From: Peter Chen <peter.chen@cixtech.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
catalin.marinas@arm.com, will@kernel.org, arnd@arndb.de
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, cix-kernel-upstream@cixtech.com,
marcin@juszkiewicz.com.pl, Peter Chen <peter.chen@cixtech.com>,
Fugang Duan <fugang.duan@cixtech.com>
Subject: [PATCH v2 6/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support
Date: Wed, 26 Feb 2025 09:21:36 +0800 [thread overview]
Message-ID: <20250226012136.854614-7-peter.chen@cixtech.com> (raw)
In-Reply-To: <20250226012136.854614-1-peter.chen@cixtech.com>
CIX SKY1 SoC is high performance Armv9 SoC designed by Cixtech,
and Orion O6 is open source motherboard launched by Radxa.
See below for detail:
https://docs.radxa.com/en/orion/o6/getting-started/introduction
In this commit, it only adds limited components for running initramfs
at Orion O6.
Acked-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
---
Changes for v2:
- Corrects the SoF tag's name
- Fix several coding sytle issues
- move linux,cma node to dts file
- delete memory node, memory size is passed by firmware
- delete uart2 node which will be added in future patches
- Improve for pmu and cpu node to stands for more specific cpu model
- Improve the timer node and add hypervisor virtual timer irq
- Pass "make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb"
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/cix/Makefile | 2 +
arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 26 +++
arch/arm64/boot/dts/cix/sky1.dtsi | 217 ++++++++++++++++++++++
4 files changed, 246 insertions(+)
create mode 100644 arch/arm64/boot/dts/cix/Makefile
create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts
create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 79b73a21ddc2..8e7ccd0027bd 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -13,6 +13,7 @@ subdir-y += bitmain
subdir-y += blaize
subdir-y += broadcom
subdir-y += cavium
+subdir-y += cix
subdir-y += exynos
subdir-y += freescale
subdir-y += hisilicon
diff --git a/arch/arm64/boot/dts/cix/Makefile b/arch/arm64/boot/dts/cix/Makefile
new file mode 100644
index 000000000000..ed3713982012
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
new file mode 100644
index 000000000000..78f4fcd87216
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "sky1.dtsi"
+/ {
+ model = "Radxa Orion O6";
+ compatible = "radxa,orion-o6", "cix,sky1";
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x28000000>;
+ linux,cma-default;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
new file mode 100644
index 000000000000..709512fafe51
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu2: cpu@200 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x200>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu3: cpu@300 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x300>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu4: cpu@400 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x400>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu5: cpu@500 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x500>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu6: cpu@600 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x600>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu7: cpu@700 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x700>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu8: cpu@800 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x800>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu9: cpu@900 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x900>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu10: cpu@a00 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0xa00>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu11: cpu@b00 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0xb00>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ core4 {
+ cpu = <&cpu4>;
+ };
+ core5 {
+ cpu = <&cpu5>;
+ };
+ core6 {
+ cpu = <&cpu6>;
+ };
+ core7 {
+ cpu = <&cpu7>;
+ };
+ core8 {
+ cpu = <&cpu8>;
+ };
+ core9 {
+ cpu = <&cpu9>;
+ };
+ core10 {
+ cpu = <&cpu10>;
+ };
+ core11 {
+ cpu = <&cpu11>;
+ };
+ };
+ };
+
+ };
+
+ pmu-a520 {
+ compatible = "arm,cortex-a520-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu-a720 {
+ compatible = "arm,cortex-a720-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu-spe {
+ compatible = "arm,statistical-profiling-extension-v1";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x20 0>;
+ dma-ranges;
+
+ gic: interrupt-controller@e010000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x0e010000 0 0x10000>, /* GICD */
+ <0x0 0x0e090000 0 0x300000>; /* GICR * 12 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0 0x40000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic_its: msi-controller@e050000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0x0e050000 0x0 0x30000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+ clock-frequency = <1000000000>;
+ arm,no-tick-in-suspend;
+ };
+};
--
2.25.1
next prev parent reply other threads:[~2025-02-26 1:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-26 1:21 [PATCH v2 0/6] arm64: Introduce CIX P1 (SKY1) SoC Peter Chen
2025-02-26 1:21 ` [PATCH v2 1/6] dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd Peter Chen
2025-02-26 7:02 ` Krzysztof Kozlowski
2025-02-26 10:31 ` Krzysztof Kozlowski
2025-02-26 1:21 ` [PATCH v2 2/6] dt-bindings: arm: add CIX P1 (SKY1) SoC Peter Chen
2025-02-26 7:02 ` Krzysztof Kozlowski
2025-02-26 8:09 ` Peter Chen
2025-02-26 8:40 ` Krzysztof Kozlowski
2025-02-26 10:26 ` Peter Chen
2025-02-26 10:30 ` Krzysztof Kozlowski
2025-02-26 12:59 ` Peter Chen
2025-02-26 1:21 ` [PATCH v2 3/6] MAINTAINERS: Add CIX SoC maintainer entry Peter Chen
2025-02-26 1:21 ` [PATCH v2 4/6] arm64: Kconfig: add ARCH_CIX for cix silicons Peter Chen
2025-02-26 1:21 ` [PATCH v2 5/6] arm64: defconfig: Enable CIX SoC Peter Chen
2025-02-26 1:21 ` Peter Chen [this message]
2025-02-26 7:05 ` [PATCH v2 6/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support Krzysztof Kozlowski
2025-02-27 4:52 ` [PATCH v2 0/6] arm64: Introduce CIX P1 (SKY1) SoC Jianfeng Liu
2025-02-27 8:02 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250226012136.854614-7-peter.chen@cixtech.com \
--to=peter.chen@cixtech.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fugang.duan@cixtech.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcin@juszkiewicz.com.pl \
--cc=robh@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).