[PATCH AUTOSEL 6.1 02/12] scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()

[PATCH AUTOSEL 6.1 02/12] scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit 3d101165e72316775947d71321d97194f03dfef3 ]

Ensure clocks are enabled before configuring unipro. Additionally move
the pre_link() hook before the exynos_ufs_phy_init() calls. This means
the register write sequence more closely resembles the ordering of the
downstream driver.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-1-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/host/ufs-exynos.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index c0030a03dd34d..3c10029723c79 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -984,9 +984,14 @@ static int exynos_ufs_pre_link(struct ufs_hba *hba)
 	exynos_ufs_config_intr(ufs, DFES_DEF_L4_ERRS, UNIPRO_L4);
 	exynos_ufs_set_unipro_pclk_div(ufs);
 
+	exynos_ufs_setup_clocks(hba, true, PRE_CHANGE);
+
 	/* unipro */
 	exynos_ufs_config_unipro(ufs);
 
+	if (ufs->drv_data->pre_link)
+		ufs->drv_data->pre_link(ufs);
+
 	/* m-phy */
 	exynos_ufs_phy_init(ufs);
 	if (!(ufs->opts & EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR)) {
@@ -994,11 +999,6 @@ static int exynos_ufs_pre_link(struct ufs_hba *hba)
 		exynos_ufs_config_phy_cap_attr(ufs);
 	}
 
-	exynos_ufs_setup_clocks(hba, true, PRE_CHANGE);
-
-	if (ufs->drv_data->pre_link)
-		ufs->drv_data->pre_link(ufs);
-
 	return 0;
 }
 
-- 
2.39.5

[PATCH AUTOSEL 6.1 12/12] spi: spi-imx: Add check for spi_imx_setupxfer()

[Sasha Levin]

From: Tamura Dai <kirinode0@gmail.com>

[ Upstream commit 951a04ab3a2db4029debfa48d380ef834b93207e ]

Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
 Call trace:
  0x0
  spi_imx_pio_transfer+0x50/0xd8
  spi_imx_transfer_one+0x18c/0x858
  spi_transfer_one_message+0x43c/0x790
  __spi_pump_transfer_message+0x238/0x5d4
  __spi_sync+0x2b0/0x454
  spi_write_then_read+0x11c/0x200

Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20250417011700.14436-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-imx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index df73a2c7120c9..13a6ebef01894 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1605,10 +1605,13 @@ static int spi_imx_transfer_one(struct spi_controller *controller,
 				struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
+	int ret;
 	struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller);
 	unsigned long hz_per_byte, byte_limit;
 
-	spi_imx_setupxfer(spi, transfer);
+	ret = spi_imx_setupxfer(spi, transfer);
+	if (ret < 0)
+		return ret;
 	transfer->effective_speed_hz = spi_imx->spi_bus_clk;
 
 	/* flush rxfifo before transfer */
-- 
2.39.5