6dd342@quicinc.com

Changes in v4:
- Configure vreg_l17a to High Power Mode (HPM) as it supplies power to UFS
  and eMMC, which can be utilized as boot devices.
- Link to v3: https://lore.kernel.org/r/20240926-add_initial_support_for_qcs615-v3-0-e37617e91c62@quicinc.com

Changes in v3:
- Added interconnect, GCC, RPMHCC, QPU, and RPMHPD related nodes for UART console
- Enabled UART condole on ride board device
- Link to v2: https://lore.kernel.org/r/20240913-add_initial_support_for_qcs615-v2-0-9236223e7dab@quicinc.com

Changes in v2:
- Collected reviewed-bys
- Removed extra blank line
- Removed redundant function
- Renamed xo-board to xo-board-clk and move it and sleep-clk to board dts
- Renamed system-sleep to cluster_sleep_2
- Removed cluster1
- Added entry-method for idle-states
- Added DTS chassis type
- Added TCSR Clock Controllers
- Added Reserved Shared memory
- Added QFPROM
- Added TLMM
- Added Watchdog
- Added RPMH controller
- Added Sleep stats driver
- Link to v1: https://lore.kernel.org/r/20240828-add_initial_support_for_qcs615-v1-0-5599869ea10f@quicinc.com

---
Lijuan Gao (5):
      dt-bindings: arm: qcom: document QCS615 and the reference board
      dt-bindings: qcom,pdc: document QCS615 Power Domain Controller
      arm64: dts: qcom: add QCS615 platform
      arm64: dts: qcom: add base QCS615 RIDE
      arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS615

 Documentation/devicetree/bindings/arm/qcom.yaml    |   6 +
 .../bindings/interrupt-controller/qcom,pdc.yaml    |   1 +
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 arch/arm64/boot/dts/qcom/qcs615-ride.dts           | 219 +++++++
 arch/arm64/boot/dts/qcom/qcs615.dtsi               | 688 +++++++++++++++++++++
 arch/arm64/configs/defconfig                       |   3 +
 6 files changed, 918 insertions(+)
---
base-commit: ec29543c01b3dbfcb9a2daa4e0cd33afb3c30c39
change-id: 20241104-add_initial_support_for_qcs615-6045c281925b
prerequisite-change-id: 20240919-qcs615-clock-driver-d74abed69854:v4
prerequisite-patch-id: cd9fc0a399ab430e293764d0911a38109664ca91
prerequisite-patch-id: 07f2c7378c7bbd560f26b61785b6814270647f1b
prerequisite-patch-id: a57054b890d767b45cca87e71b4a0f6bf6914c2f
prerequisite-patch-id: 5a8e9ea15a2c3d60b4dbdf11b4e2695742d6333c
prerequisite-change-id: 20240920-add_watchdog_compatible_for_qcs615-eec8a8c2c924:v2
prerequisite-patch-id: 3a76212d3a3e930d771312ff9349f87aee5c55d5
prerequisite-change-id: 20240911-add_qfprom_compatible_for_qcs615-e3b02f6fa71e:v1
prerequisite-patch-id: 8a2454d5e07e56a6dd03f762f498051065635d85

Best regards,
-- 
lijuang <quic_lijuang@quicinc.com>

[PATCH v5 1/5] dt-bindings: arm: qcom: document QCS615 and the reference board

[Lijuan Gao]

Document the QCS615 SoC and its reference board QCS615 RIDE.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 0f18cb35c774..a1d03d341498 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -42,6 +42,7 @@ description: |
         msm8996
         msm8998
         qcs404
+        qcs615
         qcs8550
         qcm2290
         qcm6490
@@ -897,6 +898,11 @@ properties:
           - const: qcom,qcs404-evb
           - const: qcom,qcs404
 
+      - items:
+          - enum:
+              - qcom,qcs615-ride
+          - const: qcom,qcs615
+
       - items:
           - enum:
               - qcom,sa8155p-adp

-- 
2.46.0

[PATCH v5 2/5] dt-bindings: qcom,pdc: document QCS615 Power Domain Controller

[Lijuan Gao]

Add a compatible for the Power Domain Controller on QCS615 platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
---
 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
index b1ea08a41bb0..ac7ccd989441 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -26,6 +26,7 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,qcs615-pdc
           - qcom,qdu1000-pdc
           - qcom,sa8255p-pdc
           - qcom,sa8775p-pdc

-- 
2.46.0

[PATCH v5 3/5] arm64: dts: qcom: add QCS615 platform

[Lijuan Gao]

Add initial DTSI for QCS615 SoC.

