From: Alexander Sverdlin <alexander.sverdlin@gmail.com>
To: soc@lists.linux.dev
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>,
Chen Wang <unicorn_wang@outlook.com>,
Inochi Amaoto <inochiama@outlook.com>, Lee Jones <lee@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Sebastian Reichel <sre@kernel.org>,
devicetree@vger.kernel.org, Haylen Chu <heylenay@outlook.com>,
linux-arm-kernel@lists.infradead.org,
linux-riscv@lists.infradead.org, linux-pm@vger.kernel.org,
Jisheng Zhang <jszhang@kernel.org>,
Chao Wei <chao.wei@sophgo.com>
Subject: [PATCH v3 0/7] arm64 support for Milk-V Duo Module 01 EVB
Date: Wed, 12 Feb 2025 23:43:32 +0100 [thread overview]
Message-ID: <20250212224347.1767819-1-alexander.sverdlin@gmail.com> (raw)
This series adds very basic support for Milk-V Duo Module 01 EVB [1] in
arm64 mode. The SoC (SG2000) is dual-arch, RiscV and ARM64, the latter has
been chosen because the upstream toolchain can be utilized.
Sophgo SG2000 seems to be a continuation of the Cvitek CV18xx series, same
peripherals with an addition of ARM64 core. Therefore it would be
beneficial not to copy-paste the peripherals' device-tree, but rather split
the most suitable riscv DT into ARCH-specific and peripherals parts and
just include the latter on the arm64 side.
This series adds the device-tree for Milk-V Duo Module 01 EVB, which
in turn contains Milk-V Duo Module 01 (separate .dtsi) on it, which has
SG2000 SoC inside (separate .dtsi).
This series has been tested with Sophgo-provided U-Boot binary [2]: it
boots from SD card; pinctrl, serial, GPIO drivers are functional (same
as for RiscV-based CV18xx SoCs).
Partial SoC documentation is available [3].
This series lacks the support of:
- USB
- Audio
- Ethernet
- WiFi
- Bluetooth
- eMMC
- Video
- "reboot" functionality
It would probably make sense that the series will go into ARM SOC tree.
Changelog:
v3:
- &cpus node has been moved into cv18xx-cpu.dtsi, &plic and &clint nodes
were moved into cv18xx-intc.dtsi to reduce code duplication;
v2:
- dropped all patches related to the new reboot driver and corresponding DT
and bindings;
- grouped DT-related and config-related patches together;
- added patch moving sophgo.yaml from riscv into soc (to share it with
ARM); added SG2000 SoC and Milk-V Duo Module 01 EVB into it;
- other changes are documented in the corresponding patches;
[1] https://milkv.io/docs/duo/getting-started/duo-module-01
[2] https://github.com/milkv-duo/duo-buildroot-sdk-v2/releases/
[3] https://github.com/sophgo/sophgo-doc/releases/download/sg2000-trm-v1.01/sg2000_trm_en.pdf
Alexander Sverdlin (7):
riscv: dts: sophgo: cv18xx: Move RiscV-specific part into SoCs' .dtsi
files
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add
SG2000
arm64: dts: sophgo: Add initial SG2000 SoC device tree
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: Add SOPHGO SOC family Kconfig support
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
.../{riscv => soc/sophgo}/sophgo.yaml | 7 +-
arch/arm64/Kconfig.platforms | 6 ++
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/sophgo/Makefile | 2 +
.../sophgo/sg2000-milkv-duo-module-01-evb.dts | 31 +++++++
.../sophgo/sg2000-milkv-duo-module-01.dtsi | 85 +++++++++++++++++
arch/arm64/boot/dts/sophgo/sg2000.dtsi | 75 +++++++++++++++
arch/arm64/configs/defconfig | 4 +
arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 28 +++---
arch/riscv/boot/dts/sophgo/cv1812h.dtsi | 28 +++---
arch/riscv/boot/dts/sophgo/cv181x.dtsi | 2 +-
arch/riscv/boot/dts/sophgo/cv18xx-cpu.dtsi | 36 ++++++++
arch/riscv/boot/dts/sophgo/cv18xx-intc.dtsi | 23 +++++
arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 91 +++++--------------
arch/riscv/boot/dts/sophgo/sg2002.dtsi | 34 ++++---
15 files changed, 347 insertions(+), 106 deletions(-)
rename Documentation/devicetree/bindings/{riscv => soc/sophgo}/sophgo.yaml (80%)
create mode 100644 arch/arm64/boot/dts/sophgo/Makefile
create mode 100644 arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts
create mode 100644 arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01.dtsi
create mode 100644 arch/arm64/boot/dts/sophgo/sg2000.dtsi
create mode 100644 arch/riscv/boot/dts/sophgo/cv18xx-cpu.dtsi
create mode 100644 arch/riscv/boot/dts/sophgo/cv18xx-intc.dtsi
--
2.48.1
next reply other threads:[~2025-02-12 22:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-12 22:43 Alexander Sverdlin [this message]
2025-02-12 22:43 ` [PATCH v3 1/7] riscv: dts: sophgo: cv18xx: Move RiscV-specific part into SoCs' .dtsi files Alexander Sverdlin
2025-02-12 22:54 ` Inochi Amaoto
2025-02-12 23:04 ` Alexander Sverdlin
2025-02-12 23:28 ` Inochi Amaoto
2025-02-12 22:43 ` [PATCH v3 2/7] dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000 Alexander Sverdlin
2025-02-12 22:43 ` [PATCH v3 3/7] arm64: dts: sophgo: Add initial SG2000 SoC device tree Alexander Sverdlin
2025-02-12 22:43 ` [PATCH v3 4/7] arm64: dts: sophgo: Add Duo Module 01 Alexander Sverdlin
2025-02-12 22:43 ` [PATCH v3 5/7] arm64: dts: sophgo: Add Duo Module 01 Evaluation Board Alexander Sverdlin
2025-02-12 22:43 ` [PATCH v3 6/7] arm64: Add SOPHGO SOC family Kconfig support Alexander Sverdlin
2025-02-12 22:43 ` [PATCH v3 7/7] arm64: defconfig: Enable rudimentary Sophgo SG2000 support Alexander Sverdlin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250212224347.1767819-1-alexander.sverdlin@gmail.com \
--to=alexander.sverdlin@gmail.com \
--cc=aou@eecs.berkeley.edu \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=chao.wei@sophgo.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heylenay@outlook.com \
--cc=inochiama@outlook.com \
--cc=jszhang@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=soc@lists.linux.dev \
--cc=sre@kernel.org \
--cc=unicorn_wang@outlook.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox