* [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support
@ 2025-01-09 13:12 Christian Marangi
2025-01-09 13:12 ` [PATCH v10 2/2] cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver Christian Marangi
2025-01-16 7:02 ` [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support Viresh Kumar
0 siblings, 2 replies; 5+ messages in thread
From: Christian Marangi @ 2025-01-09 13:12 UTC (permalink / raw)
To: Rafael J. Wysocki, Viresh Kumar, Ulf Hansson, Matthias Brugger,
AngeloGioacchino Del Regno, Christian Marangi, linux-kernel,
linux-pm, linux-arm-kernel, linux-mediatek, upstream
Add Airoha CPU PM Domain support to control frequency and power of CPU
present on Airoha EN7581 SoC.
Frequency and power can be controlled with the use of the SMC command by
passing the performance state. The driver also expose a read-only clock
that expose the current CPU frequency with SMC command.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Changes v10:
- Depends on HAVE_ARM_SMCCC
Changes v9:
- Fix compile error targetting wrong branch (remove_new change)
Changes v8:
- Add this patch
- Use SMC invoke instead of 1.2
drivers/pmdomain/mediatek/Kconfig | 12 ++
drivers/pmdomain/mediatek/Makefile | 1 +
.../pmdomain/mediatek/airoha-cpu-pmdomain.c | 144 ++++++++++++++++++
3 files changed, 157 insertions(+)
create mode 100644 drivers/pmdomain/mediatek/airoha-cpu-pmdomain.c
diff --git a/drivers/pmdomain/mediatek/Kconfig b/drivers/pmdomain/mediatek/Kconfig
index 21305c4f17fe..0e34a517ab7d 100644
--- a/drivers/pmdomain/mediatek/Kconfig
+++ b/drivers/pmdomain/mediatek/Kconfig
@@ -26,4 +26,16 @@ config MTK_SCPSYS_PM_DOMAINS
Control Processor System (SCPSYS) has several power management related
tasks in the system.
+config AIROHA_CPU_PM_DOMAIN
+ tristate "Airoha CPU power domain"
+ default ARCH_AIROHA
+ depends on HAVE_ARM_SMCCC
+ depends on PM
+ select PM_GENERIC_DOMAINS
+ help
+ Say y here to enable CPU power domain support for Airoha SoC.
+
+ CPU frequency and power is controlled by ATF with SMC command to
+ set performance states.
+
endmenu
diff --git a/drivers/pmdomain/mediatek/Makefile b/drivers/pmdomain/mediatek/Makefile
index 8cde09e654b3..0f6edce9239b 100644
--- a/drivers/pmdomain/mediatek/Makefile
+++ b/drivers/pmdomain/mediatek/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
obj-$(CONFIG_MTK_SCPSYS_PM_DOMAINS) += mtk-pm-domains.o
+obj-$(CONFIG_AIROHA_CPU_PM_DOMAIN) += airoha-cpu-pmdomain.o
diff --git a/drivers/pmdomain/mediatek/airoha-cpu-pmdomain.c b/drivers/pmdomain/mediatek/airoha-cpu-pmdomain.c
new file mode 100644
index 000000000000..0fd88d2f9ac2
--- /dev/null
+++ b/drivers/pmdomain/mediatek/airoha-cpu-pmdomain.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/arm-smccc.h>
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+
+#define AIROHA_SIP_AVS_HANDLE 0x82000301
+#define AIROHA_AVS_OP_BASE 0xddddddd0
+#define AIROHA_AVS_OP_MASK GENMASK(1, 0)
+#define AIROHA_AVS_OP_FREQ_DYN_ADJ (AIROHA_AVS_OP_BASE | \
+ FIELD_PREP(AIROHA_AVS_OP_MASK, 0x1))
+#define AIROHA_AVS_OP_GET_FREQ (AIROHA_AVS_OP_BASE | \
+ FIELD_PREP(AIROHA_AVS_OP_MASK, 0x2))
+
+struct airoha_cpu_pmdomain_priv {
+ struct clk_hw hw;
+ struct generic_pm_domain pd;
+};
+
+static long airoha_cpu_pmdomain_clk_round(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ return rate;
+}
+
+static unsigned long airoha_cpu_pmdomain_clk_get(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_1_1_invoke(AIROHA_SIP_AVS_HANDLE, AIROHA_AVS_OP_GET_FREQ,
+ 0, 0, 0, 0, 0, 0, &res);
+
