[PATCH AUTOSEL 5.15 021/153] wifi: mt76: only mark tx-status-failed frames as ACKed on mt76x0/2

[PATCH AUTOSEL 5.15 021/153] wifi: mt76: only mark tx-status-failed frames as ACKed on mt76x0/2

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 0c5a89ceddc1728a40cb3313948401dd70e3c649 ]

The interrupt status polling is unreliable, which can cause status events
to get lost. On all newer chips, txs-timeout is an indication that the
packet was either never sent, or never acked.
Fixes issues with inactivity polling.

Link: https://patch.msgid.link/20250311103646.43346-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76.h       | 1 +
 drivers/net/wireless/mediatek/mt76/mt76x0/pci.c | 3 ++-
 drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 3 ++-
 drivers/net/wireless/mediatek/mt76/mt76x2/pci.c | 3 ++-
 drivers/net/wireless/mediatek/mt76/mt76x2/usb.c | 3 ++-
 drivers/net/wireless/mediatek/mt76/tx.c         | 3 ++-
 6 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 27f04fb2796d7..5a90fa556203f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -345,6 +345,7 @@ struct mt76_hw_cap {
 #define MT_DRV_RX_DMA_HDR		BIT(3)
 #define MT_DRV_HW_MGMT_TXQ		BIT(4)
 #define MT_DRV_AMSDU_OFFLOAD		BIT(5)
+#define MT_DRV_IGNORE_TXS_FAILED	BIT(6)
 
 struct mt76_driver_ops {
 	u32 drv_flags;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c b/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
index b795e7245c075..3255f9c0ef71f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
@@ -151,7 +151,8 @@ mt76x0e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	static const struct mt76_driver_ops drv_ops = {
 		.txwi_size = sizeof(struct mt76x02_txwi),
 		.drv_flags = MT_DRV_TX_ALIGNED4_SKBS |
-			     MT_DRV_SW_RX_AIRTIME,
+			     MT_DRV_SW_RX_AIRTIME |
+			     MT_DRV_IGNORE_TXS_FAILED,
 		.survey_flags = SURVEY_INFO_TIME_TX,
 		.update_survey = mt76x02_update_channel,
 		.tx_prepare_skb = mt76x02_tx_prepare_skb,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
index f2b2fa7338457..7a4d62bff28ff 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
@@ -209,7 +209,8 @@ static int mt76x0u_probe(struct usb_interface *usb_intf,
 			 const struct usb_device_id *id)
 {
 	static const struct mt76_driver_ops drv_ops = {
-		.drv_flags = MT_DRV_SW_RX_AIRTIME,
+		.drv_flags = MT_DRV_SW_RX_AIRTIME |
+			     MT_DRV_IGNORE_TXS_FAILED,
 		.survey_flags = SURVEY_INFO_TIME_TX,
 		.update_survey = mt76x02_update_channel,
 		.tx_prepare_skb = mt76x02u_tx_prepare_skb,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c b/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c
index 5cd0379d86de8..4e369bd87c900 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c
@@ -22,7 +22,8 @@ mt76x2e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	static const struct mt76_driver_ops drv_ops = {
 		.txwi_size = sizeof(struct mt76x02_txwi),
 		.drv_flags = MT_DRV_TX_ALIGNED4_SKBS |
-			     MT_DRV_SW_RX_AIRTIME,
+			     MT_DRV_SW_RX_AIRTIME |
+			     MT_DRV_IGNORE_TXS_FAILED,
 		.survey_flags = SURVEY_INFO_TIME_TX,
 		.update_survey = mt76x02_update_channel,
 		.tx_prepare_skb = mt76x02_tx_prepare_skb,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
index 9369515f36a3a..09b01e09bcfe0 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
@@ -29,7 +29,8 @@ static int mt76x2u_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
 	static const struct mt76_driver_ops drv_ops = {
-		.drv_flags = MT_DRV_SW_RX_AIRTIME,
+		.drv_flags = MT_DRV_SW_RX_AIRTIME |
+			     MT_DRV_IGNORE_TXS_FAILED,
 		.survey_flags = SURVEY_INFO_TIME_TX,
 		.update_survey = mt76x02_update_channel,
 		.tx_prepare_skb = mt76x02u_tx_prepare_skb,
diff --git a/drivers/net/wireless/mediatek/mt76/tx.c b/drivers/net/wireless/mediatek/mt76/tx.c
index 134a735a06329..3fbf0153d13ca 100644
--- a/drivers/net/wireless/mediatek/mt76/tx.c
+++ b/drivers/net/wireless/mediatek/mt76/tx.c
@@ -93,7 +93,8 @@ __mt76_tx_status_skb_done(struct mt76_dev *dev, struct sk_buff *skb, u8 flags,
 	__skb_unlink(skb, &dev->status_list);
 
