[PATCH v2 0/9] Add R5F and C7xv device nodes

[Judith Mendez <jm@ti.com>]

For am62x and am62ax devices, this patch series adds device nodes
for the R5F subsystem and C7xv DSP subsystem found in their
respective voltage domain, based on the device TRMs [0][1].

This patch series also includes patches for enabling IPC for am62x,
am62ax, and am62px by reserving memory and binding the mailbox
assignments for each remote core.

Also reserve main_rti4 and main_timer2 for the C7x DSP as per
firmware requirements.

Changes since v1:
- add patches 5-9 to enable ipc and complete device nodes
- disable each device node in the voltage domain files and
  enable at the board level file
- fix firmware names

[0] https://www.ti.com/lit/pdf/spruj16
[1] https://www.ti.com/lit/pdf/spruiv7

Devarsh Thakkar (3):
  arm64: dts: ti: k3-am62a-wakeup: Add R5F device node
  arm64: dts: ti: k3-am62a7-sk: Enable ipc with remote processors
  arm64: dts: ti: k3-am62p5-sk: Enable ipc with remote processors

Hari Nagalla (5):
  arm64: dts: ti: k3-am62-wakeup: Add wakeup r5f node
  arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node
  arm64: dts: ti: k3-am62x-sk-common: Enable ipc with remote processors
  arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
  arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP

Jai Luthra (1):
  arm64: dts: ti: k3-am62a-main: Add C7xv device node

 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi    | 25 ++++++
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi     | 12 +++
 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi      | 38 ++++++++
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi   | 25 ++++++
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       | 88 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts       | 50 +++++++++--
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 32 +++++--
 7 files changed, 259 insertions(+), 11 deletions(-)

-- 
2.48.0