[PATCH] irq: imx-irqsteer: irq_count can larger than registered irq

[Jacky Bai <ping.bai@nxp.com>]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

The irqsteer IP itself can support up to 5 channels and each
channel can support max 960 IRQs per. The actual number of
channels and IRQ per channel implemented in HW is SoC related.

For previous i.MX SoCs, normally only one channel and max 512
IRQ is implemented, But for i.MX94, the irqsteer HW is implemented
for 960 IRQs, even it only has 384 IRQs connected.

That means on i.MX94, the 'irq_number' is 6 but the 'irq_count' is
15, so we need to increase the CHAN_MAX_OUTPUT_INT to 0xF(960 / 64)
to make sure the irqsteer can work correctly on i.MX94.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/irqchip/irq-imx-irqsteer.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
index b0e9788c0045..afbfcce3b1e3 100644
--- a/drivers/irqchip/irq-imx-irqsteer.c
+++ b/drivers/irqchip/irq-imx-irqsteer.c
@@ -24,7 +24,7 @@
 #define CHAN_MINTDIS(t)		(CTRL_STRIDE_OFF(t, 3) + 0x4)
 #define CHAN_MASTRSTAT(t)	(CTRL_STRIDE_OFF(t, 3) + 0x8)
 
-#define CHAN_MAX_OUTPUT_INT	0x8
+#define CHAN_MAX_OUTPUT_INT	0xF
 
 struct irqsteer_data {
 	void __iomem		*regs;
@@ -228,10 +228,8 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
 
 	for (i = 0; i < data->irq_count; i++) {
 		data->irq[i] = irq_of_parse_and_map(np, i);
-		if (!data->irq[i]) {
-			ret = -EINVAL;
-			goto out;
-		}
+		if (!data->irq[i])
+			break;
 
 		irq_set_chained_handler_and_data(data->irq[i],
 						 imx_irqsteer_irq_handler,
@@ -254,9 +252,13 @@ static void imx_irqsteer_remove(struct platform_device *pdev)
 	struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev);
 	int i;
 
-	for (i = 0; i < irqsteer_data->irq_count; i++)
+	for (i = 0; i < irqsteer_data->irq_count; i++) {
+		if (!irqsteer_data->irq[i])
+			break;
+
 		irq_set_chained_handler_and_data(irqsteer_data->irq[i],
 						 NULL, NULL);
+	}
 
 	irq_domain_remove(irqsteer_data->domain);
 
-- 
2.34.1