 	/* Tx status can be unreliable. if it fails, mark the frame as ACKed */
-	if (flags & MT_TX_CB_TXS_FAILED) {
+	if (flags & MT_TX_CB_TXS_FAILED &&
+	    (dev->drv->drv_flags & MT_DRV_IGNORE_TXS_FAILED)) {
 		info->status.rates[0].count = 0;
 		info->status.rates[0].idx = -1;
 		info->flags |= IEEE80211_TX_STAT_ACK;
-- 
2.39.5

[PATCH AUTOSEL 5.15 039/153] ASoC: mediatek: mt6359: Add stub for mt6359_accdet_enable_jack_detect

[Sasha Levin]

From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

[ Upstream commit 0116a7d84b32537a10d9bea1fd1bfc06577ef527 ]

Add a stub for mt6359_accdet_enable_jack_detect() to prevent linker
failures in the machine sound drivers calling it when
CONFIG_SND_SOC_MT6359_ACCDET is not enabled.

Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-3-7828e835ff4b@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/mt6359-accdet.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/soc/codecs/mt6359-accdet.h b/sound/soc/codecs/mt6359-accdet.h
index c234f2f4276a1..78ada3a5bfae5 100644
--- a/sound/soc/codecs/mt6359-accdet.h
+++ b/sound/soc/codecs/mt6359-accdet.h
@@ -123,6 +123,15 @@ struct mt6359_accdet {
 	struct workqueue_struct *jd_workqueue;
 };
 
+#if IS_ENABLED(CONFIG_SND_SOC_MT6359_ACCDET)
 int mt6359_accdet_enable_jack_detect(struct snd_soc_component *component,
 				     struct snd_soc_jack *jack);
+#else
+static inline int
+mt6359_accdet_enable_jack_detect(struct snd_soc_component *component,
+				 struct snd_soc_jack *jack)
+{
+	return -EOPNOTSUPP;
+}
+#endif
 #endif
-- 
2.39.5

[PATCH AUTOSEL 5.15 049/153] arm64/mm: Check PUD_TYPE_TABLE in pud_bad()

[Sasha Levin]

From: Ryan Roberts <ryan.roberts@arm.com>

[ Upstream commit bfb1d2b9021c21891427acc86eb848ccedeb274e ]

pud_bad() is currently defined in terms of pud_table(). Although for some
configs, pud_table() is hard-coded to true i.e. when using 64K base pages
or when page table levels are less than 3.

pud_bad() is intended to check that the pud is configured correctly. Hence
let's open-code the same check that the full version of pud_table() uses
into pud_bad(). Then it always performs the check regardless of the config.

Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250221044227.1145393-7-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/pgtable.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index b5e969bc074d3..a0bfa9cd76dab 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -623,7 +623,8 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 	pr_err("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
 
 #define pud_none(pud)		(!pud_val(pud))
-#define pud_bad(pud)		(!pud_table(pud))
+#define pud_bad(pud)		((pud_val(pud) & PUD_TYPE_MASK) != \
+				 PUD_TYPE_TABLE)
 #define pud_present(pud)	pte_present(pud_pte(pud))
 #define pud_leaf(pud)		(pud_present(pud) && !pud_table(pud))
 #define pud_valid(pud)		pte_valid(pud_pte(pud))
-- 
2.39.5

[PATCH AUTOSEL 5.15 068/153] pinctrl: bcm281xx: Use "unsigned int" instead of bare "unsigned"

[Sasha Levin]

From: Artur Weber <aweber.kernel@gmail.com>

[ Upstream commit 07b5a2a13f4704c5eae3be7277ec54ffdba45f72 ]

Replace uses of bare "unsigned" with "unsigned int" to fix checkpatch
warnings. No functional change.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/20250303-bcm21664-pinctrl-v3-2-5f8b80e4ab51@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/bcm/pinctrl-bcm281xx.c | 44 +++++++++++++-------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
index fbfddcc39d5cc..6ab3481ba902a 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
@@ -79,7 +79,7 @@ static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI;
 struct bcm281xx_pin_function {
 	const char *name;
 	const char * const *groups;
-	const unsigned ngroups;
+	const unsigned int ngroups;
 };
 
 /*
@@ -91,10 +91,10 @@ struct bcm281xx_pinctrl_data {
 
 	/* List of all pins */
 	const struct pinctrl_pin_desc *pins;
-	const unsigned npins;
+	const unsigned int npins;
 
 	const struct bcm281xx_pin_function *functions;
-	const unsigned nfunctions;
+	const unsigned int nfunctions;
 
 	struct regmap *regmap;
 };
@@ -948,7 +948,7 @@ static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = {
 };
 
 static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev,
-						  unsigned pin)
+						  unsigned int pin)
 {
 	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
 
@@ -992,7 +992,7 @@ static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
 }
 
 static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-						   unsigned group)
+						   unsigned int group)
 {
 	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
 
@@ -1000,9 +1000,9 @@ static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
 }
 
 static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-					   unsigned group,
+					   unsigned int group,
 					   const unsigned **pins,
-					   unsigned *num_pins)
+					   unsigned int *num_pins)
 {
 	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
 
@@ -1014,7 +1014,7 @@ static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
 
 static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
 					  struct seq_file *s,
-					  unsigned offset)
+					  unsigned int offset)
 {
 	seq_printf(s, " %s", dev_name(pctldev->dev));
 }
@@ -1036,7 +1036,7 @@ static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
 }
 
 static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
-						 unsigned function)
+						 unsigned int function)
 {
 	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
 
@@ -1044,9 +1044,9 @@ static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
 }
 
 static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
-					   unsigned function,
+					   unsigned int function,
 					   const char * const **groups,
-					   unsigned * const num_groups)
+					   unsigned int * const num_groups)
 {
 	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
 
@@ -1057,8 +1057,8 @@ static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
 }
 
 static int bcm281xx_pinmux_set(struct pinctrl_dev *pctldev,
-			       unsigned function,
-			       unsigned group)
+			       unsigned int function,
+			       unsigned int group)
 {
 	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
 	const struct bcm281xx_pin_function *f = &pdata->functions[function];
@@ -1089,7 +1089,7 @@ static const struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = {
 };
 
 static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
-					   unsigned pin,
+					   unsigned int pin,
 					   unsigned long *config)
 {
 	return -ENOTSUPP;
@@ -1098,9 +1098,9 @@ static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
 
 /* Goes through the configs and update register val/mask */
 static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev,
-				   unsigned pin,
+				   unsigned int pin,
 				   unsigned long *configs,
-				   unsigned num_configs,
+				   unsigned int num_configs,
 				   u32 *val,
 				   u32 *mask)
 {
@@ -1214,9 +1214,9 @@ static const u16 bcm281xx_pullup_map[] = {
 
