[PATCH v4 13/14] clk: sunxi-ng: a523: add reset lines

[Andre Przywara <andre.przywara@arm.com>]

Allwinner SoCs do not contain a separate reset controller, instead the
reset lines for the various devices are integrated into the "BGR" (Bus
Gate / Reset) registers, for each device group: one for all UARTs, one
for all SPI interfaces, and so on.
The Allwinner CCU driver also doubles as a reset provider, and since the
reset lines are indeed just single bits in those BGR register, we can
represent them easily in an array of structs, just containing the
register offset and the bit number.

Add the location of the reset bits for all devices in the A523/T527
SoCs, using the existing sunxi CCU infrastructure.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/clk/sunxi-ng/ccu-sun55i-a523.c | 84 ++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
index 736544f6a1415..9efb9fd24b424 100644
--- a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
+++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
@@ -1526,11 +1526,95 @@ static struct clk_hw_onecell_data sun55i_a523_hw_clks = {
 	},
 };
 
+static struct ccu_reset_map sun55i_a523_ccu_resets[] = {
+	[RST_MBUS]		= { 0x540, BIT(30) },
+	[RST_BUS_NSI]		= { 0x54c, BIT(16) },
+	[RST_BUS_DE]		= { 0x60c, BIT(16) },
+	[RST_BUS_DI]		= { 0x62c, BIT(16) },
+	[RST_BUS_G2D]		= { 0x63c, BIT(16) },
+	[RST_BUS_SYS]		= { 0x64c, BIT(16) },
+	[RST_BUS_GPU]		= { 0x67c, BIT(16) },
+	[RST_BUS_CE]		= { 0x68c, BIT(16) },
+	[RST_BUS_SYS_CE]	= { 0x68c, BIT(17) },
+	[RST_BUS_VE]		= { 0x69c, BIT(16) },
+	[RST_BUS_DMA]		= { 0x70c, BIT(16) },
+	[RST_BUS_MSGBOX]	= { 0x71c, BIT(16) },
+	[RST_BUS_SPINLOCK]	= { 0x72c, BIT(16) },
+	[RST_BUS_CPUXTIMER]	= { 0x74c, BIT(16) },
+	[RST_BUS_DBG]		= { 0x78c, BIT(16) },
+	[RST_BUS_PWM0]		= { 0x7ac, BIT(16) },
+	[RST_BUS_PWM1]		= { 0x7ac, BIT(17) },
+	[RST_BUS_DRAM]		= { 0x80c, BIT(16) },
+	[RST_BUS_NAND]		= { 0x82c, BIT(16) },
+	[RST_BUS_MMC0]		= { 0x84c, BIT(16) },
+	[RST_BUS_MMC1]		= { 0x84c, BIT(17) },
+	[RST_BUS_MMC2]		= { 0x84c, BIT(18) },
+	[RST_BUS_SYSDAP]	= { 0x88c, BIT(16) },
+	[RST_BUS_UART0]		= { 0x90c, BIT(16) },
+	[RST_BUS_UART1]		= { 0x90c, BIT(17) },
+	[RST_BUS_UART2]		= { 0x90c, BIT(18) },
+	[RST_BUS_UART3]		= { 0x90c, BIT(19) },
+	[RST_BUS_UART4]		= { 0x90c, BIT(20) },
+	[RST_BUS_UART5]		= { 0x90c, BIT(21) },
+	[RST_BUS_UART6]		= { 0x90c, BIT(22) },
+	[RST_BUS_UART7]		= { 0x90c, BIT(23) },
+	[RST_BUS_I2C0]		= { 0x91c, BIT(16) },
+	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
+	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
+	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_I2C4]		= { 0x91c, BIT(20) },
+	[RST_BUS_I2C5]		= { 0x91c, BIT(21) },
+	[RST_BUS_CAN]		= { 0x92c, BIT(16) },
+	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
+	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
+	[RST_BUS_SPI2]		= { 0x96c, BIT(18) },
+	[RST_BUS_SPIFC]		= { 0x96c, BIT(19) },
+	[RST_BUS_EMAC0]		= { 0x97c, BIT(16) },
+	[RST_BUS_EMAC1]		= { 0x98c, BIT(16) | BIT(17) },	/* GMAC1-AXI */
+	[RST_BUS_IR_RX]		= { 0x99c, BIT(16) },
+	[RST_BUS_IR_TX]		= { 0x9cc, BIT(16) },
+	[RST_BUS_GPADC0]	= { 0x9ec, BIT(16) },
+	[RST_BUS_GPADC1]	= { 0x9ec, BIT(17) },
+	[RST_BUS_THS]		= { 0x9fc, BIT(16) },
+	[RST_USB_PHY0]		= { 0xa70, BIT(30) },
+	[RST_USB_PHY1]		= { 0xa74, BIT(30) },
+	[RST_BUS_OHCI0]		= { 0xa8c, BIT(16) },
+	[RST_BUS_OHCI1]		= { 0xa8c, BIT(17) },
+	[RST_BUS_EHCI0]		= { 0xa8c, BIT(20) },
+	[RST_BUS_EHCI1]		= { 0xa8c, BIT(21) },
+	[RST_BUS_OTG]		= { 0xa8c, BIT(24) },
+	[RST_BUS_3]		= { 0xa8c, BIT(25) },	/* BSP + register */
+	[RST_BUS_LRADC]		= { 0xa9c, BIT(16) },
+	[RST_BUS_PCIE_USB3]	= { 0xaac, BIT(16) },
+	[RST_BUS_DISPLAY0_TOP]	= { 0xabc, BIT(16) },
+	[RST_BUS_DISPLAY1_TOP]	= { 0xacc, BIT(16) },
+	[RST_BUS_HDMI_MAIN]	= { 0xb1c, BIT(16) },
+	[RST_BUS_HDMI_SUB]	= { 0xb1c, BIT(17) },
+	[RST_BUS_MIPI_DSI0]	= { 0xb4c, BIT(16) },
+	[RST_BUS_MIPI_DSI1]	= { 0xb4c, BIT(17) },
+	[RST_BUS_TCON_LCD0]	= { 0xb7c, BIT(16) },
+	[RST_BUS_TCON_LCD1]	= { 0xb7c, BIT(17) },
+	[RST_BUS_TCON_LCD2]	= { 0xb7c, BIT(18) },
+	[RST_BUS_TCON_TV0]	= { 0xb9c, BIT(16) },
+	[RST_BUS_TCON_TV1]	= { 0xb9c, BIT(17) },
+	[RST_BUS_LVDS0]		= { 0xbac, BIT(16) },
+	[RST_BUS_LVDS1]		= { 0xbac, BIT(17) },
+	[RST_BUS_EDP]		= { 0xbbc, BIT(16) },
+	[RST_BUS_VIDEO_OUT0]	= { 0xbcc, BIT(16) },
+	[RST_BUS_VIDEO_OUT1]	= { 0xbcc, BIT(17) },
+	[RST_BUS_LEDC]		= { 0xbfc, BIT(16) },
+	[RST_BUS_CSI]		= { 0xc1c, BIT(16) },
+	[RST_BUS_ISP]		= { 0xc2c, BIT(16) },	/* BSP + register */
+};
+
 static const struct sunxi_ccu_desc sun55i_a523_ccu_desc = {
 	.ccu_clks	= sun55i_a523_ccu_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun55i_a523_ccu_clks),
 
 	.hw_clks	= &sun55i_a523_hw_clks,
+
+	.resets		= sun55i_a523_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun55i_a523_ccu_resets),
 };
 
 static const u32 pll_regs[] = {
-- 
2.46.3