+ /* SMCCC returns freq in MHz */
+ return (int)(res.a0 * 1000 * 1000);
+}
+
+/* Airoha CPU clk SMCC is always enabled */
+static int airoha_cpu_pmdomain_clk_is_enabled(struct clk_hw *hw)
+{
+ return true;
+}
+
+static const struct clk_ops airoha_cpu_pmdomain_clk_ops = {
+ .recalc_rate = airoha_cpu_pmdomain_clk_get,
+ .is_enabled = airoha_cpu_pmdomain_clk_is_enabled,
+ .round_rate = airoha_cpu_pmdomain_clk_round,
+};
+
+static int airoha_cpu_pmdomain_set_performance_state(struct generic_pm_domain *domain,
+ unsigned int state)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_1_1_invoke(AIROHA_SIP_AVS_HANDLE, AIROHA_AVS_OP_FREQ_DYN_ADJ,
+ 0, state, 0, 0, 0, 0, &res);
+
+ /* SMC signal correct apply by unsetting BIT 0 */
+ return res.a0 & BIT(0) ? -EINVAL : 0;
+}
+
+static int airoha_cpu_pmdomain_probe(struct platform_device *pdev)
+{
+ struct airoha_cpu_pmdomain_priv *priv;
+ struct device *dev = &pdev->dev;
+ const struct clk_init_data init = {
+ .name = "cpu",
+ .ops = &airoha_cpu_pmdomain_clk_ops,
+ /* Clock with no set_rate, can't cache */
+ .flags = CLK_GET_RATE_NOCACHE,
+ };
+ struct generic_pm_domain *pd;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ /* Init and register a get-only clk for Cpufreq */
+ priv->hw.init = &init;
+ ret = devm_clk_hw_register(dev, &priv->hw);
+ if (ret)
+ return ret;
+
+ ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+ &priv->hw);
+ if (ret)
+ return ret;
+
+ /* Init and register a PD for CPU */
+ pd = &priv->pd;
+ pd->name = "cpu_pd";
+ pd->flags = GENPD_FLAG_ALWAYS_ON;
+ pd->set_performance_state = airoha_cpu_pmdomain_set_performance_state;
+
+ ret = pm_genpd_init(pd, NULL, false);
+ if (ret)
+ return ret;
+
+ ret = of_genpd_add_provider_simple(dev->of_node, pd);
+ if (ret)
+ goto err_add_provider;
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+
+err_add_provider:
+ pm_genpd_remove(pd);
+
+ return ret;
+}
+
+static void airoha_cpu_pmdomain_remove(struct platform_device *pdev)
+{
+ struct airoha_cpu_pmdomain_priv *priv = platform_get_drvdata(pdev);
+
+ of_genpd_del_provider(pdev->dev.of_node);
+ pm_genpd_remove(&priv->pd);
+}
+
+static const struct of_device_id airoha_cpu_pmdomain_of_match[] = {
+ { .compatible = "airoha,en7581-cpufreq" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, airoha_cpu_pmdomain_of_match);
+
+static struct platform_driver airoha_cpu_pmdomain_driver = {
+ .probe = airoha_cpu_pmdomain_probe,
+ .remove = airoha_cpu_pmdomain_remove,
+ .driver = {
+ .name = "airoha-cpu-pmdomain",
+ .of_match_table = airoha_cpu_pmdomain_of_match,
+ },
+};
+module_platform_driver(airoha_cpu_pmdomain_driver);
+
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("CPU PM domain driver for Airoha SoCs");
+MODULE_LICENSE("GPL");
--
2.45.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v10 2/2] cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
2025-01-09 13:12 [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support Christian Marangi
@ 2025-01-09 13:12 ` Christian Marangi
2025-01-16 7:02 ` [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support Viresh Kumar
1 sibling, 0 replies; 5+ messages in thread
From: Christian Marangi @ 2025-01-09 13:12 UTC (permalink / raw)
To: Rafael J. Wysocki, Viresh Kumar, Ulf Hansson, Matthias Brugger,
AngeloGioacchino Del Regno, Christian Marangi, linux-kernel,
linux-pm, linux-arm-kernel, linux-mediatek, upstream
Add simple CPU Freq driver for Airoha EN7581 SoC that control CPU
frequency scaling with SMC APIs and register a generic "cpufreq-dt"
device.
