Re: [net-next PATCH v12 04/13] dt-bindings: net: Document support for AN8855 Switch Internal PHY

[Rob Herring <robh@kernel.org>]

On Sun, Mar 09, 2025 at 06:26:49PM +0100, Christian Marangi wrote:
> Document support for AN8855 Switch Internal PHY.
> 
> Airoha AN8855 is a 5-port Gigabit Switch that expose the Internal
> PHYs on the MDIO bus.
> 
> Each PHY might need to be calibrated to correctly work with the
> use of the eFUSE provided by the Switch SoC. This can be enabled by
> defining in the PHY node the "airoha,ext-surge" property.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  .../bindings/net/airoha,an8855-phy.yaml       | 93 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 94 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/airoha,an8855-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/airoha,an8855-phy.yaml b/Documentation/devicetree/bindings/net/airoha,an8855-phy.yaml
> new file mode 100644
> index 000000000000..301c46f84904
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/airoha,an8855-phy.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/airoha,an8855-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha AN8855 Switch Internal PHY
> +
> +maintainers:
> +  - Christian Marangi <ansuelsmth@gmail.com>
> +
> +description: >
> +  Airoha AN8855 is a 5-port Gigabit Switch that expose the Internal
> +  PHYs on the MDIO bus.
> +
> +  Each PHY might need to be calibrated to correctly work with the
> +  use of the eFUSE provided by the Switch SoC.
> +
> +allOf:
> +  - $ref: ethernet-phy.yaml#
> +
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - ethernet-phy-idc0ff.0410
> +  required:
> +    - compatible
> +
> +properties:
> +  reg:
> +    maxItems: 1
> +
> +  airoha,ext-surge:
> +    description: enable PHY calibration with the use of SoC eFUSE.

Wouldn't nvmem-cells presence enable this?

> +
> +  nvmem-cells:
> +    items:
> +      - description: phandle to SoC eFUSE tx_a
> +      - description: phandle to SoC eFUSE tx_b
> +      - description: phandle to SoC eFUSE tx_c
> +      - description: phandle to SoC eFUSE tx_d
> +
> +  nvmem-cell-names:
> +    items:
> +      - const: tx_a
> +      - const: tx_b
> +      - const: tx_c
> +      - const: tx_d
> +
> +required:
> +  - compatible
> +  - reg
> +
> +if:
> +  required:
> +    - airoha,ext-surge
> +then:
> +  required:
> +    - nvmem-cells
> +    - nvmem-cell-names

dependentRequired:
  airoha,ext-surge: [ nvmem-cells, nvmem-cell-names ]

> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    mdio {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ethernet-phy@1 {
> +            compatible = "ethernet-phy-idc0ff.0410",
> +                         "ethernet-phy-ieee802.3-c45";
> +
> +            reg = <1>;
> +        };
> +
> +        ethernet-phy@2 {
> +            compatible = "ethernet-phy-idc0ff.0410",
> +                         "ethernet-phy-ieee802.3-c45";
> +
> +            reg = <2>;
> +
> +            airoha,ext-surge;
> +
> +            nvmem-cells = <&shift_sel_port0_tx_a>,
> +                <&shift_sel_port0_tx_b>,
> +                <&shift_sel_port0_tx_c>,
> +                <&shift_sel_port0_tx_d>;
> +            nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 696ad8465ea8..45f4bb8deb0d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -726,6 +726,7 @@ L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
>  L:	netdev@vger.kernel.org
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/net/airoha,an8855-mdio.yaml
> +F:	Documentation/devicetree/bindings/net/airoha,an8855-phy.yaml
>  F:	Documentation/devicetree/bindings/net/dsa/airoha,an8855-switch.yaml
>  F:	Documentation/devicetree/bindings/nvmem/airoha,an8855-efuse.yaml
>  
> -- 
> 2.48.1
>