Re: [PATCH 4/5] arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board

[Yixun Lan <dlan@gentoo.org>]

Hi Andre,

On 01:43 Thu 24 Apr     , Andre Przywara wrote:
> On Wed, 23 Apr 2025 22:03:25 +0800
> Yixun Lan <dlan@gentoo.org> wrote:
> 
> Hi Yixun,
> 
> > On Radxa A5E board, the EMAC0 connect to an external YT8531C PHY,
> > which features a 25MHz crystal, and using PH8 pin as PHY reset.
> > 
> > Tested on A5E board with schematic V1.20.
> 
> Can you please add a name to the /aliases node, to make U-Boot add a
> MAC address?
> 	ethernet0 = &emac0;
> 
> > 
> > Signed-off-by: Yixun Lan <dlan@gentoo.org>
> > ---
> >  arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts | 17 +++++++++++++++++
> >  1 file changed, 17 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts
> > index 912e1bda974ce5f64c425e371357b1a78b7c13dd..b3399a28badb5172801e47b8a45d5b753fc56ef1 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts
> > @@ -54,6 +54,23 @@ &ehci1 {
> >  	status = "okay";
> >  };
> >  
> > +&emac0 {
> > +	phy-mode = "rgmii";
> > +	phy-handle = <&ext_rgmii_phy>;
> 
> Can you please add the phy-supply here, which should be CLDO3? It's
> referenced by other nodes, so would be enabled already,but each node
> should be self-contained.
right, I was about to check and then forgot.. will add it back next version

-- 
Yixun Lan (dlan)