Features added in this revision:
- CPUs with PSCI idle states
- Interrupt-controller with PDC wakeup support
- Timers, TCSR Clock Controllers
- Reserved Shared memory
- QFPROM
- TLMM
- Watchdog
- RPMH controller
- Sleep stats driver
- Rpmhpd power controller
- Interconnect
- GCC and Rpmhcc
- QUP with Uart serial support

Written with help from Tingguo Cheng (added rpmhpd power controller nodes)
Taniya Das (added clocks nodes), and Raviteja Laggyshetty (added
interconnect nodes).

Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs615.dtsi | 688 +++++++++++++++++++++++++++++++++++
 1 file changed, 688 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
new file mode 100644
index 000000000000..868808918fd2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -0,0 +1,688 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,qcs615-gcc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+			next-level-cache = <&l2_100>;
+
+			l2_100: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+			next-level-cache = <&l2_200>;
+
+			l2_200: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+			next-level-cache = <&l2_300>;
+
+			l2_300: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+			next-level-cache = <&l2_400>;
+
+			l2_400: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+			next-level-cache = <&l2_500>;
+
+			l2_500: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+			next-level-cache = <&l2_600>;
+			#cooling-cells = <2>;
+
+			l2_600: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+			next-level-cache = <&l2_700>;
+
+			l2_700: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+
+		little_cpu_sleep_0: cpu-sleep-0-0 {
+			compatible = "arm,idle-state";
+			idle-state-name = "silver-power-collapse";
+			arm,psci-suspend-param = <0x40000003>;
+			entry-latency-us = <549>;
+			exit-latency-us = <901>;
+			min-residency-us = <1774>;
+			local-timer-stop;
+		};
+
+		little_cpu_sleep_1: cpu-sleep-0-1 {
+			compatible = "arm,idle-state";
+			idle-state-name = "silver-rail-power-collapse";
+			arm,psci-suspend-param = <0x40000004>;
+			entry-latency-us = <702>;
+			exit-latency-us = <915>;
+			min-residency-us = <4001>;
+			local-timer-stop;
+		};
+
+		big_cpu_sleep_0: cpu-sleep-1-0 {
+			compatible = "arm,idle-state";
+			idle-state-name = "gold-power-collapse";
+			arm,psci-suspend-param = <0x40000003>;
+			entry-latency-us = <523>;
+			exit-latency-us = <1244>;
+			min-residency-us = <2207>;
+			local-timer-stop;
+		};
+
+		big_cpu_sleep_1: cpu-sleep-1-1 {
+			compatible = "arm,idle-state";
+			idle-state-name = "gold-rail-power-collapse";
+			arm,psci-suspend-param = <0x40000004>;
+			entry-latency-us = <526>;
+			exit-latency-us = <1854>;
+			min-residency-us = <5555>;
+			local-timer-stop;
+		};
+	};
+
+	domain-idle-states {
+		cluster_sleep_0: cluster-sleep-0 {
+			compatible = "domain-idle-state";
+			arm,psci-suspend-param = <0x41000044>;
+			entry-latency-us = <2752>;
+			exit-latency-us = <3048>;
+			min-residency-us = <6118>;
+		};
+
+		cluster_sleep_1: cluster-sleep-1 {
+			compatible = "domain-idle-state";
+			arm,psci-suspend-param = <0x41001344>;
+			entry-latency-us = <3263>;
+			exit-latency-us = <4562>;
+			min-residency-us = <8467>;
+		};
+
+		cluster_sleep_2: cluster-sleep-2 {
+			compatible = "domain-idle-state";
+			arm,psci-suspend-param = <0x4100b344>;
+			entry-latency-us = <3638>;
+			exit-latency-us = <6562>;
+			min-residency-us = <9826>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	camnoc_virt: interconnect-0 {
+		compatible = "qcom,qcs615-camnoc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	ipa_virt: interconnect-1 {
+		compatible = "qcom,qcs615-ipa-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-2 {
+		compatible = "qcom,qcs615-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0
+					      &cluster_sleep_1
+					      &cluster_sleep_2>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_region: smem@86000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x10 0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,qcs615-gcc";
+			reg = <0 0x00100000 0 0x1f0000>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		qfprom: efuse@780000 {
+			compatible = "qcom,qcs615-qfprom", "qcom,qfprom";
+			reg = <0x0 0x00780000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&aggre1_noc MASTER_QUP_0 0
+						 &mc_virt SLAVE_EBI1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0
+						 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			reg = <0x0 0x01500000 0x0 0x5080>;
+			compatible = "qcom,qcs615-config-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			reg = <0x0 0x01620000 0x0 0x1f300>;
+			compatible = "qcom,qcs615-system-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@1700000 {
+			reg = <0x0 0x01700000 0x0 0x3f200>;
+			compatible = "qcom,qcs615-aggre1-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			reg = <0x0 0x01740000 0x0 0x1c100>;
+			compatible = "qcom,qcs615-mmss-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,qcs615-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,qcs615-tlmm";
+			reg = <0x0 0x03100000 0x0 0x300000>,
+			      <0x0 0x03500000 0x0 0x300000>,
+			      <0x0 0x03d00000 0x0 0x300000>;
+			reg-names = "east",
+				    "west",
+				    "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 123>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart0_tx: qup-uart0-tx-state {
+				pins = "gpio16";
+				function = "qup0";
+			};
+
+			qup_uart0_rx: qup-uart0-rx-state {
+				pins = "gpio17";
+				function = "qup0";
+			};
+		};
+
+		dc_noc: interconnect@9160000 {
+			reg = <0x0 0x09160000 0x0 0x3200>;
+			compatible = "qcom,qcs615-dc-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			reg = <0x0 0x09680000 0x0 0x3e200>;
+			compatible = "qcom,qcs615-gem-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,qcs615-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		watchdog: watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-qcs615", "qcom,kpss-wdt";
+			reg = <0x0 0x17c10000 0x0 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			qcom,drv-id = <2>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,tcs-config = <ACTIVE_TCS    2>,
+					  <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>,
+					  <CONTROL_TCS   1>;
+
+			label = "apps_rsc";
+			power-domains = <&cluster_pd>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,qcs615-rpmh-clk";
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qcs615-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp-2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp-3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+	};
+
+	arch_timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};