All CPU share the same frequency and can't be controlled independently.
CPU frequency is controlled by the attached PM domain.
Add SoC compatible to cpufreq-dt-plat block list as a dedicated cpufreq
driver is needed with OPP v2 nodes declared in DTS.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Changes v9:
- Fix compile error targetting wrong branch (remove_new change and new PM OPs)
Changes v8:
- Split in dedicated PM domain driver
Changes v7:
- No changes
Changes v6:
- Improve Kconfig depends logic
- Select PM (PM_GENERIC_DOMAINS depends on it)
- Drop (int) cast for
Changes v5:
- Rename cpu_pd to perf for power domain name
- Use remove instead of remove_new
Changes v4:
- Rework to clk-only + PM set_performance_state implementation
Changes v3:
- Adapt to new cpufreq-dt APIs
- Register cpufreq-dt instead of custom freq driver
Changes v2:
- Fix kernel bot error with missing slab.h and bitfield.h header
- Limit COMPILE_TEST to ARM64 due to smcc 1.2
drivers/cpufreq/Kconfig.arm | 8 ++
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/airoha-cpufreq.c | 152 +++++++++++++++++++++++++++
drivers/cpufreq/cpufreq-dt-platdev.c | 2 +
4 files changed, 163 insertions(+)
create mode 100644 drivers/cpufreq/airoha-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 5f7e13e60c80..704e84d00639 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -15,6 +15,14 @@ config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM
To compile this driver as a module, choose M here: the
module will be called sun50i-cpufreq-nvmem.
+config ARM_AIROHA_SOC_CPUFREQ
+ tristate "Airoha EN7581 SoC CPUFreq support"
+ depends on ARCH_AIROHA || COMPILE_TEST
+ select PM_OPP
+ default ARCH_AIROHA
+ help
+ This adds the CPUFreq driver for Airoha EN7581 SoCs.
+
config ARM_APPLE_SOC_CPUFREQ
tristate "Apple Silicon SoC CPUFreq support"
depends on ARCH_APPLE || (COMPILE_TEST && 64BIT)
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index d35a28dd9463..890fff99f37d 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY) += amd_freq_sensitivity.o
##################################################################################
# ARM SoC drivers
+obj-$(CONFIG_ARM_AIROHA_SOC_CPUFREQ) += airoha-cpufreq.o
obj-$(CONFIG_ARM_APPLE_SOC_CPUFREQ) += apple-soc-cpufreq.o
obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o
obj-$(CONFIG_ARM_ARMADA_8K_CPUFREQ) += armada-8k-cpufreq.o
diff --git a/drivers/cpufreq/airoha-cpufreq.c b/drivers/cpufreq/airoha-cpufreq.c
new file mode 100644
index 000000000000..4fe39eadd163
--- /dev/null
+++ b/drivers/cpufreq/airoha-cpufreq.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitfield.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#include "cpufreq-dt.h"
+
+struct airoha_cpufreq_priv {
+ int opp_token;
+ struct dev_pm_domain_list *pd_list;
+ struct platform_device *cpufreq_dt;
+};
+
+static struct platform_device *cpufreq_pdev;
+
+/* NOP function to disable OPP from setting clock */
+static int airoha_cpufreq_config_clks_nop(struct device *dev,
+ struct opp_table *opp_table,
+ struct dev_pm_opp *opp,
+ void *data, bool scaling_down)
+{
+ return 0;
+}
+
+static const char * const airoha_cpufreq_clk_names[] = { "cpu", NULL };
+static const char * const airoha_cpufreq_pd_names[] = { "perf" };
+
+static int airoha_cpufreq_probe(struct platform_device *pdev)
+{
+ const struct dev_pm_domain_attach_data attach_data = {
+ .pd_names = airoha_cpufreq_pd_names,
+ .num_pd_names = ARRAY_SIZE(airoha_cpufreq_pd_names),
+ .pd_flags = PD_FLAG_DEV_LINK_ON | PD_FLAG_REQUIRED_OPP,
+ };
+ struct dev_pm_opp_config config = {
+ .clk_names = airoha_cpufreq_clk_names,
+ .config_clks = airoha_cpufreq_config_clks_nop,
+ };
+ struct platform_device *cpufreq_dt;
+ struct airoha_cpufreq_priv *priv;
+ struct device *dev = &pdev->dev;
