public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: broonie@kernel.org,catalin.marinas@arm.com,gregkh@linuxfoundation.org,joey.gouly@arm.com,kvmarm@lists.linux.dev,linux-arm-kernel@lists.infradead.org,mark.rutland@arm.com,maz@kernel.org,oliver.upton@linux.dev,suzuki.poulose@arm.com,tabba@google.com,will@kernel.org
Cc: <stable-commits@vger.kernel.org>
Subject: Patch "KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN" has been added to the 6.12-stable tree
Date: Mon, 24 Mar 2025 11:59:05 -0700	[thread overview]
Message-ID: <2025032405-rumble-backroom-ccb8@gregkh> (raw)
In-Reply-To: <20250321-stable-sve-6-12-v2-5-417ca2278d18@kernel.org>


This is a note to let you know that I've just added the patch titled

    KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN

to the 6.12-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     kvm-arm64-remove-vhe-host-restore-of-cpacr_el1.smen.patch
and it can be found in the queue-6.12 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


From stable+bounces-125711-greg=kroah.com@vger.kernel.org Thu Mar 20 17:15:08 2025
From: Mark Brown <broonie@kernel.org>
Date: Fri, 21 Mar 2025 00:13:01 +0000
Subject: KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,  Marc Zyngier <maz@kernel.org>, Oliver Upton <oliver.upton@linux.dev>,  Joey Gouly <joey.gouly@arm.com>, Suzuki K Poulose <suzuki.poulose@arm.com>,  Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev,  linux-kernel@vger.kernel.org, stable@vger.kernel.org,  Mark Brown <broonie@kernel.org>, Mark Rutland <mark.rutland@arm.com>,  Fuad Tabba <tabba@google.com>
Message-ID: <20250321-stable-sve-6-12-v2-5-417ca2278d18@kernel.org>

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 407a99c4654e8ea65393f412c421a55cac539f5b ]

When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.SMEN (i.e. CPTR_EL2.SMEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic
has historically been broken, and is currently redundant.

This logic was originally introduced in commit:

  861262ab86270206 ("KVM: arm64: Handle SME host state when running guests")

At the time, the VHE hyp code would reset CPTR_EL2.SMEN to 0b00 when
returning to the host, trapping host access to SME state. Unfortunately,
this was unsafe as the host could take a softirq before calling
kvm_arch_vcpu_put_fp(), and if a softirq handler were to use kernel mode
NEON the resulting attempt to save the live FPSIMD/SVE/SME state would
result in a fatal trap.

That issue was limited to VHE mode. For nVHE/hVHE modes, KVM always
saved/restored the host kernel's CPACR_EL1 value, and configured
CPTR_EL2.TSM to 0b0, ensuring that host usage of SME would not be
trapped.

The issue above was incidentally fixed by commit:

  375110ab51dec5dc ("KVM: arm64: Fix resetting SME trap values on reset for (h)VHE")

That commit changed the VHE hyp code to configure CPTR_EL2.SMEN to 0b01
when returning to the host, permitting host kernel usage of SME,
avoiding the issue described above. At the time, this was not identified
as a fix for commit 861262ab86270206.

Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SME trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.

Remove the redundant logic.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Update for rework of flags storage -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/kvm_host.h |    2 --
 arch/arm64/kvm/fpsimd.c           |   21 ---------------------
 2 files changed, 23 deletions(-)

--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -891,8 +891,6 @@ struct kvm_vcpu_arch {
 /* Save TRBE context if active  */
 #define DEBUG_STATE_SAVE_TRBE	__vcpu_single_flag(iflags, BIT(6))
 
-/* SME enabled for EL0 */
-#define HOST_SME_ENABLED	__vcpu_single_flag(sflags, BIT(1))
 /* Physical CPU not in supported_cpus */
 #define ON_UNSUPPORTED_CPU	__vcpu_single_flag(sflags, BIT(2))
 /* WFIT instruction trapped */
--- a/arch/arm64/kvm/fpsimd.c
+++ b/arch/arm64/kvm/fpsimd.c
@@ -65,12 +65,6 @@ void kvm_arch_vcpu_load_fp(struct kvm_vc
 	fpsimd_save_and_flush_cpu_state();
 	*host_data_ptr(fp_owner) = FP_STATE_FREE;
 
-	if (system_supports_sme()) {
-		vcpu_clear_flag(vcpu, HOST_SME_ENABLED);
-		if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN)
-			vcpu_set_flag(vcpu, HOST_SME_ENABLED);
-	}
-
 	/*
 	 * If normal guests gain SME support, maintain this behavior for pKVM
 	 * guests, which don't support SME.
@@ -141,21 +135,6 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcp
 
 	local_irq_save(flags);
 
