[PATCH v2 2/4] arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors

[Daniel Schultz <d.schultz@phytec.de>]

For every remote processor, set up dedicated memory regions and
associate the required mailbox channels. Allocate two memory areas
per remote core: one 1MB region for vring shared buffers, and
another for external memory used by the remote processor for its
resource table and trace buffer.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
---
 .../boot/dts/ti/k3-am62a-phycore-som.dtsi     | 96 +++++++++++++++++--
 1 file changed, 90 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index 147d56b87984..049aa358e796 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -59,6 +59,42 @@ linux,cma {
 			linux,cma-default;
 		};
 
+		c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x99800000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_0_memory_region: c7x-memory@99900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x99900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b800000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0xf00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -70,12 +106,6 @@ secure_ddr: optee@9e800000 {
 			alignment = <0x1000>;
 			no-map;
 		};
-
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0x01e00000>;
-			no-map;
-		};
 	};
 
 	vcc_5v0_som: regulator-vcc-5v0-som {
@@ -170,6 +200,13 @@ AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */
 	};
 };
 
+&c7x_0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
+
 &cpsw3g {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>;
@@ -200,6 +237,33 @@ &fss {
 	status = "okay";
 };
 
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -315,6 +379,16 @@ &main_pktdma {
 	bootph-all;
 };
 
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
@@ -343,3 +417,13 @@ &sdhci0 {
 	bootph-all;
 	status = "okay";
 };
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
-- 
2.25.1