 /* Goes through the configs and update register val/mask */
 static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
-				   unsigned pin,
+				   unsigned int pin,
 				   unsigned long *configs,
-				   unsigned num_configs,
+				   unsigned int num_configs,
 				   u32 *val,
 				   u32 *mask)
 {
@@ -1284,9 +1284,9 @@ static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
 
 /* Goes through the configs and update register val/mask */
 static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
-				    unsigned pin,
+				    unsigned int pin,
 				    unsigned long *configs,
-				    unsigned num_configs,
+				    unsigned int num_configs,
 				    u32 *val,
 				    u32 *mask)
 {
@@ -1328,9 +1328,9 @@ static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
 }
 
 static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
-					   unsigned pin,
+					   unsigned int pin,
 					   unsigned long *configs,
-					   unsigned num_configs)
+					   unsigned int num_configs)
 {
 	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
 	enum bcm281xx_pin_type pin_type;
-- 
2.39.5

[PATCH AUTOSEL 5.15 073/153] clk: imx8mp: inform CCF of maximum frequency of clocks

[Sasha Levin]

From: Ahmad Fatoum <a.fatoum@pengutronix.de>

[ Upstream commit 06a61b5cb6a8638fa8823cd09b17233b29696fa2 ]

The IMX8MPCEC datasheet lists maximum frequencies allowed for different
modules. Some of these limits are universal, but some depend on
whether the SoC is operating in nominal or in overdrive mode.

The imx8mp.dtsi currently assumes overdrive mode and configures some
clocks in accordance with this. Boards wishing to make use of nominal
mode will need to override some of the clock rates manually.

As operating the clocks outside of their allowed range can lead to
difficult to debug issues, it makes sense to register the maximum rates
allowed in the driver, so the CCF can take them into account.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-imx8m-clk-v4-6-b7697dc2dcd0@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-imx8mp.c | 151 +++++++++++++++++++++++++++++++++++
 1 file changed, 151 insertions(+)

diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index 0f9ec5e0f5f81..0541ddfdf1020 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -8,6 +8,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/units.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -405,11 +406,151 @@ static const char * const imx8mp_clkout_sels[] = {"audio_pll1_out", "audio_pll2_
 static struct clk_hw **hws;
 static struct clk_hw_onecell_data *clk_hw_data;
 