+ struct device *cpu_dev;
+ int ret;
+
+ /* CPUs refer to the same OPP table */
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev)
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ /* Set OPP table conf with NOP config_clks */
+ priv->opp_token = dev_pm_opp_set_config(cpu_dev, &config);
+ if (priv->opp_token < 0)
+ return dev_err_probe(dev, priv->opp_token, "Failed to set OPP config\n");
+
+ /* Attach PM for OPP */
+ ret = dev_pm_domain_attach_list(cpu_dev, &attach_data,
+ &priv->pd_list);
+ if (ret)
+ goto clear_opp_config;
+
+ cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+ ret = PTR_ERR_OR_ZERO(cpufreq_dt);
+ if (ret) {
+ dev_err(dev, "failed to create cpufreq-dt device: %d\n", ret);
+ goto detach_pm;
+ }
+
+ priv->cpufreq_dt = cpufreq_dt;
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+
+detach_pm:
+ dev_pm_domain_detach_list(priv->pd_list);
+clear_opp_config:
+ dev_pm_opp_clear_config(priv->opp_token);
+
+ return ret;
+}
+
+static void airoha_cpufreq_remove(struct platform_device *pdev)
+{
+ struct airoha_cpufreq_priv *priv = platform_get_drvdata(pdev);
+
+ platform_device_unregister(priv->cpufreq_dt);
+
+ dev_pm_domain_detach_list(priv->pd_list);
+
+ dev_pm_opp_clear_config(priv->opp_token);
+}
+
+static struct platform_driver airoha_cpufreq_driver = {
+ .probe = airoha_cpufreq_probe,
+ .remove = airoha_cpufreq_remove,
+ .driver = {
+ .name = "airoha-cpufreq",
+ },
+};
+
+static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
+ { .compatible = "airoha,en7581" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, airoha_cpufreq_match_list);
+
+static int __init airoha_cpufreq_init(void)
+{
+ struct device_node *np = of_find_node_by_path("/");
+ const struct of_device_id *match;
+ int ret;
+
+ if (!np)
+ return -ENODEV;
+
+ match = of_match_node(airoha_cpufreq_match_list, np);
+ of_node_put(np);
+ if (!match)
+ return -ENODEV;
+
+ ret = platform_driver_register(&airoha_cpufreq_driver);
+ if (unlikely(ret < 0))
+ return ret;
+
+ cpufreq_pdev = platform_device_register_data(NULL, "airoha-cpufreq",
+ -1, match, sizeof(*match));
+ ret = PTR_ERR_OR_ZERO(cpufreq_pdev);
+ if (ret)
+ platform_driver_unregister(&airoha_cpufreq_driver);
+
+ return ret;
+}
+module_init(airoha_cpufreq_init);
+
+static void __exit airoha_cpufreq_exit(void)
+{
+ platform_device_unregister(cpufreq_pdev);
+ platform_driver_unregister(&airoha_cpufreq_driver);
+}
+module_exit(airoha_cpufreq_exit);
+
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("CPUfreq driver for Airoha SoCs");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 9c198bd4f7e9..2aa00769cf09 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -103,6 +103,8 @@ static const struct of_device_id allowlist[] __initconst = {
* platforms using "operating-points-v2" property.
*/
static const struct of_device_id blocklist[] __initconst = {
+ { .compatible = "airoha,en7581", },
+
{ .compatible = "allwinner,sun50i-a100" },
{ .compatible = "allwinner,sun50i-h6", },
{ .compatible = "allwinner,sun50i-h616", },
--
2.45.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support
2025-01-09 13:12 [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support Christian Marangi
2025-01-09 13:12 ` [PATCH v10 2/2] cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver Christian Marangi
@ 2025-01-16 7:02 ` Viresh Kumar
2025-01-16 15:58 ` Ulf Hansson
1 sibling, 1 reply; 5+ messages in thread
From: Viresh Kumar @ 2025-01-16 7:02 UTC (permalink / raw)
To: Christian Marangi
Cc: Rafael J. Wysocki, Ulf Hansson, Matthias Brugger,
AngeloGioacchino Del Regno, linux-kernel, linux-pm,
linux-arm-kernel, linux-mediatek, upstream
Ulf,
On 09-01-25, 14:12, Christian Marangi wrote:
> Add Airoha CPU PM Domain support to control frequency and power of CPU
> present on Airoha EN7581 SoC.
