[PATCH v4 2/8] pinctrl: sunxi: increase number of GPIO bank regulators

[Andre Przywara <andre.przywara@arm.com>]

By design, the Allwinner pinctrl IP always supported up to 11 GPIO banks,
though no SoC ever used more than 9 banks so far.
The Allwinner A523 has pins in all 11 banks, which exceeds the number of
per-bank regulators that we currently support, as this was set to 9.

Increase the size of the array to hold up to 11 regulator structs, to
support pins in bank J and K as well.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/pinctrl/sunxi/pinctrl-sunxi.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index 8e2eca45b57f8..fbbf070a87542 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -155,7 +155,7 @@ struct sunxi_pinctrl {
 	struct gpio_chip		*chip;
 	const struct sunxi_pinctrl_desc	*desc;
 	struct device			*dev;
-	struct sunxi_pinctrl_regulator	regulators[9];
+	struct sunxi_pinctrl_regulator	regulators[11];
 	struct irq_domain		*domain;
 	struct sunxi_pinctrl_function	*functions;
 	unsigned			nfunctions;
-- 
2.46.3