+struct imx8mp_clock_constraints {
+	unsigned int clkid;
+	u32 maxrate;
+};
+
+/*
+ * Below tables are taken from IMX8MPCEC Rev. 2.1, 07/2023
+ * Table 13. Maximum frequency of modules.
+ * Probable typos fixed are marked with a comment.
+ */
+static const struct imx8mp_clock_constraints imx8mp_clock_common_constraints[] = {
+	{ IMX8MP_CLK_A53_DIV,             1000 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ENET_AXI,             266666667 }, /* Datasheet claims 266MHz */
+	{ IMX8MP_CLK_NAND_USDHC_BUS,       266666667 }, /* Datasheet claims 266MHz */
+	{ IMX8MP_CLK_MEDIA_APB,            200 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_HDMI_APB,             133333333 }, /* Datasheet claims 133MHz */
+	{ IMX8MP_CLK_ML_AXI,               800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_AHB,                  133333333 },
+	{ IMX8MP_CLK_IPG_ROOT,              66666667 },
+	{ IMX8MP_CLK_AUDIO_AHB,            400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_DISP2_PIX,      170 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_DRAM_ALT,             666666667 },
+	{ IMX8MP_CLK_DRAM_APB,             200 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_CAN1,                  80 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_CAN2,                  80 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_PCIE_AUX,              10 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_I2C5,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_I2C6,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_SAI1,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_SAI2,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_SAI3,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_SAI5,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_SAI6,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_ENET_QOS,             125 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ENET_QOS_TIMER,       200 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ENET_REF,             125 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ENET_TIMER,           125 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ENET_PHY_REF,         125 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_NAND,                 500 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_QSPI,                 400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_USDHC1,               400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_USDHC2,               400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_I2C1,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_I2C2,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_I2C3,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_I2C4,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_UART1,                 80 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_UART2,                 80 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_UART3,                 80 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_UART4,                 80 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ECSPI1,                80 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ECSPI2,                80 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_PWM1,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_PWM2,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_PWM3,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_PWM4,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_GPT1,                 100 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPT2,                 100 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPT3,                 100 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPT4,                 100 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPT5,                 100 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPT6,                 100 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_WDOG,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_IPP_DO_CLKO1,         200 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_IPP_DO_CLKO2,         200 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_HDMI_REF_266M,        266 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_USDHC3,               400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_MIPI_PHY1_REF,  300 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_DISP1_PIX,      250 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_CAM2_PIX,       277 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_LDB,            595 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_MIPI_TEST_BYTE, 200 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ECSPI3,                80 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_PDM,                  200 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_SAI7,                  66666667 }, /* Datasheet claims 66MHz */
+	{ IMX8MP_CLK_MAIN_AXI,             400 * HZ_PER_MHZ },
+	{ /* Sentinel */ }
+};
+
+static const struct imx8mp_clock_constraints imx8mp_clock_nominal_constraints[] = {
+	{ IMX8MP_CLK_M7_CORE,           600 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ML_CORE,           800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU3D_CORE,        800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU3D_SHADER_CORE, 800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU2D_CORE,        800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_AUDIO_AXI_SRC,     600 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_HSIO_AXI,          400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_ISP,         400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_VPU_BUS,           600 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_AXI,         400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_HDMI_AXI,          400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU_AXI,           600 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU_AHB,           300 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_NOC,               800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_NOC_IO,            600 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ML_AHB,            300 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_VPU_G1,            600 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_VPU_G2,            500 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_CAM1_PIX,    400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_VPU_VC8000E,       400 * HZ_PER_MHZ }, /* Datasheet claims 500MHz */
+	{ IMX8MP_CLK_DRAM_CORE,         800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GIC,               400 * HZ_PER_MHZ },
+	{ /* Sentinel */ }
+};
+
+static const struct imx8mp_clock_constraints imx8mp_clock_overdrive_constraints[] = {
+	{ IMX8MP_CLK_M7_CORE,            800 * HZ_PER_MHZ},
+	{ IMX8MP_CLK_ML_CORE,           1000 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU3D_CORE,        1000 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU3D_SHADER_CORE, 1000 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU2D_CORE,        1000 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_AUDIO_AXI_SRC,      800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_HSIO_AXI,           500 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_ISP,          500 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_VPU_BUS,            800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_AXI,          500 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_HDMI_AXI,           500 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU_AXI,            800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GPU_AHB,            400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_NOC,               1000 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_NOC_IO,             800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_ML_AHB,             400 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_VPU_G1,             800 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_VPU_G2,             700 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_MEDIA_CAM1_PIX,     500 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_VPU_VC8000E,        500 * HZ_PER_MHZ }, /* Datasheet claims 400MHz */
+	{ IMX8MP_CLK_DRAM_CORE,         1000 * HZ_PER_MHZ },
+	{ IMX8MP_CLK_GIC,                500 * HZ_PER_MHZ },
+	{ /* Sentinel */ }
+};
+
+static void imx8mp_clocks_apply_constraints(const struct imx8mp_clock_constraints constraints[])
+{
+	const struct imx8mp_clock_constraints *constr;
+
+	for (constr = constraints; constr->clkid; constr++)
+		clk_hw_set_rate_range(hws[constr->clkid], 0, constr->maxrate);
+}
+
 static int imx8mp_clocks_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np;
 	void __iomem *anatop_base, *ccm_base;
+	const char *opmode;
 	int err;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mp-anatop");
@@ -720,6 +861,16 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 
 	imx_check_clk_hws(hws, IMX8MP_CLK_END);
 
