Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Pankaj Gupta <pankaj.gupta@nxp.com>
To: Jonathan Corbet <corbet@lwn.net>, Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>,
	Pankaj Gupta <pankaj.gupta@nxp.com>
Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	 devicetree@vger.kernel.org, imx@lists.linux.dev,
	 linux-arm-kernel@lists.infradead.org
Subject: [PATCH v14 3/6] arm64: dts: imx8ulp-evk: add nxp secure enclave firmware
Date: Thu, 27 Mar 2025 00:07:59 +0530	[thread overview]
Message-ID: <20250327-imx-se-if-v14-3-2219448932e4@nxp.com> (raw)
In-Reply-To: <20250327-imx-se-if-v14-0-2219448932e4@nxp.com>

Add support for NXP secure enclave called EdgeLock Enclave
firmware (se-fw) for imx8ulp-evk.

EdgeLock Enclave has a hardware limitation of restricted access to DDR
address: 0x80000000 to 0xafffffff, so reserve 1MB of DDR memory region
from 0x80000000.

Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
---
changes from v13 to v14
- added the blank line.
- removed the lines: #address-cells = <1>; , #size-cells = <0>;
- moved the ele-reserved under the parent node "reserved-memory".
- rename the node name "ele-reserved" to general name "memory".
---
 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 12 +++++++++++-
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi    | 11 +++++++++--
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index 290a49bea2f7..10aaf02f8ea7 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2021 NXP
+ * Copyright 2021, 2025 NXP
  */
 
 /dts-v1/;
@@ -37,6 +37,12 @@ linux,cma {
 			linux,cma-default;
 		};
 
+		ele_reserved: memory@90000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90000000 0 0x100000>;
+			no-map;
+		};
+
 		m33_reserved: noncacheable-section@a8600000 {
 			reg = <0 0xa8600000 0 0x1000000>;
 			no-map;
@@ -259,6 +265,10 @@ &usdhc0 {
 	status = "okay";
 };
 
+&hsm0 {
+	memory-region = <&ele_reserved>;
+};
+
 &fec {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_enet>;
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 2562a35286c2..05db47668b7e 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2021 NXP
+ * Copyright 2021, 2025 NXP
  */
 
 #include <dt-bindings/clock/imx8ulp-clock.h>
@@ -154,7 +154,7 @@ sosc: clock-sosc {
 		#clock-cells = <0>;
 	};
 
-	sram@2201f000 {
+	sram0: sram@2201f000 {
 		compatible = "mmio-sram";
 		reg = <0x0 0x2201f000 0x0 0x1000>;
 
@@ -186,6 +186,13 @@ scmi_sensor: protocol@15 {
 				#thermal-sensor-cells = <1>;
 			};
 		};
+
+		hsm0: secure-enclave {
+			 compatible = "fsl,imx8ulp-se-ele-hsm";
+			 mbox-names = "tx", "rx";
+			 mboxes = <&s4muap 0 0>, <&s4muap 1 0>;
+			 sram = <&sram0>;
+		 };
 	};
 
 	cm33: remoteproc-cm33 {

-- 
2.43.0



  parent reply	other threads:[~2025-03-26 13:53 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-26 18:37 [PATCH v14 0/6] v14: firmware: imx: driver for NXP secure-enclave Pankaj Gupta
2025-03-26 15:04 ` Frank Li
2025-03-26 18:37 ` [PATCH v14 1/6] Documentation/firmware: add imx/se to other_interfaces Pankaj Gupta
2025-03-26 18:37 ` [PATCH v14 2/6] dt-bindings: arm: fsl: add imx-se-fw binding doc Pankaj Gupta
2025-03-26 18:37 ` Pankaj Gupta [this message]
2025-03-26 15:03   ` [PATCH v14 3/6] arm64: dts: imx8ulp-evk: add nxp secure enclave firmware Frank Li
2025-03-26 18:38 ` [PATCH v14 4/6] firmware: imx: add driver for NXP EdgeLock Enclave Pankaj Gupta
2025-03-26 15:33   ` Frank Li
2025-04-01 11:51     ` Pankaj Gupta
     [not found]     ` <AM9PR04MB86040127423D0A657103589D95AC2@AM9PR04MB8604.eurprd04.prod.outlook.com>
2025-04-02  6:14       ` Pankaj Gupta
     [not found]     ` <AM9PR04MB86048345C11F8878146AFE9A95AC2@AM9PR04MB8604.eurprd04.prod.outlook.com>
2025-04-02  6:15       ` Pankaj Gupta
     [not found]     ` <AM9PR04MB8604C02C27C8C43FF89B95DC95AC2@AM9PR04MB8604.eurprd04.prod.outlook.com>
2025-04-02  6:15       ` Pankaj Gupta
2025-04-02 21:20         ` Frank Li
2025-04-03  5:02           ` Pankaj Gupta
2025-04-04 16:50             ` Frank Li
2025-03-26 18:38 ` [PATCH v14 5/6] firmware: imx: device context dedicated to priv Pankaj Gupta
2025-03-26 15:34   ` Frank Li
2025-03-26 18:38 ` [PATCH v14 6/6] firmware: drivers: imx: adds miscdev Pankaj Gupta
2025-03-26 16:00   ` Frank Li
     [not found]     ` <AM9PR04MB8604940F813742ACA6CA307595AC2@AM9PR04MB8604.eurprd04.prod.outlook.com>
2025-04-02  6:19       ` Pankaj Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250327-imx-se-if-v14-3-2219448932e4@nxp.com \
    --to=pankaj.gupta@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox