[PATCH 02/14] spi: spi-fsl-dspi: Re-use one volatile regmap for both device types

[James Clark <james.clark@linaro.org>]

max_register overrides anything in the volatile ranges, so we can get
away with sharing the same one for both types. In a later commit we'll
add more devices and also read/write ranges which also override volatile
ranges so this avoids adding even more duplication.

No functional changes.

Signed-off-by: James Clark <james.clark@linaro.org>
---
 drivers/spi/spi-fsl-dspi.c | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 31ea8ce81e98..cb0e55a49eea 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -141,6 +141,7 @@ static const struct regmap_range dspi_volatile_ranges[] = {
 	regmap_reg_range(SPI_MCR, SPI_TCR),
 	regmap_reg_range(SPI_SR, SPI_SR),
 	regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
+	regmap_reg_range(SPI_SREX, SPI_SREX)
 };
 
 static const struct regmap_access_table dspi_volatile_table = {
@@ -148,18 +149,6 @@ static const struct regmap_access_table dspi_volatile_table = {
 	.n_yes_ranges	= ARRAY_SIZE(dspi_volatile_ranges),
 };
 
-static const struct regmap_range dspi_xspi_volatile_ranges[] = {
-	regmap_reg_range(SPI_MCR, SPI_TCR),
-	regmap_reg_range(SPI_SR, SPI_SR),
-	regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
-	regmap_reg_range(SPI_SREX, SPI_SREX),
-};
-
-static const struct regmap_access_table dspi_xspi_volatile_table = {
-	.yes_ranges	= dspi_xspi_volatile_ranges,
-	.n_yes_ranges	= ARRAY_SIZE(dspi_xspi_volatile_ranges),
-};
-
 enum {
 	DSPI_REGMAP,
 	DSPI_XSPI_REGMAP,
@@ -179,7 +168,7 @@ static const struct regmap_config dspi_regmap_config[] = {
 		.val_bits	= 32,
 		.reg_stride	= 4,
 		.max_register	= 0x13c,
-		.volatile_table	= &dspi_xspi_volatile_table
+		.volatile_table	= &dspi_volatile_table
 	},
 	[DSPI_PUSHR] = {
 		.name		= "pushr",

-- 
2.34.1