+	imx8mp_clocks_apply_constraints(imx8mp_clock_common_constraints);
+
+	err = of_property_read_string(np, "fsl,operating-mode", &opmode);
+	if (!err) {
+		if (!strcmp(opmode, "nominal"))
+			imx8mp_clocks_apply_constraints(imx8mp_clock_nominal_constraints);
+		else if (!strcmp(opmode, "overdrive"))
+			imx8mp_clocks_apply_constraints(imx8mp_clock_overdrive_constraints);
+	}
+
 	err = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
 	if (err < 0) {
 		dev_err(dev, "failed to register hws for i.MX8MP\n");
-- 
2.39.5

[PATCH AUTOSEL 5.15 076/153] ARM: at91: pm: fix at91_suspend_finish for ZQ calibration

[Sasha Levin]

From: Li Bin <bin.li@microchip.com>

[ Upstream commit bc4722c3598d0e2c2dbf9609a3d3198993093e2b ]

For sama7g5 and sama7d65 backup mode, we encountered a "ZQ calibrate error"
during recalibrating the impedance in BootStrap.
We found that the impedance value saved in at91_suspend_finish() before
the DDR entered self-refresh mode did not match the resistor values. The
ZDATA field in the DDR3PHY_ZQ0CR0 register uses a modified gray code to
select the different impedance setting.
But these gray code are incorrect, a workaournd from design team fixed the
bug in the calibration logic. The ZDATA contains four independent impedance
elements, but the algorithm combined the four elements into one. The elements
were fixed using properly shifted offsets.

Signed-off-by: Li Bin <bin.li@microchip.com>
[nicolas.ferre@microchip.com: fix indentation and combine 2 patches]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Tested-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Tested-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/28b33f9bcd0ca60ceba032969fe054d38f2b9577.1740671156.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-at91/pm.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 91efc3d4de61d..777a8834b43e2 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -350,11 +350,12 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
-	unsigned char modified_gray_code[] = {
-		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
-		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
-		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
-		0x10, 0x11,
+	/* SYNOPSYS workaround to fix a bug in the calibration logic */
+	unsigned char modified_fix_code[] = {
+		0x00, 0x01, 0x01, 0x06, 0x07, 0x0c, 0x06, 0x07, 0x0b, 0x18,
+		0x0a, 0x0b, 0x0c, 0x0d, 0x0d, 0x0a, 0x13, 0x13, 0x12, 0x13,
+		0x14, 0x15, 0x15, 0x12, 0x18, 0x19, 0x19, 0x1e, 0x1f, 0x14,
+		0x1e, 0x1f,
 	};
 	unsigned int tmp, index;
 	int i;
@@ -365,25 +366,25 @@ static int at91_suspend_finish(unsigned long val)
 		 * restore the ZQ0SR0 with the value saved here. But the
 		 * calibration is buggy and restoring some values from ZQ0SR0
 		 * is forbidden and risky thus we need to provide processed
-		 * values for these (modified gray code values).
+		 * values for these.
 		 */
 		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
 
 		/* Store pull-down output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] = modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDO_OFF;
 
 		/* Store pull-up output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PUO_OFF;
 
 		/* Store pull-down on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDODT_OFF;
 
 		/* Store pull-up on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SRO_PUODT_OFF;
 
 		/*
 		 * The 1st 8 words of memory might get corrupted in the process
-- 
2.39.5

[PATCH AUTOSEL 5.15 077/153] drm/mediatek: mtk_dpi: Add checks for reg_h_fre_con existence

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit 8c9da7cd0bbcc90ab444454fecf535320456a312 ]

In preparation for adding support for newer DPI instances which
do support direct-pin but do not have any H_FRE_CON register,
like the one found in MT8195 and MT8188, add a branch to check
if the reg_h_fre_con variable was declared in the mtk_dpi_conf
structure for the probed SoC DPI version.