-	/*
-	 * If we have VHE then the Hyp code will reset CPACR_EL1 to
-	 * the default value and we need to reenable SME.
-	 */
-	if (has_vhe() && system_supports_sme()) {
-		/* Also restore EL0 state seen on entry */
-		if (vcpu_get_flag(vcpu, HOST_SME_ENABLED))
-			sysreg_clear_set(CPACR_EL1, 0, CPACR_ELx_SMEN);
-		else
-			sysreg_clear_set(CPACR_EL1,
-					 CPACR_EL1_SMEN_EL0EN,
-					 CPACR_EL1_SMEN_EL1EN);
-		isb();
-	}
-
 	if (guest_owns_fp_regs()) {
 		if (vcpu_has_sve(vcpu)) {
 			u64 zcr = read_sysreg_el1(SYS_ZCR);


Patches currently in stable-queue which might be from broonie@kernel.org are

queue-6.12/kvm-arm64-calculate-cptr_el2-traps-on-activating-traps.patch
queue-6.12/regulator-check-that-dummy-regulator-has-been-probed-before-using-it.patch
queue-6.12/kvm-arm64-eagerly-switch-zcr_el-1-2.patch
queue-6.12/kvm-arm64-mark-some-header-functions-as-inline.patch
queue-6.12/kvm-arm64-remove-host-fpsimd-saving-for-non-protected-kvm.patch
queue-6.12/regulator-dummy-force-synchronous-probing.patch
queue-6.12/kvm-arm64-refactor-exit-handlers.patch
queue-6.12/kvm-arm64-unconditionally-save-flush-host-fpsimd-sve-sme-state.patch
queue-6.12/kvm-arm64-remove-vhe-host-restore-of-cpacr_el1.smen.patch
queue-6.12/kvm-arm64-remove-vhe-host-restore-of-cpacr_el1.zen.patch


  reply	other threads:[~2025-03-24 19:37 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-21  0:12 [PATCH 6.12 v2 0/8] KVM: arm64: Backport of SVE fixes to v6.12 Mark Brown
2025-03-21  0:12 ` [PATCH 6.12 v2 1/8] KVM: arm64: Calculate cptr_el2 traps on activating traps Mark Brown
2025-03-24 18:59   ` Patch "KVM: arm64: Calculate cptr_el2 traps on activating traps" has been added to the 6.12-stable tree gregkh
2025-03-21  0:12 ` [PATCH 6.12 v2 2/8] KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state Mark Brown
2025-03-24 18:59   ` Patch "KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state" has been added to the 6.12-stable tree gregkh
2025-03-21  0:12 ` [PATCH 6.12 v2 3/8] KVM: arm64: Remove host FPSIMD saving for non-protected KVM Mark Brown
2025-03-21  0:21   ` Mark Brown
2025-03-24 18:59   ` Patch "KVM: arm64: Remove host FPSIMD saving for non-protected KVM" has been added to the 6.12-stable tree gregkh
2025-03-21  0:13 ` [PATCH 6.12 v2 4/8] KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN Mark Brown
2025-03-24 18:59   ` Patch "KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN" has been added to the 6.12-stable tree gregkh
2025-03-21  0:13 ` [PATCH 6.12 v2 5/8] KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN Mark Brown
2025-03-24 18:59   ` gregkh [this message]
2025-03-21  0:13 ` [PATCH 6.12 v2 6/8] KVM: arm64: Refactor exit handlers Mark Brown
2025-03-24 18:59   ` Patch "KVM: arm64: Refactor exit handlers" has been added to the 6.12-stable tree gregkh
2025-03-21  0:13 ` [PATCH 6.12 v2 7/8] KVM: arm64: Mark some header functions as inline Mark Brown
2025-03-24 18:59   ` Patch "KVM: arm64: Mark some header functions as inline" has been added to the 6.12-stable tree gregkh
2025-03-21  0:13 ` [PATCH 6.12 v2 8/8] KVM: arm64: Eagerly switch ZCR_EL{1,2} Mark Brown
2025-03-24 18:59   ` Patch "KVM: arm64: Eagerly switch ZCR_EL{1,2}" has been added to the 6.12-stable tree gregkh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2025032405-rumble-backroom-ccb8@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=joey.gouly@arm.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=oliver.upton@linux.dev \
    --cc=stable-commits@vger.kernel.org \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox