[PATCH v2 2/2] arm64: dts: rockchip: Add HDMI0 audio output on rock-5b

[Detlev Casanova <detlev.casanova@collabora.com>]

Use the simple-audio-card driver with the hdmi0 QP node as CODEC and
the i2s5 device as CPU.

The simple-audio-card,mclk-fs value is set to 128 as it is done in
the downstream driver.

The #sound-dai-cells value is set to 0 in the hdmi0 node so that it can be
used as an audio codec node.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi |  1 +
 .../boot/dts/rockchip/rk3588-rock-5b.dts      | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index a337f3fb8377e..fcd1c85e6ce8f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -1395,6 +1395,7 @@ hdmi0: hdmi@fde80000 {
 		reset-names = "ref", "hdp";
 		rockchip,grf = <&sys_grf>;
 		rockchip,vo-grf = <&vo1_grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index d597112f1d5b8..1909078538367 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -49,6 +49,21 @@ hdmi0_con_in: endpoint {
 		};
 	};
 
+	hdmi0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,name = "hdmi0";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi0>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s5_8ch>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -318,6 +333,10 @@ i2s0_8ch_p0_0: endpoint {
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &package_thermal {
 	polling-delay = <1000>;
 
-- 
2.48.1