-- 
2.46.0

[PATCH v5 4/5] arm64: dts: qcom: add base QCS615 RIDE

[Lijuan Gao]

Add initial support for Qualcomm QCS615 RIDE board and enable
the QCS615 RIDE board to shell with uart console.

Written with help from Tingguo Cheng (added regulator nodes).

Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile        |   1 +
 arch/arm64/boot/dts/qcom/qcs615-ride.dts | 219 +++++++++++++++++++++++++++++++
 2 files changed, 220 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index ac199f809b0d..9ec3f9f1c5d8 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -110,6 +110,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs615-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
new file mode 100644
index 000000000000..ee6cab3924a6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcs615.dtsi"
+/ {
+	model = "Qualcomm Technologies, Inc. QCS615 Ride";
+	compatible = "qcom,qcs615-ride", "qcom,qcs615";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <38400000>;
+			#clock-cells = <0>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s3a: smps3 {
+			regulator-name = "vreg_s3a";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1829000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a: smps6 {
+			regulator-name = "vreg_s6a";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1404000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1a: ldo1 {
+			regulator-name = "vreg_l1a";
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <852000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a: ldo2 {
+			regulator-name = "vreg_l2a";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <875000>;
+			regulator-max-microvolt = <975000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a: ldo10 {
+			regulator-name = "vreg_l10a";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a: ldo12 {
+			regulator-name = "vreg_l12a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3230000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a: ldo15 {
+			regulator-name = "vreg_l15a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a: ldo16 {
+			regulator-name = "vreg_l16a";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a: ldo17 {
+			regulator-name = "vreg_l17a";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gcc {
+	clocks = <&rpmhcc RPMH_CXO_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK_A>,
+		 <&sleep_clk>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&rpmhcc {
+	clocks = <&xo_board_clk>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	clocks = <&sleep_clk>;
+};

-- 
2.46.0

[PATCH v5 5/5] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS615

[Lijuan Gao]

Enable clock controller, interconnect and pinctrl for Qualcomm QCS615
platform to boot to UART console.

The serial engine depends on GCC, interconnect, and pinctrl. It is
necessary to build them as built-in modules because the debug console
must be registered before userspace is launched. The primary reason for
this is that, for example, systemd opens /dev/console at launch (i.e.,
when the init process starts). Therefore, if we register the console after
this, we will not receive console output from systemd.

Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 0fad83642034..4657540d0c65 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -607,6 +607,7 @@ CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QCS615=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
@@ -1324,6 +1325,7 @@ CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
 CONFIG_QCS_GCC_404=y
+CONFIG_QCS_GCC_615=y
 CONFIG_SC_CAMCC_7280=m
 CONFIG_QDU_GCC_1000=y
 CONFIG_SC_CAMCC_8280XP=m
@@ -1630,6 +1632,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCM2290=y
 CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_QCS615=y
 CONFIG_INTERCONNECT_QCOM_QDU1000=y
 CONFIG_INTERCONNECT_QCOM_SA8775P=y
 CONFIG_INTERCONNECT_QCOM_SC7180=y

-- 
2.46.0

Re: [PATCH v5 5/5] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS615

[Dmitry Baryshkov]

On Mon, Nov 04, 2024 at 05:10:12PM +0800, Lijuan Gao wrote:
> Enable clock controller, interconnect and pinctrl for Qualcomm QCS615
> platform to boot to UART console.
> 
> The serial engine depends on GCC, interconnect, and pinctrl. It is
> necessary to build them as built-in modules because the debug console
> must be registered before userspace is launched. The primary reason for
> this is that, for example, systemd opens /dev/console at launch (i.e.,
> when the init process starts). Therefore, if we register the console after
> this, we will not receive console output from systemd.
> 
> Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
> ---
>  arch/arm64/configs/defconfig | 3 +++
>  1 file changed, 3 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH v5 4/5] arm64: dts: qcom: add base QCS615 RIDE

[Dmitry Baryshkov]

On Mon, Nov 04, 2024 at 05:10:11PM +0800, Lijuan Gao wrote:
> Add initial support for Qualcomm QCS615 RIDE board and enable
> the QCS615 RIDE board to shell with uart console.
> 
> Written with help from Tingguo Cheng (added regulator nodes).
> 
> Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile        |   1 +
>  arch/arm64/boot/dts/qcom/qcs615-ride.dts | 219 +++++++++++++++++++++++++++++++
>  2 files changed, 220 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: (subset) [PATCH v5 0/5] Add initial support for QCS615 SoC and QCS615 RIDE board

[Bjorn Andersson]

On Mon, 04 Nov 2024 17:10:07 +0800, Lijuan Gao wrote:
> Introduces the Device Tree for the QCS615 platform.
> 
> Features added and enabled:
> - CPUs with PSCI idle states
> - Interrupt-controller with PDC wakeup support
> - Timers, TCSR Clock Controllers
> - Reserved Shared memory
> - QFPROM
> - TLMM
> - Watchdog
> - RPMH controller
> - Sleep stats driver
> - Rpmhpd power controller
> - Interconnect
> - GCC and Rpmhcc
> - QUP with Uart serial support
> 
> [...]

Applied, thanks!

[5/5] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS615
      commit: 9eec6ce36b5dc981327e9f58025d012e524687b4

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: [PATCH v5 2/5] dt-bindings: qcom,pdc: document QCS615 Power Domain Controller

[Rob Herring]

On Mon, Nov 04, 2024 at 05:10:09PM +0800, Lijuan Gao wrote:
> Add a compatible for the Power Domain Controller on QCS615 platform.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
> ---
>  Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml | 1 +
>  1 file changed, 1 insertion(+)

Applied, thanks.