[PATCH v2 2/3] spi: cs42l43: Make handling missing spk-id GPIOs explicit

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

gpiod_get_array_optional() for spk-id GPIOs can return NULL, if they are
missing, so do not pass the value to PTR_ERR but instead explicitly
treat NULL as acceptable condition.  The old code was correct, but
misleading because PTR_ERR usually is used on errors.

Reported by Smatch:
  drivers/spi/spi-cs42l43.c:241 cs42l43_get_speaker_id_gpios() warn: passing zero to 'PTR_ERR'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/spi/spi-cs42l43.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-cs42l43.c b/drivers/spi/spi-cs42l43.c
index ceefc253c54904b51a12ff112988d1dfbeed39c1..b28a840b3b04b5a4cce15539188bca02bf36716a 100644
--- a/drivers/spi/spi-cs42l43.c
+++ b/drivers/spi/spi-cs42l43.c
@@ -237,7 +237,9 @@ static int cs42l43_get_speaker_id_gpios(struct cs42l43_spi *priv, int *result)
 	int i, ret;
 
 	descs = gpiod_get_array_optional(priv->dev, "spk-id", GPIOD_IN);
-	if (IS_ERR_OR_NULL(descs))
+	if (!descs)
+		return 0;
+	else if (IS_ERR(descs))
 		return PTR_ERR(descs);
 
 	spkid = 0;

-- 
2.45.2