[PATCH v12 10/13] PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset

[Bjorn Helgaas <helgaas@kernel.org>]

From: Frank Li <Frank.Li@nxp.com>

                   Endpoint
  ┌───────────────────────────────────────────────┐
  │                             pcie-ep@5f010000  │
  │                             ┌────────────────┐│
  │                             │   Endpoint     ││
  │                             │   PCIe         ││
  │                             │   Controller   ││
  │           bus@5f000000      │             ┌────────►
  │           ┌──────────┐      │             │  ││dynamically
  │           │          │ Outbound Transfer  │  ││allocated
  │┌─────┐    │  Bus     ┼─────►│ ATU  ───────┘  ││PCI Addr
  ││     │    │  Fabric  │Bus   │                ││
  ││ CPU ├───►│          │Addr  │                ││
  ││     │CPU │          │0x8000_0000            ││
  │└─────┘Addr└──────────┘      │                ││
  │       0x7000_0000           └────────────────┘│
  └───────────────────────────────────────────────┘

  bus@5f000000 {
          compatible = "simple-bus";
          ranges = <0x80000000 0x0 0x70000000 0x10000000>;

          pcie-ep@5f010000 {
                  reg = <0x80000000 0x10000000>;
                  reg-names ="addr_space";
                  ...
          };
          ...
  };

In the diagram above, CPU writes data to outbound window address
0x7000_0000, and the bus fabric maps it to 0x8000_0000. The ATU uses
bus address 0x8000_0000 as input address and maps to some PCI address
dynamically allocated by a PCI device driver on the host side.

The pcie-ep@5f010000 'reg[addr_space]' is the parent bus address of the
PCIe controller input, including the ATU.

Set parent_bus_offset, the offset from the CPU address to the PCIe
controller input address using dw_pcie_init_parent_bus_offset().  The
parent_bus_offset is not used yet, so no functional change intended.

Link: https://lore.kernel.org/r/20250313-pci_fixup_addr-v11-7-01d2313502ab@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 2db834345ec2..bb87d0c5c665 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -904,6 +904,13 @@ static int dw_pcie_ep_get_resources(struct dw_pcie_ep *ep)
 	ep->phys_base = res->start;
 	ep->addr_size = resource_size(res);
 
+	/*
+	 * artpec6_pcie_cpu_addr_fixup() uses ep->phys_base, so call
+	 * dw_pcie_parent_bus_offset() after setting ep->phys_base.
+	 */
+	pci->parent_bus_offset = dw_pcie_parent_bus_offset(pci, "addr_space",
+							   ep->phys_base);
+
 	ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
 	if (ret < 0)
 		epc->max_functions = 1;
-- 
2.34.1