>
> Frequency and power can be controlled with the use of the SMC command by
> passing the performance state. The driver also expose a read-only clock
> that expose the current CPU frequency with SMC command.
>
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
> Changes v10:
> - Depends on HAVE_ARM_SMCCC
> Changes v9:
> - Fix compile error targetting wrong branch (remove_new change)
> Changes v8:
> - Add this patch
> - Use SMC invoke instead of 1.2
Any inputs on this ?
--
viresh
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support
2025-01-16 7:02 ` [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support Viresh Kumar
@ 2025-01-16 15:58 ` Ulf Hansson
2025-01-17 3:35 ` Viresh Kumar
0 siblings, 1 reply; 5+ messages in thread
From: Ulf Hansson @ 2025-01-16 15:58 UTC (permalink / raw)
To: Christian Marangi, Viresh Kumar
Cc: Rafael J. Wysocki, Matthias Brugger, AngeloGioacchino Del Regno,
linux-kernel, linux-pm, linux-arm-kernel, linux-mediatek,
upstream
On Thu, 16 Jan 2025 at 08:02, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> Ulf,
>
> On 09-01-25, 14:12, Christian Marangi wrote:
> > Add Airoha CPU PM Domain support to control frequency and power of CPU
> > present on Airoha EN7581 SoC.
> >
> > Frequency and power can be controlled with the use of the SMC command by
> > passing the performance state. The driver also expose a read-only clock
> > that expose the current CPU frequency with SMC command.
> >
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > ---
> > Changes v10:
> > - Depends on HAVE_ARM_SMCCC
> > Changes v9:
> > - Fix compile error targetting wrong branch (remove_new change)
> > Changes v8:
> > - Add this patch
> > - Use SMC invoke instead of 1.2
>
> Any inputs on this ?
Apologize for the delay! This looks good to me! So, applied for next
to my pmdomain tree, thanks!
I assume Viresh will take the cpufreq patch via his tree? Please let
me know if you prefer another route.
Kind regards
Uffe
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support
2025-01-16 15:58 ` Ulf Hansson
@ 2025-01-17 3:35 ` Viresh Kumar
0 siblings, 0 replies; 5+ messages in thread
From: Viresh Kumar @ 2025-01-17 3:35 UTC (permalink / raw)
To: Ulf Hansson
Cc: Christian Marangi, Rafael J. Wysocki, Matthias Brugger,
AngeloGioacchino Del Regno, linux-kernel, linux-pm,
linux-arm-kernel, linux-mediatek, upstream
On 16-01-25, 16:58, Ulf Hansson wrote:
> On Thu, 16 Jan 2025 at 08:02, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > Ulf,
> >
> > On 09-01-25, 14:12, Christian Marangi wrote:
> > > Add Airoha CPU PM Domain support to control frequency and power of CPU
> > > present on Airoha EN7581 SoC.
> > >
> > > Frequency and power can be controlled with the use of the SMC command by
> > > passing the performance state. The driver also expose a read-only clock
> > > that expose the current CPU frequency with SMC command.
> > >
> > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > > ---
> > > Changes v10:
> > > - Depends on HAVE_ARM_SMCCC
> > > Changes v9:
> > > - Fix compile error targetting wrong branch (remove_new change)
> > > Changes v8:
> > > - Add this patch
> > > - Use SMC invoke instead of 1.2
> >
> > Any inputs on this ?
>
> Apologize for the delay! This looks good to me! So, applied for next
> to my pmdomain tree, thanks!
>
> I assume Viresh will take the cpufreq patch via his tree? Please let
> me know if you prefer another route.
Applied 2/2. Thanks.
--
viresh
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2025-01-17 3:37 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-01-09 13:12 [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support Christian Marangi
2025-01-09 13:12 ` [PATCH v10 2/2] cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver Christian Marangi
2025-01-16 7:02 ` [PATCH v10 1/2] pmdomain: airoha: Add Airoha CPU PM Domain support Viresh Kumar
2025-01-16 15:58 ` Ulf Hansson
2025-01-17 3:35 ` Viresh Kumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).