As a note, this is useful specifically only for cases in which
the support_direct_pin variable is true, so mt8195-dpintf is
not affected by any issue.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-6-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 9518672dc21b3..3f39109b69154 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -346,12 +346,13 @@ static void mtk_dpi_config_swap_input(struct mtk_dpi *dpi, bool enable)
 
 static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
 {
-	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
+	if (dpi->conf->reg_h_fre_con)
+		mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
 }
 
 static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
 {
-	if (dpi->conf->edge_sel_en)
+	if (dpi->conf->edge_sel_en && dpi->conf->reg_h_fre_con)
 		mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
 }
 
-- 
2.39.5

[PATCH AUTOSEL 5.15 079/153] PCI: brcmstb: Expand inbound window size up to 64GB

[Sasha Levin]

From: Stanimir Varbanov <svarbanov@suse.de>

[ Upstream commit 25a98c727015638baffcfa236e3f37b70cedcf87 ]

The BCM2712 memory map can support up to 64GB of system memory, thus
expand the inbound window size in calculation helper function.

The change is safe for the currently supported SoCs that have smaller
inbound window sizes.

Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Jim Quinlan <james.quinlan@broadcom.com>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20250224083559.47645-7-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-brcmstb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 6a676bde5e2c6..7121270787899 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -308,8 +308,8 @@ static int brcm_pcie_encode_ibar_size(u64 size)
 	if (log2_in >= 12 && log2_in <= 15)
 		/* Covers 4KB to 32KB (inclusive) */
 		return (log2_in - 12) + 0x1c;
-	else if (log2_in >= 16 && log2_in <= 35)
-		/* Covers 64KB to 32GB, (inclusive) */
+	else if (log2_in >= 16 && log2_in <= 36)
+		/* Covers 64KB to 64GB, (inclusive) */
 		return log2_in - 15;
 	/* Something is awry so disable */
 	return 0;
-- 
2.39.5

[PATCH AUTOSEL 5.15 080/153] PCI: brcmstb: Add a softdep to MIP MSI-X driver

[Sasha Levin]

From: Stanimir Varbanov <svarbanov@suse.de>

[ Upstream commit 2294059118c550464dd8906286324d90c33b152b ]

Then the brcmstb PCIe driver and MIP MSI-X interrupt controller
drivers are built as modules there could be a race in probing.

To avoid this, add a softdep to MIP driver to guarantee that
MIP driver will be load first.

Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20250224083559.47645-5-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-brcmstb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 7121270787899..e984b57dd0d89 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1352,3 +1352,4 @@ module_platform_driver(brcm_pcie_driver);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Broadcom STB PCIe RC driver");
 MODULE_AUTHOR("Broadcom");
+MODULE_SOFTDEP("pre: irq_bcm2712_mip");
-- 
2.39.5

[PATCH AUTOSEL 5.15 081/153] firmware: arm_ffa: Set dma_mask for ffa devices

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit cc0aac7ca17e0ea3ca84b552fc79f3e86fd07f53 ]

Set dma_mask for FFA devices, otherwise DMA allocation using the device pointer
lead to following warning:

WARNING: CPU: 1 PID: 1 at kernel/dma/mapping.c:597 dma_alloc_attrs+0xe0/0x124

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <e3dd8042ac680bd74b6580c25df855d092079c18.1737107520.git.viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_ffa/bus.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/firmware/arm_ffa/bus.c b/drivers/firmware/arm_ffa/bus.c
index f79ba6f733ba4..27820a59ce25e 100644
--- a/drivers/firmware/arm_ffa/bus.c
+++ b/drivers/firmware/arm_ffa/bus.c
@@ -190,6 +190,7 @@ struct ffa_device *ffa_device_register(const uuid_t *uuid, int vm_id)
 	dev = &ffa_dev->dev;
 	dev->bus = &ffa_bus_type;
 	dev->release = ffa_release_device;
+	dev->dma_mask = &dev->coherent_dma_mask;
 	dev_set_name(&ffa_dev->dev, "arm-ffa-%d", id);
 
 	ffa_dev->id = id;
-- 
2.39.5

[PATCH AUTOSEL 5.15 087/153] soc: ti: k3-socinfo: Do not use syscon helper to build regmap

[Sasha Levin]

From: Andrew Davis <afd@ti.com>

[ Upstream commit a5caf03188e44388e8c618dcbe5fffad1a249385 ]

The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.

This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250123181726.597144-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/ti/k3-socinfo.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
index fd91129de6e5b..76a4e6eac8b53 100644
--- a/drivers/soc/ti/k3-socinfo.c
+++ b/drivers/soc/ti/k3-socinfo.c
@@ -58,6 +58,12 @@ k3_chipinfo_partno_to_names(unsigned int partno,
 	return -EINVAL;
 }
 
+static const struct regmap_config k3_chipinfo_regmap_cfg = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
 static int k3_chipinfo_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
@@ -65,13 +71,18 @@ static int k3_chipinfo_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct soc_device *soc_dev;
 	struct regmap *regmap;
+	void __iomem *base;
 	u32 partno_id;
 	u32 variant;
 	u32 jtag_id;
 	u32 mfg;
 	int ret;
 
-	regmap = device_node_to_regmap(node);
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = regmap_init_mmio(dev, base, &k3_chipinfo_regmap_cfg);
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-- 
2.39.5

[PATCH AUTOSEL 5.15 149/153] spi: zynqmp-gqspi: Always acknowledge interrupts

[Sasha Levin]

From: Sean Anderson <sean.anderson@linux.dev>

[ Upstream commit 89785306453ce6d949e783f6936821a0b7649ee2 ]

RXEMPTY can cause an IRQ, even though we may not do anything about it
(such as if we are waiting for more received data). We must still handle
these IRQs because we can tell they were caused by the device.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250116224130.2684544-6-sean.anderson@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-zynqmp-gqspi.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 1847e3485dfea..77aef2a265615 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -691,7 +691,6 @@ static void zynqmp_process_dma_irq(struct zynqmp_qspi *xqspi)
 static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
 {
 	struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_id;
-	irqreturn_t ret = IRQ_NONE;
 	u32 status, mask, dma_status = 0;
 
 	status = zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST);
@@ -706,27 +705,24 @@ static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
 				   dma_status);
 	}
 
-	if (mask & GQSPI_ISR_TXNOT_FULL_MASK) {
+	if (!mask && !dma_status)
+		return IRQ_NONE;
+
+	if (mask & GQSPI_ISR_TXNOT_FULL_MASK)
 		zynqmp_qspi_filltxfifo(xqspi, GQSPI_TX_FIFO_FILL);
-		ret = IRQ_HANDLED;
-	}
 
-	if (dma_status & GQSPI_QSPIDMA_DST_I_STS_DONE_MASK) {
+	if (dma_status & GQSPI_QSPIDMA_DST_I_STS_DONE_MASK)
 		zynqmp_process_dma_irq(xqspi);
-		ret = IRQ_HANDLED;
-	} else if (!(mask & GQSPI_IER_RXEMPTY_MASK) &&
-			(mask & GQSPI_IER_GENFIFOEMPTY_MASK)) {
+	else if (!(mask & GQSPI_IER_RXEMPTY_MASK) &&
+			(mask & GQSPI_IER_GENFIFOEMPTY_MASK))
 		zynqmp_qspi_readrxfifo(xqspi, GQSPI_RX_FIFO_FILL);
-		ret = IRQ_HANDLED;
-	}
 
 	if (xqspi->bytes_to_receive == 0 && xqspi->bytes_to_transfer == 0 &&
 	    ((status & GQSPI_IRQ_MASK) == GQSPI_IRQ_MASK)) {
 		zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_ISR_IDR_MASK);
 		complete(&xqspi->data_completion);
-		ret = IRQ_HANDLED;
 	}
-	return ret;
+	return IRQ_HANDLED;
 }
 
 /**
-- 
2.39.5